光学学报, 2016, 36 (10): 1012005, 网络出版: 2016-10-12   

激光直写机床系统正交性误差影响下计算全息图相位分析

Phase Analysis in Computer-Generated Hologram Induced by Direct Laser Writing Systems with Orthogonality Error
作者单位
1 中国科学院长春光学精密机械与物理研究所光学系统先进制造技术重点实验室, 吉林 长春130033
2 中国科学院大学, 北京 100049
摘要
计算全息图(CGH)在非球面、自由曲面等光学元件的高精度检测中发挥着重要作用。激光直写机床导轨的正交性误差会影响CGH 图案的绘制精度,进而在面形检测结果中引入像散误差。为定量研究激光直写机床导轨正交误差对CGH检测结果的影响,利用标量衍射理论,建立激光直写机床导轨角度误差模型,以CGH对准区域图案为例对机床导轨正交性误差的影响进行分析。实验结果表明在机床导轨正交性误差为800 μrad时的均方根(RMS)值、峰谷值(PV)值和Zernike像散系数与理论值分别相差2.26%、2.33%、1.72%,从而验证所建立误差模型的正确性。
Abstract
Computer-generated hologram (CGH) plays an important role in testing high-accuracy optical elements such as aspheric and freeform surfaces. However, the orthogonality error induced by the rails of direct laser writing systems will deteriorate the fabrication accuracy of CGH, and thus introduce astigmatism error to the testing results of surface shape. To quantitatively study the influence of orthogonality error induced by the rails of direct laser writing systems on testing results of CGH, a model of rails′ angle error of direct laser writing systems using scalar diffraction theory is established, and the impact of orthogonality error on the alignment section of the CGH is analyzed. The experimental results indicate that there is 2.26%, 2.33% and 1.72% deviation in root mean square(RMS), peak valley(PV) and Zernike astigmatic coefficient respectively with theoretical results when orthogonality error is 800 μrad, which verifies the correctness of the established error model.

郑立功, 郝腾, 国成立, 王若秋, 张志宇. 激光直写机床系统正交性误差影响下计算全息图相位分析[J]. 光学学报, 2016, 36(10): 1012005. Zheng Ligong, Hao Teng, Guo Chengli, Wang Ruoqiu, Zhang Zhiyu. Phase Analysis in Computer-Generated Hologram Induced by Direct Laser Writing Systems with Orthogonality Error[J]. Acta Optica Sinica, 2016, 36(10): 1012005.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!