中国激光, 2016, 43 (12): 1202002, 网络出版: 2016-12-09   

激光选区熔化成型零件支撑结构优化设计 下载: 640次

Optimal Design of Support Structures in Selective Laser Melting of Parts
作者单位
1 华南理工大学机械与汽车工程学院, 广东 广州 510640
2 北京大学第三医院运动医学研究所, 北京 100083
摘要
激光选区熔化(SLM)成型零件过程中常出现零件的翘曲变形,这与零件支撑的添加有关。因此,有必要对SLM成型零件支撑添加方式进行研究。通过对不同支撑结构SLM成型零件的成型效果进行研究,发现在相同支撑参数条件下,支撑片分割未倾斜支撑在成型零件时具有较好的成型效果;零件使用的支撑高度越高,零件越容易翘曲。通过优化支撑结构,发现采用分块0°倾斜导热支撑可以有效地减小零件的翘曲变形。这为SLM成型高精度零件提供了参考。
Abstract
Warping deformation often occurs during the process of selective laser melting (SLM) of parts, which is related to addition of part supports. Therefore, it is necessary to investigate the addition manner of part supports in the SLM process. The molding effects in the SLM of parts with different support structures are investigated and one found that, under the condition of same support parameters, the support sheet which is separated and non-inclined has better molding effects; the larger the height of support structure is, the stronger the warping deformation is. After the optimization of support structures, it is found that the separated and non-inclined support structure mixed with heat conduction columns can effectively reduce the warping deformation of parts. This study provides a reference basis for the molding of high precision parts by SLM.

张国庆, 杨永强, 张自勉, 宋长辉, 王安民, 余家阔. 激光选区熔化成型零件支撑结构优化设计[J]. 中国激光, 2016, 43(12): 1202002. Zhang Guoqing, Yang Yongqiang, Zhang Zimian, Song Changhui, Wang Anmin, Yu Jiakuo. Optimal Design of Support Structures in Selective Laser Melting of Parts[J]. Chinese Journal of Lasers, 2016, 43(12): 1202002.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!