中国激光, 2017, 44 (1): 0102017, 网络出版: 2017-01-10   

SiCp/Al复合材料纳秒脉冲光纤激光刻蚀 下载: 1039次

Nanosecond Pulsed Fiber Laser Ablation of SiCp/Al Composite Materials
作者单位
1 北京工业大学激光工程研究院高功率及超快激光先进制造实验室, 北京 100124
2 河北工程大学数理科学与工程学院, 河北 邯郸 056038
摘要
研究了在高压辅助气体作用下运用纳秒脉冲激光刻蚀SiC陶瓷颗粒增强Al基复合材料的可行性。结果表明, 刻蚀深度随激光能量的增加而增大。由于刻蚀过程中发生了复杂的冶金反应, 在刻蚀表面很难观察到独立的SiC颗粒。重凝层内Al、Si、C、O元素空间分布相对均匀, 其厚度和表面粗糙度随激光能量的增加而增加, 并呈饱和趋势。高压同轴气体的机械作用是材料蚀除的主要机制。
Abstract
The possibility of using nanosecond pulsed laser ablation of aluminium matrix composite reinforced with SiC ceramic particles under the assistance of high pressure gas is investigated. The results indicate that the ablation depth increases with the increase of pulse energy. It is very difficult to find the isolate SiC particle on the ablated surface due to the occurrence of complicated metallurgical reaction during the ablation process. The Al, Si, C, and O elements within the re-solidified layers have a relatively uniform distribution, and the thickness and surface roughness of the re-solidified layers increase with the increase of pulse energy, which presents a tendency of saturation. The mechanical action of high pressure co-axial gas is the key mechanism of material removal.

张寰臻, 黄婷, 肖荣诗. SiCp/Al复合材料纳秒脉冲光纤激光刻蚀[J]. 中国激光, 2017, 44(1): 0102017. Zhang Huanzhen, Huang Ting, Xiao Rongshi. Nanosecond Pulsed Fiber Laser Ablation of SiCp/Al Composite Materials[J]. Chinese Journal of Lasers, 2017, 44(1): 0102017.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!