光学学报, 2017, 37 (1): 0111002, 网络出版: 2017-01-13   

多层胶接结构胶层空气缺陷的太赫兹无损检测 下载: 608次

Terahertz Non-Destructive Inspection of Air Defect Within Adhesive Layers of Multi-Layer Bonded Structure
作者单位
1 华中科技大学武汉光电国家实验室, 湖北 武汉 430074
2 华中科技大学光学与电子信息学院, 湖北 武汉 430074
摘要
利用建筑材料、隔热垫和胶粘剂制作了胶层中含人工空气缺陷的三层胶接结构, 并利用SynViewScan 300连续太赫兹成像系统对样件进行了检测。通过分析胶接面的太赫兹二维图像及缺陷处和正常胶粘处的单点纵向信号, 获得了胶层空气缺陷的位置和大小信息。结果表明, 连续太赫兹波成像系统可以清晰识别胶接结构中的胶层空气缺陷。
Abstract
Three-layer bonded structure containing artificial air defects within adhesive layers is manufufactured with the usage of building materials, insulation mat, and adhesive, and the specimen is inspected by the SynViewScan 300 continuous terahertz imaging system. Via analysing the two-dimensional terahertz images at adhesive surface and single point longitudinal signal within defect area and normal adhesive area, the informations about position and size of air defects are acquired.The results indicate that the continuous terahertz imaging system is capable of clear identification of air defects within bonded structures.

李文军, 王天一, 周宇, 游承武, 杨振刚, 王可嘉, 刘劲松. 多层胶接结构胶层空气缺陷的太赫兹无损检测[J]. 光学学报, 2017, 37(1): 0111002. Li Wenjun, Wang Tianyi, Zhou Yu, You Chengwu, Yang Zhengang, Wang Kejia, Liu Jinsong. Terahertz Non-Destructive Inspection of Air Defect Within Adhesive Layers of Multi-Layer Bonded Structure[J]. Acta Optica Sinica, 2017, 37(1): 0111002.

本文已被 14 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!