首页 > 论文 > 激光与光电子学进展 > 54卷 > 4期(pp:41410--1)

激光冲击强化铜的表面质量和性能

Surface Quality and Property of Copper Treated by Laser Shock Peening

王峰   左慧   赵雳   陈美  
  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

为了研究激光冲击强化(LSP)对铜表面质量和性能的影响,利用Nd∶YAG激光器对铜试样进行冲击强化处理。试验结果表明,以高分子黑胶带作为吸收层时,试样的表面形貌几乎没有缺陷;随着搭接率的提高,最大硬度增加,且表面粗糙度降低。两次冲击重叠和错开的冲击方式对试样影响层深度和最大硬度的影响类似。仿真结果显示,错开的冲击方式可提高试样的残余压应力。

Abstract

In order to study the effects of laser shock peening (LSP) on surface quality and property of copper, Nd∶YAG lasers is used to treat copper samples by laser shock peening. The experimental results show that, when the polymer black tape is used as the absorption layer, there are no defects on the surface morphology of sample. With the increase of the overlap rate, the maximum hardness increases and the surface roughness decreases. The effects on the affected layer depth and the maximum hardness of sample caused by the overlapped and the staggered shock ways of two shocks are similar. The simulation results show that the staggered shock way can enhance the residual compressive stress of sample.

投稿润色
补充资料

中图分类号:TN249;TG84

DOI:10.3788/lop54.041410

所属栏目:激光器与激光光学

基金项目:国家自然科学基金(51205172,51175237)、上海交通大学机械系统与振动国家重点实验室开放基金(MSV-2015-17)、江苏省普通高校专业学位研究生创新计划(SJZZ15_0129)

收稿日期:2016-10-31

修改稿日期:2016-12-26

网络出版日期:--

作者单位    点击查看

王峰:江苏大学机械工程学院, 江苏 镇江 212013
左慧:江苏大学机械工程学院, 江苏 镇江 212013
赵雳:江苏大学机械工程学院, 江苏 镇江 212013
陈美:江苏大学机械工程学院, 江苏 镇江 212013

联系人作者:王峰(ahwangfeng1992@163.com)

备注:王峰(1992-),男,硕士研究生,主要从事激光冲击强化方面的研究。

【1】Zhang Qinglai, Wang Rong, Zhang Bingxin, et al. Effect of laser shock processing on mechanical properties and mesostructures of AZ31 magnesium alloy[J]. Chinese J Lasers, 2015, 42(3): 0303001.
张青来, 王 荣, 张冰昕, 等. 激光冲击强化对AZ31镁合金力学性能和组织结构的影响[J]. 中国激光, 2015, 42(3): 0303001.

【2】Lai Zhilin, Wang Cheng, Li Yinghong, et al. Effects of laser shock peening and ultrasonic shot peening on fatigue property of 1Cr11Ni2W2MoV stainless steel[J]. Laser & Optoelectronics Progress, 2013, 50(5): 051403.
赖志林, 汪 诚, 李应红, 等. 激光冲击强化与喷丸对1Cr11Ni2W2MoV不锈钢疲劳性能的影响[J]. 激光与光电子学进展, 2013, 50(5): 051403.

【3】Qiao Hongchao. Effect of laser peening on mechanical properties of 6082 aluminum alloy[J]. Laser & Optoelectronics Progress, 2015, 52(6): 061404.
乔红超. 激光冲击强化对6082铝合金机械性能的影响[J]. 激光与光电子学进展, 2015, 52(6): 061404.

【4】Feng Yayun, Ye Yunxia, Lian Zuchang, et al. Experimental research on effect of surface quality of copper treated by laser shock peening[J]. Laser & Optoelectronics Progress, 2015, 52(10): 101401.
冯亚云, 叶云霞, 连祖焻, 等. 激光冲击强化对铜表面质量影响的实验研究[J]. 激光与光电子学进展, 2015, 52(10): 101401.

【5】Zhang Qinglai, Zhao Bo, Zhang Bingxin, et al. Effect of multiple-laser shock processing on microstructure and residual stress of ЭП866 martensitic stainless steel[J]. Chinese J Lasers, 2016, 43(11): 1102009.
张青来, 赵 博, 张冰昕, 等. 多次激光冲击强化对ЭП866马氏体不锈钢组织及残余应力的影响[J]. 中国激光, 2016, 43(11): 1102009.

【6】Qiao Hongchao, Zhao Jibin, Yu Yanfeng. Analysis on laser processing parameters and strengthening effects of laser peening of TC4 titanium alloy[J]. Laser & Optoelectronics Progress, 2013, 50(4): 041405.
乔红超, 赵吉宾, 于彦凤. TC4钛合金激光冲击强化参数及性能分析[J]. 激光与光电子学进展, 2013, 50(4): 041405.

【7】Mc Evily A J, Renauld M, Bao H, et al. Fatigue fracture-surface roughness and the K-opening level[J]. International Journal of Fatigue, 1997, 19(8/9): 629-633.

【8】Shang Deguang, Wang Dejun. Multiaxial fatigue strength[M]. Beijing: Science Press, 2007.
尚德广, 王德俊. 多轴疲劳强度[M]. 北京: 科学出版社, 2007.

【9】Abrāo A M, Aspinwall D K. The surface integrity of turned and ground hardened bearing steel[J]. Wear, 1996, 196(1/2): 279-284.

【10】Ye Y X, Feng Y Y, Lian Z C, et al. Plastic deformation mechanism of polycrystalline copper foil shocked with femtosecond laser[J]. Applied Surface Science, 2014, 309: 240-249.

【11】Fabbro R, Fournier J, Ballard P, et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 1990, 68(2): 775-784.

【12】Devaux D, Fabbro R, Tollier L, et al. Generation of shock waves by laser-induced plasma in confined geometry[J]. Journal of Applied Physics, 1993, 74(4): 2268-2273.

【13】Niu Zhongxiu. Research on the experiments of copper thin films onto silicon wafers treated by laser shock processing[D]. Zhenjiang: Jiangsu University, 2010: 42-43.
牛忠秀. 硅基铜薄膜制备及其激光冲击改性研究[D]. 镇江: 江苏大学, 2010: 42-43.

引用该论文

Wang Feng,Zuo Hui,Zhao Li,Chen Mei. Surface Quality and Property of Copper Treated by Laser Shock Peening[J]. Laser & Optoelectronics Progress, 2017, 54(4): 041410

王峰,左慧,赵雳,陈美. 激光冲击强化铜的表面质量和性能[J]. 激光与光电子学进展, 2017, 54(4): 041410

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF