应用光学, 2017, 38 (5): 798, 网络出版: 2017-10-12  

平行光干涉投影三维形貌恢复方法

Three dimensional shape restoration method with parallel light interference projection
作者单位
华北理工大学 电气工程学院,河北 唐山 063210
摘要
传统傅立叶变换轮廓术多采用散光斜式投影,需要满足4个约束条件才能得到较为准确的相位与高度映射关系,并且散光投影带来的相位非线性二次项误差也会降低形貌恢复精度。为了能在欠约束条件下减少相位非线性误差的影响,建立了基于平行光干涉投影下的普适模型。平行光干涉投影下的参考平面相位沿着x轴呈线性变化,相位分布较散光或倾斜式投影更具准确性。对比分析了散光及平行光投影下被测物体的恢复情况,实验结果表明,新模型在欠约束条件下,具有较高的灵活性和可操作性,恢复精度良好,相对误差为1.1%。
Abstract
In traditional Fourier transform profilometry, the astigmatism projection is used and 4 constraints are needed to obtain accurate mapping relationship between phase and height . Moreover, the phase nonlinear quadratic error caused by astigmatic projection can also reduce the topographic recovery accuracy. In order to reduce the influence of phase nonlinearity in less restricted conditions, a universal model based on parallel optical interference projection was established. The reference plane phase under the parallel optical interference projection changes linearly along x-axis, the phase distribution is more accurate than the astigmatic projection or oblique projection. The restoration of the measured object under astigmatism and parallel light projection was compared and analyzed. The experimental results show that the new model has high flexibility and operability under less restricted conditions, and the recovery accuracy is good, the relative error is 1.1%.

王一, 刘会艳, 宋宝根. 平行光干涉投影三维形貌恢复方法[J]. 应用光学, 2017, 38(5): 798. Wang Yi, Liu Huiyan, Song Baogen. Three dimensional shape restoration method with parallel light interference projection[J]. Journal of Applied Optics, 2017, 38(5): 798.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!