中国光学, 2018, 11 (2): 248, 网络出版: 2018-05-29   

基于散斑干涉的光滑表面变形快速检测

Fast detection of smooth surface deformation based on DSPI
作者单位
合肥工业大学 仪器科学与光电工程学院, 安徽 合肥 230009
摘要
针对目前光滑表面力学性能测试困难的情况, 建立了一种改进的数字激光散斑干涉测量系统。首先通过新的散斑干涉光路设计实现散斑照射, 同时采用空间载波傅里叶变换法, 对光滑零件加载变形的动态散斑干涉图像进行处理, 最后得到光滑表面的变形场分布情况。该方法不对被测表面进行任何处理, 可实现光滑表面的高精度全场变形测量。实验结果表明: 最大变形处为镜面板的中央, 测得最大变形量分别为1936、1861和1797 μm, 与中心变形预设值接近。该方法光路简单、测量方案切实可行, 能够实现光滑表面变形的快速动态测量。
Abstract
In view of the difficulty of testing the mechanical properties of smooth surface, a measuring system based on improved digital laser speckle interferometry is established. First, speckle illumination is achieved by designing a new speckle interferometer optical path. At the same time, the dynamic speckle interferograms of the smooth parts are processed using the spatial-carrier Fourier transform method. Finally, the distribution of the deformation field of the smooth surface is obtained. This method does not perform any processing on the surface to be measured, which enables high-precision full-field deformation measurement on a smooth surface. The experimental results show that the maximum deformation is at the center of the mirror plate and the maximum deformation is 1936, 1861 and 1797 μm, respectively, which is close to the preset value of center deformation. The method has simple optical path, a practical measurement scheme,which can realize fast dynamic measurement of smooth surface deformation.

涂思琪, 王永红, 孙方圆, 高新亚, 赵琪涵, 闫佩正. 基于散斑干涉的光滑表面变形快速检测[J]. 中国光学, 2018, 11(2): 248. TU Si-qi, WANG Yong-hong, SUN Fang-yuan, GAO Xin-ya, ZHAO Qi-han, YAN Pei-zheng. Fast detection of smooth surface deformation based on DSPI[J]. Chinese Optics, 2018, 11(2): 248.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!