激光与光电子学进展, 2018, 55 (7): 071401, 网络出版: 2018-07-20   

基于相机式激光光束参数测量精度的影响因素分析 下载: 891次

Analysis of the Influence Factors on High Precision Measurement of Laser Beam Parameter Based on Camera
作者单位
1 天津大学精密仪器与光电子工程学院, 天津 300072
2 珠海光库科技股份有限公司, 广东 珠海 519000
摘要
针对相机式光束质量分析仪测量光束的结果不一致问题,分析了相关参数对测量误差的影响。基于高斯光束模型,并添加与实际对应的噪声,根据ISO 11146标准计算了光斑直径。结合实验测试时的实际操作过程,提炼出光强饱和度、积分面积比、信噪比和光斑尺寸4个关键参数。不仅阐明了相机参数对测量误差影响的关键趋势,还分析了各个参数之间的关联影响,最终对如何选择相机的像元、像素、动态范围、暗噪声,以及如何设置积分时间、计算区域等提出了更明确的要求。
Abstract
To tackle the problem that the camera-based beam analyzer often gives the different results of the laser beam quality, we analyze the impact of the relevant parameters on the measurement error of the laser beam. The beam diameter is calculated by the ISO 11146 standard based on the Gaussian model with the noise level corresponding to the real one. According to the actual operation during testing, four parameters are analyzed, including the light intensity saturation, integral area ratio, signal to noise ratio and actual beam size. Compared with the prior works, we found the key trend of the camera parameters on the measurement error and the correlation between the parameters, which will be helpful to put forward more specific requirements on how to choose the camera and how to set the integration time and the calculation area.

肖青, 刘侠, 邓剑钦, 姚建铨, 张大鹏, 王兴龙. 基于相机式激光光束参数测量精度的影响因素分析[J]. 激光与光电子学进展, 2018, 55(7): 071401. Xiao Qing, Liu Xia, Deng Jianqin, Yao Jianquan, Zhang Dapeng, Wang Xinglong. Analysis of the Influence Factors on High Precision Measurement of Laser Beam Parameter Based on Camera[J]. Laser & Optoelectronics Progress, 2018, 55(7): 071401.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!