应用激光, 2018, 38 (5): 847, 网络出版: 2018-12-18  

选频放大的高峰值功率飞秒光纤激光系统的研究

Research on High Peak Power Femtosecond Fiber Laser System with Frequency-selecting Amplification
作者单位
1 华南师范大学广东省微纳光子功能材料与器件重点实验室, 广东 广州 510006
2 大族激光科技产业集团股份有限公司, 广东 深圳 518052
摘要
为获得更窄脉宽, 更高峰值功率的激光输出, 基于非线性偏振旋转锁模原理和啁啾脉冲放大技术, 利用声光调制器降低重复频率, 报道了一种掺镱飞秒光纤激光系统。振荡器内利用光栅和准直器共同作用, 实现了输出脉冲的中心波长和光谱宽度同时可调节。系统最终获得了重复频率1 MHz, 脉宽218 fs, 平均功率2.2 W的脉冲激光输出, 峰值功率达10 MW, 在高精度微加工领域有着很好的应用前景。
Abstract
In order to obtain a narrow pulse width and higher peak power laser output, a Yb-doped femtosecond fiber laser system is reported based on nonlinear polarization rotation mode-locking principle and chirped-pulse amplification, using an acousto-optic modulator to reduce the repetition frequency. Using the grating and collimator in the oscillator, the center wavelength and spectral width of the output pulse can be adjusted simultaneously. The system finally demonstrates a pulsed laser output of 2.2 W average power at a repetition rate of 1 MHz, corresponding to the pulse duration of 218 fs. The peak power is up to 10 MW, which has a good application prospect in the field of high-precision micromachining.

任博, 汪鸿伟, 欧尚明, 郭亮, 张庆茂, 吕启涛. 选频放大的高峰值功率飞秒光纤激光系统的研究[J]. 应用激光, 2018, 38(5): 847. Ren Bo, Wang Hongwei, Ou Shangming, Guo Liang, Zhang Qingmao, Lv Qitao. Research on High Peak Power Femtosecond Fiber Laser System with Frequency-selecting Amplification[J]. APPLIED LASER, 2018, 38(5): 847.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!