强激光与粒子束, 2019, 31 (2): 021001, 网络出版: 2019-04-02   

脉冲氙灯电源研究

Pulsed xenon lamp power supply
作者单位
中国科学院 上海光学精密机械研究所, 上海 201800
摘要
高速摄影的同步照明光源是利用脉冲氙灯作为输出负载的一种高亮度闪光光源。它的驱动电路采用脉冲形成网络PFN电路, 利用Orcad Pspice软件对PFN放电电流仿真, 其仿真结果具有一定的指导意义。电源具有手动触发和同步触发功能, 同时输出脉冲的前沿和后沿具有良好的时间响应, 氙灯充电电压0~3.5 kV可调, 触发信号与光波形延时时间125 μs; 实验结果验证了电源设计原理和技术方案的可行性。
Abstract
The synchronous lighting source of high-speed photography is a kind of high brightness flash light source which uses the pulsed xenon lamp as the output load. Its driving circuit adopts pulse forming network PFN circuit, using Orcad Pspice software to simulate the discharge current of FFN, its simulation result has certain guiding significance. The power supply has the function of manual trigger and synchronous trigger, the front and back edges of the output pulse have good time response. The charge voltage of xenon lamp is 0~3.5 kV, and the delay time of trigger signal and optical waveform is 125 μs with light wave shape. The design principle and technical scheme of the power supply are proved by the experiment.

邵若燕, 刘建军, 吴睿骅, 梁海荣, 李海兵. 脉冲氙灯电源研究[J]. 强激光与粒子束, 2019, 31(2): 021001. Shao Ruoyan, Liu Jianjun, Wu Ruihua, Liang Hairong, Li Haibing. Pulsed xenon lamp power supply[J]. High Power Laser and Particle Beams, 2019, 31(2): 021001.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!