中国激光, 2020, 47 (3): 0301003, 网络出版: 2020-03-12   

全固态腔内和频单纵模593.5 nm黄光激光器 下载: 914次

All Solid-State Intracavity Sum-Frequency Single-Longitudinal-Mode 593.5 nm Yellow Lasers
作者单位
长春理工大学理学院, 吉林 长春 130000
摘要
设计了一种结构紧凑、性能稳定、成本低的腔内和频单纵模593.5 nm黄光激光器。采用线性平凹腔结构,LD端面泵浦Nd∶YVO4晶体产生1064 nm和1342 nm双波长激光束;通过KTP(KTiOPO4)Ⅱ类临界相位匹配在腔内和频产生593.5 nm连续黄光激光输出。利用由单个布氏片(BP)与和频晶体KTP构成的双折射滤波片进行选频,在泵浦功率为5.0 W时,593.5 nm和频光单纵模输出功率为30 mW,方均根噪声为0.8%,线宽为150 MHz。此时,检测到1064 nm和1342 nm基频光均为单纵模状态。实验结果表明,在和频激光器中,利用双折射滤波片技术使得基频光次振荡纵模损耗≥1.5%,即可以实现单纵模和频激光输出。
Abstract
Herein, an intracavity single-longitudinal-mode 593.5 nm yellow lasers with compact structure, stable performance, and low cost is designed. A laser diode end-pumped Nd∶YVO4 crystal is used to produce 1064 nm and 1342 nm dual-wavelength laser beams with a linear flat-cavity structure. The intracavity sum-frequency mixing of the 593.5 nm continuous yellow laser output is achieved via KTP Ⅱ-type critical phase matching. The Brewster plate (BP) and sum-frequency crystal KTP are used as a birefringent filter for frequency selection. When the pump power is 5.0 W, the single-longitudinal-mode output power at 593.5 nm is 30 mW, root-mean-square noise is 0.8%, and line width is 150 MHz. For this condition, the fundamental light at 1064 and 1342 nm is detected to be in the single-longitudinal-mode state. Experimental results show that the single-longitudinal-mode sum-frequency laser is achieved using the birefringent filter technique for a loss of more than 1.5% for the adjacent fundamental mode.

李萌萌, 杨飞, 赵上龙, 高兰兰. 全固态腔内和频单纵模593.5 nm黄光激光器[J]. 中国激光, 2020, 47(3): 0301003. Li Mengmeng, Yang Fei, Zhao Shanglong, Gao Lanlan. All Solid-State Intracavity Sum-Frequency Single-Longitudinal-Mode 593.5 nm Yellow Lasers[J]. Chinese Journal of Lasers, 2020, 47(3): 0301003.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!