[1] KONG D P. Research on key technologies of design, fabrication and application of micro-structured optical components[D]. Beijing: Graduate University of Chinese Academy of Sciences, 2013.

[2] SHAHA K S R, KHALEQUE A. Low-loss single-mode modified conjoined tube hollow-core fiber[J]. Applied optics, 2021, 60(21): 6243-6250.

[3] SHAHA K S R, KHALEQUE A, HOSEN M S. Wideband low loss hollow core fiber with nested hybrid cladding elements[J]. Journal of lightwave technology, 2021, 39(20): 6585-6591.

[4] MOHD ARIF N A A, BURHANUDDIN D D, SHAARI S, et al. Bend loss fiber optics design based on sinusoidal and ellipse configurations[J]. Optica applicata, 2021, 51(3).

[5] ROMAN M, ZHU C, O’Malley R J, et al. Distributed fiber-optic sensing with low bending loss based on thin-core fiber[J]. IEEE sensors journal, 2021, 21(6): 7672-7680.

[6] LI Y Q, LIU Y R, WANG L, et al. Design of experimental system for measurement of fiber loss spectrum[J]. Experimental technology and management, 2020, 37(5): 173-175.

[7] LI Y Q, FAN H, WANG L, et al. Bend-tolerant fiber sensor based on BOTDR system[J]. Optoelectronics letters, 2022, 18(6): 343-348.

[8] WU C, XU L X, ZHANG X M. Study on the variation of optical fiber bending loss coefficient with environment[J]. Journal of quantum electronics, 2018, 35(6): 752-758.

[9] WU C. Study on mechanical strength and bending loss of optical fiber with environmental changes[D]. Heifei: University of Science and Technology of China, 2018.

[10] WANG X, LOU S Q, XING Z. Loss characteristics of hollow core photonic band gap fiber[J]. Infrared and laser engineering, 2019, 48(S2): 103-108.

[11] ZHANG J C, ZHANG W, YANG X N, et al. Study on transmission loss characteristics of optical fibers with different coatings under vacuum thermal environment[J]. Infrared and laser engineering, 2019, 48(11): 1-8.

[12] JIANG L, DAI S X, LIU Y X, et al. Bending characteristics of As2S3 chalcogenide glass fiber and its influence on loss[J]. Journal of silicate, 2019, 47(2): 250-254.

[13] LIAO F X, WANG X S, NIE Q H, et al. Fabrication and properties of low-loss Ge-Te-Se core-clad fiber based on extrusion technology[J]. Acta photonica sinica, 2015, 44(10): 88-93.

[14] PAN Y Z, QIU H X, ZHANG T Q, et al. Dissipative soliton resonance and noise-like pulse generation of large normal dispersion Yb-doped fiber laser[J]. Optica applicata, 2022, 52(1).

[15] SUHAIMI N A N B, MAIDI A M, ABAS P E, et al. Design and simulation of heptagonal porous core photonic crystal fiber for terahertz wave transmission[J]. Optik, 2022, 260: 169142.

[16] ZHU P, LIU P, WANG Z, et al. Evaluating and minimizing induced microbending losses in optical fiber sensors embedded into glass-fiber composites[J]. Journal of lightwave technology, 2021, 39(22): 7315-7325.

[17] WEI S, LU M, LUO Y, et al. Annealing effects on optical losses in 3D-printed silica fiber[J]. IEEE photonics technology letters, 2022, 34(4): 199-202.

[18] CUI Z, YUAN C. The effect of fusion current on thermally diffused expanded core of splicing ultra-low loss fiber and traditional single-mode fiber[J]. Optical fiber technology, 2021, 63: 102477.

[19] ZHANG A, LI Y, PAN F, et al. High sensitivity SPR refractive index sensor with high resolution based on anti-resonance fiber[J]. Optoelectronics letters, 2022, 18(4): 0204-0209.

[20] CUI W, ZHOU Y, YAN Z, et al. Simulation and experimental verification of off-axis fiber Bragg grating bending sensor with high refractive index modulation[J]. Optoelectronics letters, 2022, 18(4): 0200-0203.

[21] WANG W M, SHI C Y, DASTAN Z. Intelligent contract experimental platform based on block chain technology[J]. Experiment technology and management, 2019, 36(3): 86-91.

[22] JIN W X et al. Strict dual-mode large-mode-area fiber with multicore structure[J]. Optics communications, 2016, 366: 308-313.

[23] WAN K T, LEUNG C Y. Applications of a distributed fiber optic crack sensor for concrete structures[J]. Sensors and actuators A: physical, 2007, 135(2): 458-464.

[24] ZHAO Z. Optical fiber communication engineering: communication engineering series[M]. Beijing: Beijing Posts and Telecommunications Press, 2001.

[25] ZHANG C F, FU K, MA B J, et al. Wheel wound optical cable tensile testing device[J]. Machine tools and hydraulics, 2017, 45(1): 92-95.

[26] LU J L, ZHANG X M. Optical cable direct pull tensile test device based on BOTDR[J]. Optical fiber and cable and its application technology, 2005, (2): 17-19.

[27] WANG S. Research on optical fiber loss detection technology for optical communication infrastructure construction [D]. Changchun: Jilin University, 2018.

[28] GLAESEMANN G S. Advancements in mechanical strength and reliability of optical fibers[J]. Reliability of optical fibers and optical fiber systems: a critical review, SPIE, 1999, 10295(9): 5-27.