应用激光, 2023, 43 (2): 34, 网络出版: 2023-03-30  

胞元尺寸对选区激光熔化18Ni300正六边形蜂窝结构轴向压缩性能影响研究

Effect of Cell Size on Axial Compression Properties of 18Ni300 Hexagonal Honeycomb Structure by Selective Laser Melting
作者单位
1 昆明理工大学材料科学与工程学院, 云南 昆明 650093
2 昆明理工大学机电工程学院, 云南 昆明 650500
3 昆明理工大学建筑工程学院, 云南 昆明 650500
摘要
为明确胞元尺寸对正六边形薄壁蜂窝结构的轴向承载与压缩性能的影响, 通过选区激光熔化制备了直径10 mm、高度15 mm、壁厚0.1 mm、填充胞元尺寸分别为1.75 mm、2.25 mm、2.75 mm和5 mm的正六边形18Ni300薄壁正六边形蜂窝试样, 通过轴向压缩分析了试样的承载能力和缓冲吸能性能。结果表明, 胞元尺寸2.25 mm以上的试样压缩时发生叠缩变形, 且随着胞元尺寸减小, 单位体积承载力和比吸能增加; 但当胞元尺寸减小到1.75 mm时, 试样压缩时发生外翻撕裂破坏, 单位体积承载力和比吸能显著下降。
Abstract
In order to clarify the effect of cell size on the axial load capacity and compression properties of hexagonal thin-walled honeycomb structures, hexagonal 18Ni300 thin-walled honeycomb samples of 10 mm in diameter, 15 mm in height and 0.1 mm in thickness with different cell size of 1.75 mm, 2.25 mm, 2.75 mm and 5 mm filled were fabricated by selective laser melting. Static axial compression tests of the samples were performed, and load capacity and specific energy absorption performance of the samples were analyzed. Results show that the samples with cell size above 2.25 mm are compressed by stacking during compression, and the load capacity per unit volume and specific energy absorption increase as the cell size decrease. However, for the sample with cell size of 1.75 mm, it is damaged by outward tearing mode during axial compression with significant decrease of load capacity per unit volume and specific energy absorption.
参考文献

[1] 王涛, 徐冲, 路媛媛, 等. WC体积分数对激光熔注WC/NiBSi复合材料层组织和性能的影响[J]. 应用激光, 2018, 38(4): 517-521.

[2] 王飞, 李宜泽, 周凯, 等. Al含量对SLM制备原位自生Ti-Ti3Al复合材料力学性能的影响[J]. 应用激光, 2021, 41(2): 211-220.

[3] 徐慧燕, 黎振华, 滕宝仁, 等. 空间结构增强铜基复合材料的摩擦磨损特征[J]. 摩擦学学报, 2019, 39(5): 611-618.

[4] 赵向坤, 王雅雷, 熊翔, 等. 叠层缝合结构C/C-SiC复合材料微观结构与弯曲性能[J]. 中国有色金属学报, 2021, 31(7): 1869-1878.

[5] 罗子艺, 杨永强, 王迪, 等. 选区激光熔化直接制造网格结构零件[J]. 应用激光, 2010, 30(4): 323-328.

[6] PEHLIVAN L, BAYKASOLU C. An experimental study on the compressive response of CFRP honeycombs with various cell configurations[J]. Composites Part B: Engineering, 2019, 162: 653-661.

[7] KHAN M K, BAIG T, MIRZA S. Experimental investigation of in-plane and out-of-plane crushing of aluminum honeycomb[J]. Materials Science and Engineering: A, 2012, 539: 135-142.

[8] 曾寿金, 刘广, 李传生, 等. 基于SLM的股骨柄多孔结构设计与力学性能分析[J]. 中国激光, 2022, 49(2): 0202016.

[9] 张博, 曹毅, 王玲, 等. 选区激光熔化体心立方多孔结构的各向异性[J]. 中国激光, 2017, 44(8): 0802005.

[10] 张喆, 王霏, 张际亮, 等. 选区激光熔化成形多孔钴铬合金的单元结构对力学性能的影响[J]. 应用激光, 2018, 38(6): 915-919.

[11] 张国庆, 杨永强, 宋长辉, 等. 激光选区熔化成型CoCrMo多孔结构的设计与性能研究[J]. 中国激光, 2015, 42(11): 1103003.

[12] 朱翔, 尹曜, 王蕊, 等. 泡沫铝填充薄壁铝合金多胞构件与单胞构件吸能性能研究[J]. 工程力学, 2021, 38(5): 247-256.

[13] 王宏权, 王耀, 王士龙, 等. 3D打印随机蜂窝夹芯圆管结构的准静态轴向压溃性能研究[J]. 实验力学, 2021, 36(3): 397-413.

黎振华, 李颢, 姚碧波, 解靖伟, 郭涛. 胞元尺寸对选区激光熔化18Ni300正六边形蜂窝结构轴向压缩性能影响研究[J]. 应用激光, 2023, 43(2): 34. Li Zhenhua, Li Hao, Yao Bibo, Xie Jingwei, Guo Tao. Effect of Cell Size on Axial Compression Properties of 18Ni300 Hexagonal Honeycomb Structure by Selective Laser Melting[J]. APPLIED LASER, 2023, 43(2): 34.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!