低含量碳化钨对激光熔覆镍基复合涂层性能影响
[1] ETSION I, SHER E. Improving fuel efficiency with laser surface textured piston rings[J]. Tribology International, 2009, 42(4): 542-547.
[2] AHMED N. Direct metal fabrication in rapid prototyping: a review[J]. Journal of Manufacturing Processes, 2019, 42: 167-191.
[3] CHEIKH H E,COURANT B,BRANCHU S,et al.Analysis and prediction of single laser tracks geometrical characteristics in coaxial laser cladding process[J]. Optics and Lasers in Engineering, 2012, 50(3): 413-422.
[4] 刘钊鹏, 顾俊, 王健超, 等. WC-Co硬质合金涂层的激光熔覆工艺研究[J]. 应用激光, 2021, 41(4): 715-723.
[6] WENG F, YU H J, CHEN C Z, et al. Microstructures and wear properties of laser cladding Co-based composite coatings on Ti-6Al-4V[J]. Materials & Design, 2015, 80: 174-181.
[7] 刘化强, 刘江伟, 国凯, 等. 激光定向能量沉积Inconel 718特征与工艺参数优化[J]. 应用激光, 2021, 41(1): 13-21.
[8] 刘政, 吴强, 林继兴, 等. Ni基WC合金3D激光熔覆工艺研究[J]. 材料导报, 2016, 30(S2): 64-67.
[9] 黄蕾, 周建忠, 徐家乐, 等. H13钢表面激光熔覆NiCr/Cr3C2涂层组织及其摩擦学性能[J]. 应用激光, 2019, 39(4): 556-562.
[10] 李英, 李平. 激光熔覆制备抗冲蚀磨损镍基复合涂层的研究进展[J]. 材料导报, 2021, 35(15): 15162-15168.
[11] 褚清坤, 闫星辰, 岳术俊, 等. 激光选区熔化成形Ti-12Mo-6Zr-2Fe(TMZF)合金微观组织及力学性能的研究[J]. 材料研究与应用, 2021, 15(4): 350-357.
[12] LIU Y, XU T H, LIU Y, et al. Wear and heat shock resistance of Ni-WC coating on mould copper plate fabricated by laser[J]. Journal of Materials Research and Technology, 2020, 9(4): 8283-8288.
[13] 戎磊, 黄坚, 李铸国, 等. 激光熔覆WC颗粒增强Ni基合金涂层的组织与性能[J]. 中国表面工程, 2010, 23(6): 40-44.
[14] GARCA A, FERNNDEZ M R, CUETOS J M, et al. Study of the sliding wear and friction behavior of WC + NiCrBSi laser cladding coatings as a function of actual concentration of WC reinforcement particles in ball-on-disk test[J]. Tribology Letters, 2016, 63(3): 41.
[15] 段文军, 李贞, 王好平, 等. 盾构滚刀材料表面镍基碳化钨涂层摩擦学性能研究[J]. 表面技术, 2021, 50(1): 313-321.
[16] 王亚楠, 刘涛, 郭章伟, 等. Ni-WC涂层在饱和H2S溶液中的磨损和腐蚀行为[J]. 中国表面工程, 2019, 32(4): 63-73.
冯煜哲, 王岳亮, 刘文文, 马清, 邓朝阳, 卢冰文, 李福海. 低含量碳化钨对激光熔覆镍基复合涂层性能影响[J]. 应用激光, 2023, 43(2): 26. Feng Yuzhe, Wang Yueliang, Liu Wenwen, Ma Qing, Deng Zhaoyang, Lu Bingwen, Li Fuhai. Effect of Low Content of Tungsten Carbide on the Performance of Nickel-Based Composite Coatings by Laser Cladding[J]. APPLIED LASER, 2023, 43(2): 26.