作者单位
摘要
1 安徽建筑大学工程机械智能制造重点实验室,安徽 合肥 230601
2 安徽春谷3D打印智能装备产业技术研究院,安徽 芜湖 241000
Finally, the limitations of laser processing at present are summarized, and the application and development of laser micromachining technology in the field of medical equipment in the future are prospected. Although laser microprocessing technology can micro-process a new generation of implantable medical devices with extremely fine structure, making the commercial use of the next generation of implantable medical devices feasible, the development of laser micro-processing technology in the biomedical field is not mature enough, the production efficiency is low, and the work stability needs to be improved. For the laser micromachining process, a complete set of theories has not yet been formed to explain the physical nature of the interaction between the laser and material under the extreme conditions of ultra-fast, ultra-short, and ultra-strong, nor can the impact of laser micromachining on the material structure and physical and chemical properties be well evaluated. The next work still needs a lot of basic and regular research. At the same time, according to the characteristics of laser micromachining and the properties of the processed materials, it is also necessary to develop simulation analysis software to simulate the micromachining process and optimize the parameters of the laser micromachining process.
激光微细加工 血管支架 骨支架 生物材料 抗菌性 laser micromachining vascular stent bone stent biological materials antibacterial 
光电工程
2023, 50(3): 220306
作者单位
摘要
1 安徽科技学院理学院, 安徽 凤阳 233100
2 华南师范大学激光加工技术实验室, 广东 广州 510631
简要概述了血管支架的制备过程。从激光器和加工材料的选择, 支架结构的设计, 激光切割工艺参数的优化, 辅助路径的设置以及血管支架的后序处理等方面探讨了这些因素对血管支架加工质量的影响情况。
血管支架 激光器 制备 影响因素 cardiovascular stent laser fabrication influence factors 
激光生物学报
2011, 20(2): 274
作者单位
摘要
1 安徽科技学院理学院, 安徽 凤阳 233100
2 华南师范大学信息光电子科技学院, 广东 广州 510631
采用光纤激光器对血管支架进行了激光切割工艺研究,通过实验获得了聚焦透镜焦距及焦点位置、输出功率、切割速度、脉冲频率、脉冲宽度、辅助气体种类及压强等工艺参数对切缝宽度和缝面质量的影响规律。结果表明:缝宽随输出功率、频率、脉宽及辅助氧压的增大而增加,随着切割速度的增加而减小。在实验的基础上找出了血管支架切割的最佳工艺参数,在316LVM不锈钢细管上(管壁厚度为0.12mm,直径为2mm)获得了切缝均匀,缝宽小于20μm网状结构的血管支架。
激光切割 血管支架 光纤激光器 工艺参数 laser cutting cardiovascular stent fiber laser technological parameter 
应用光学
2009, 30(4): 678
作者单位
摘要
暨南大学生物医学工程研究所,广东,广州,510632
以聚左旋乳酸(PLLA)为原料,采用CAD软件进行支架设计,并以设计的支架模型为原型,用CO2激光器加工出可降解冠状动脉血管支架,进一步采用SEM、FTIR分析研究.结果表明,根据PLLA力学性能与金属材质的差异,以增大梁宽和用圆弧连接支撑单元的设计可提高支架的径向承受力;CO2激光加工精度可满足需要,加工使支架表面更光滑,对PLLA材料的化学组成影响不大,激光加工工艺适合于加工生物可降解血管支架.
聚左旋乳酸 血管支架 可降解材料 CAD设计 激光加工 
应用激光
2007, 27(3): 224

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!