作者单位
摘要
1 安徽建筑大学工程机械智能制造重点实验室,安徽 合肥 230601
2 安徽春谷3D打印智能装备产业技术研究院,安徽 芜湖 241000
Finally, the limitations of laser processing at present are summarized, and the application and development of laser micromachining technology in the field of medical equipment in the future are prospected. Although laser microprocessing technology can micro-process a new generation of implantable medical devices with extremely fine structure, making the commercial use of the next generation of implantable medical devices feasible, the development of laser micro-processing technology in the biomedical field is not mature enough, the production efficiency is low, and the work stability needs to be improved. For the laser micromachining process, a complete set of theories has not yet been formed to explain the physical nature of the interaction between the laser and material under the extreme conditions of ultra-fast, ultra-short, and ultra-strong, nor can the impact of laser micromachining on the material structure and physical and chemical properties be well evaluated. The next work still needs a lot of basic and regular research. At the same time, according to the characteristics of laser micromachining and the properties of the processed materials, it is also necessary to develop simulation analysis software to simulate the micromachining process and optimize the parameters of the laser micromachining process.
激光微细加工 血管支架 骨支架 生物材料 抗菌性 laser micromachining vascular stent bone stent biological materials antibacterial 
光电工程
2023, 50(3): 220306
杨蒙蒙 1,2伍言龙 3陈旭 3,4任辉 4[ ... ]刘亚雄 1,*
作者单位
摘要
1 季华实验室, 佛山 528200
2 新疆大学机械工程学院, 乌鲁木齐 830017
3 佛山科学技术学院机电工程与自动化学院, 佛山 528000
4 西安交通大学机械制造系统工程国家重点实验室, 西安 710049
利用光固化技术制备的生物玻璃陶瓷骨植入物在骨修复领域具有许多优势, 然而生物玻璃陶瓷受粉体粒度的影响, 在光固化打印工艺、结构、力学性能和生物性能等方面存在较大的差异。本文以光固化3D打印过程中粒度的变化为切入点, 制备了两种不同粒度粉体的生物玻璃陶瓷浆料, 分别对生物玻璃陶瓷浆料的稳定性、流变特性和固化特性进行了表征, 根据TG-DSC曲线绘制了脱脂烧结曲线并对骨支架的表面质量、结构和力学性能进行了评价, 最后通过颅骨修复试验对降解性能进行了分析。结果表明: 小粒度粉体的浆料稳定性较好, 黏度较高, 对应的固化厚度和过固化宽度也较小; 小粒度粉体制备的骨支架表面质量、结构致密化程度和弯曲强度均优于大粒度粉体制备的骨支架, 但降解速率较低, 植入体内2个月后有新骨长入骨支架孔隙。本研究对不同粒度粉体的生物玻璃陶瓷骨支架制备具有指导意义, 有助于推动基于粒度分布的梯度可控降解骨支架的开发和应用。
生物玻璃陶瓷 骨支架 光固化技术 3D打印 粒度 降解性能 bioglass ceramics bone scaffold photocuring technology 3D printing particle size degradation performance 
硅酸盐通报
2023, 42(1): 267

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!