光学学报, 2013, 33 (8): 0812002, 网络出版: 2013-07-16   

光电积分式光源颜色照度测量仪器的滤光片优化设计

Filter Optimization Design for Photoelectric Integral Light Source Color Illumination Instrument
作者单位
1 浙江大学 现代光学仪器国家重点实验室, 浙江 杭州 310027
2 中国计量学院光学与电子科技学院, 浙江 杭州 310018
3 深圳汉谱光彩科技有限公司, 广州 深圳 518000
摘要
介绍了一种光电积分式光源颜色照度测量仪器中的滤光片优化设计方法。研究了实际测量时由于光束斜入射导致的滤光片光谱透射率与垂直入射的不同所导致的设计误差,建立了漫入射有色玻璃透射率的修正模型,提出了一种基于修正模型的滤光片匹配方法,应用于颜色照度测量仪器的设计。设计了实验对匹配结果进行验证,实验结果证明修正模型有效地减小了设计误差。
Abstract
Filter optimization design method of photoelectric integral light source color illumination instruments is introduced. The design error is caused by the beam oblique incidence which leads to the filter spectral transmittance different from that under of normal incidence. The diffuse incident colored glass transmittance correction model is established. The model is applied to the color illuminance measurement instrument design. Experiments are designed to verify the matching results, and the experimental results demonstrate that the correction model reduces the design error effectively.

袁琨, 严惠民, 金尚忠, 王聪. 光电积分式光源颜色照度测量仪器的滤光片优化设计[J]. 光学学报, 2013, 33(8): 0812002. Yuan Kun, Yan Huimin, Jin Shangzhong, Wang Cong. Filter Optimization Design for Photoelectric Integral Light Source Color Illumination Instrument[J]. Acta Optica Sinica, 2013, 33(8): 0812002.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!