硬质合金激光毛化工艺试验研究
[1] TIAN L M, REN L Q, HAN Z W, et al. Applications of anti-adhesion and anti-resistance of biomimetic non-smooth surface in engineering[J]. Transactions of the Chinese Society for Aagricultural Mmachinery, 2005, 36(3): 138-142(in Chinese).
[2] CHEN Z K, LU S C, SONG X B, et al. Effects of bionic units on the fatigue wear of gray cast ironsurface with different shapes and distributions[J]. Optics and Laser Technology,2015, 66(3):166-174.
[3] VILHENA L M, SEDLACEK M, PODGORNIK B, et al. Surface texturing by pulsed Nd∶YAG laser[J]. Tribology International,2009, 42(10):1496-1504.
[4] DUNN A,CARSTENSEN J V, WLODARCZYK K L, et al. Nanosecond laser texturing for high friction Applications[J]. Optics and Lasers in Engineering, 2014, 62(11): 9-16.
[6] LIU Y, CHEN D R, YANG W Y. Experimental investigation oflaser-textured on roller with micro-convextopography[J]. Chinese Journal of Mechanical Engineering,2003,39(7):107-110(in Chinese).
[7] DU D, HE Y F, SUI B. Laser texturing of rollers by pulsed Nd∶YAG laser [J]. Journal of Materials Processing Technology, 2005, 161(3): 456-461.
[8] CHEN G N. A new method of textured surface of roll and its application [J].Applied Laser, 1996,16(4):155-158(in Chinese).
[9] CHILAMAKURI S, BHUSHAN B. Effect of peak radius on design of W-type donut shaped laser textured surfaces [J]. Wear, 1999, 230(2): 118-123.
[11] XU H. Analytical and experimental investigation on the formabilities of axisymmetric dies by composite laser surface texturing[D].Zhengjiang: Jiangsu University, 2012:56-67 (in Chinese).
[12] FU Y H, FU H, XU H, et al. Experiment of laser texturing process and mechanical properties of textures[J].Journal of Jiangsu University(Natural Science Edition),2013,34(2): 206-211(in Chinese).
[13] BENNETT T D, KRAJNOVICH D J, GRIGOROPOULOS C P. Marangoni mechanism in pulsed laser texturing of magnetic disk substrates [J]. Journal of Heat Transfer, 1997, 119(3): 589-596.
[14] XU B Q, WANG H, XU G D, et al. Numerical modeling of laser-induced molten pool for laser interaction with metal material[J].Journal of Jiangsu University (Natural Science Edition), 2010,31(3) : 358-362(in Chinese).
[15] CHEN S C, CAHILL D G, GRIGOROPOULOS C P. Melting and surface deformation in pulsed laser surface micro-modification of Ni-P disks [J]. Journal of Heat Transfer, 2000, 122(1): 107-112.
符永宏, 顾亚励, 康正阳, 王海波, 李玉弟. 硬质合金激光毛化工艺试验研究[J]. 激光技术, 2016, 40(4): 512. FU Yonghong, GU Yali, KANG Zhengyang, WANG Haibo, LI Yudi. Experimental research of laser texturing of cemented carbide[J]. Laser Technology, 2016, 40(4): 512.