基于在线观察的激光焊接凝固热裂纹敏感性研究
温鹏, 荻崎贤二, 山本元道. 基于在线观察的激光焊接凝固热裂纹敏感性研究[J]. 中国激光, 2011, 38(6): 0603005.
Wen Peng, Shinozaki Kenji, Yamamoto Motomichi. Evaluation of Solidification Cracking Susceptibility during Laser Welding by In-situ Observation Method[J]. Chinese Journal of Lasers, 2011, 38(6): 0603005.
[1] S. Kou. Welding Metallurgy［M］. New Jersey: John Wiley & Sons, 2002. 263~295
[2] Feng Zhili. A Methodology for Quantifying the Thermal and Mechanical Conditions for Weld Metal Solidification Cracking［D］. Columbus: Ohio State University, 1993
[3] T. P. Shankar, P. S. Gill. S. L. Mannna et al.. Criteria for hot cracking evaluation in austenitic stainless steel welds using longitudinal varestraint and transvarestraint tests［J］. Sci. Technol. Weld Joining, 2000, 5(2): 91～97
[4] T. Senda, F. Matsuda. Studies on solidification cracking susceptibility for weld metals with trans-varestraint test［J］. J. Jpn. Weld Soc., 1972, 41(6): 709～723
[5] F. Matsuda, H. Nakagawa, S. Tomita et al.. Investigation of weld solidification cracking by MISO technique-1［J］. Q. J. Jpn. Weld Soc., 1988, 6(3): 394～400
[6] F. Matsuda, H. Nakagawa, S. Tomita et al.. Investigation of weld solidification cracking by MISO technique-2［J］. Q. J. Jpn. Weld Soc., 1988, 6(3): 401～405
[7] P. Wen, K. Shinozaki, M. Yamamoto et al..In-situ observation of solidification cracking of laser dissimilar welded joints［J］. Q. J. Jpn. Weld Soc., 2009, 27(2): 134～138
[8] 孟宣宣, 王春明, 胡席远. 光纤激光焊接熔池和小孔的高速摄像与分析［J］. 电焊机, 2010, (11): 78～81
Meng Xuanxuan, Wang Chunming, Hu Xiyuan. High-speed photograph and the analysis of the welding pool and keyhole in fiber laser welding［J］. Electric Weld Machine, 2010, (11): 78～81
[9] R. Fabbro. Melt pool and keyhole behavior analysis for deep penetration laser welding［J］. J. Phys. D., 2010, 43(44): 445501
[10] Y. Kawahito, N. Matsumoto, M. Mizutani et al.. Characterization of plasma induced during high power fiber laser welding of stainless steel［J］. Sci. Technol. Weld Joining, 2008, 13(8): 744～748
[11] Li Guohua, Cai Yan, Wu Yixiong. Stability information in plasma image of high-power CO2 laser welding［J］. Opt. Laser Eng., 2009, 47(9): 990～994
[12] 张旭东, 陈武柱, 刘春 等. CO2激光焊接的同轴检测与熔透控制［J］. 焊接学报, 2006, 27(1): 13～16
Zhang Xudong, Chen Wuzhu, Liu Chun et al.. Coaxial monitoring and penetration control in CO2 laser welding［J］. Transactions of the China Welding Institution, 2006, 27(1): 13～16
[13] 段爱琴, 胡伦骥, 王亚军. 激光深熔焊焊缝的熔透性监测研究［J］. 中国激光, 2005, 32(1): 131～134
[14] Y. H. Wei, R. P. Liu. Software package for simulation and prediction of welding solidification cracks［J］. Sci. Technol. Weld Joining, 2003, 8(5): 325～333
温鹏, 荻崎贤二, 山本元道. 基于在线观察的激光焊接凝固热裂纹敏感性研究[J]. 中国激光, 2011, 38(6): 0603005. Wen Peng, Shinozaki Kenji, Yamamoto Motomichi. Evaluation of Solidification Cracking Susceptibility during Laser Welding by In-situ Observation Method[J]. Chinese Journal of Lasers, 2011, 38(6): 0603005.
PDF全文
