铝合金电弧预熔丝激光焊工艺特性研究 下载: 562次
[1] Yang Z B, Tao W, Li L Q, et al. Double-sided laser beam welded T-joints for aluminum aircraft fuselage panels: Process, microstructure, and mechanical properties[J]. Materials & Design, 2012, 33: 652-658.
[2] Park Y W, Yu J, Rhee S. Astudy on the weld characteristics of 5182 aluminum alloy by Nd∶YAG laser welding with filler wire for car bodies[J]. International Journal of Automotive Technology, 2010, 11(5): 729-736.
[3] Sun Z, Kuo M. Bridging the joint gap with wire feed laser welding[J]. Journal of Materials Processing Technology, 1999, 87(1): 213-222.
[4] 赵 勇, 王清曌, 黄 坚, 等. 50 mm转子钢超窄间隙激光填丝焊接头组织与性能[J]. 中国激光, 2015, 42(2): 0203007.
[5] 魏 菁, 王 欢, 石少坚, 等. 10CrSiNiCu船用高强钢光纤激光焊接接头组织和性能[J]. 中国激光, 2016, 43(3): 0303003.
[6] Wu Y, Cai Y, Wang H, et al. Investigation on microstructure and properties of dissimilar joint between SA553 and SUS304 made by laser welding with filler wire[J]. Materials & Design, 2015, 87: 567-578.
[7] Salminen A S, Kujanpaa V P, Moisio T J I. Interactions between laser beam and filler metal[J]. Welding Journal, 1996, 75(1): 9s-13s.
[8] 余阳春. 激光填丝焊的焊丝熔入行为及工艺研究[D]. 武汉: 华中科技大学, 2010: 67-83.
Yu Yangchun. Study on the technology and filler wire melting dynamics during the laser welding with filler wire[D]. Wuhan: Huazhong University of Science and Technology, 2010: 67-83.
[9] Syed W U H, Li L. Effects of wire feeding direction and location in multiple layer diode laser direct metal deposition[J]. Applied Surface Science, 2005, 248(1): 518-524.
[10] 梅汉华, 肖荣诗, 左铁钏. 采用填充焊丝激光焊接工艺的研究[J]. 北京工业大学学报, 1996, 22(3): 38-42.
Mei Hanhua, Xiao Rongshi, Zuo Tiechuan. The study on laser welding with filler wire[J].Journal of Beijing Polytechnic University, 1996, 22(3): 38-42.
[11] Salminen A. The filler wire-laser beam interaction during laser welding with low alloyed steel filler wire[J]. Mechanika, 2010, (4): 67-74.
[12] 杜汉斌, 胡伦骥, 胡席远. 激光填丝焊技术[J]. 航空制造技术, 2002, 11: 60-63.
Du Hanbin, Hu Lunji, Hu Xiyuan. Technology of laser filler wire welding[J]. Aeronautical Manufacturing Technology, 2002,11: 60-63.
[13] 彭 进, 李福泉, 李俐群, 等. 激光液态填充焊与常规激光填丝焊特性的对比研究[J]. 中国激光, 2015, 42(1): 0103003.
彭进, 李俐群, 张瑞珠, 严大考. 铝合金电弧预熔丝激光焊工艺特性研究[J]. 激光与光电子学进展, 2017, 54(6): 061404. Peng Jin, Li Liqun, Zhang Ruizhu, Yan Dakao. Study on Aluminum Alloy Laser Welding with Pre-Melted Liquid Filler by Arc[J]. Laser & Optoelectronics Progress, 2017, 54(6): 061404.