光纤Round-Trip 法授时的误差分析

现有天基时间同步网络的精度限制和光钟的出现,使得光纤授时成为高精度时间同步的主要方案之一。介绍了利用密集波分复用(DWDM)技术实现单纤双向传输的Round-Trip 法授时方案,该方案抑制了利用光纤业务授时而导致的双向信道延时不对称问题。利用光纤授时系统中各模块的典型参数和信道特征分析了授时偏差和随机误差,提出了相应的补偿偏差和抑制误差的方法。理论分析表明,该方案在现有光纤中继距离上的授时精度可以达到亚纳秒量级。利用时间间隔计数器测量了50 km 光纤授时系统中主要模块的时延及其时延波动范围,实验验证了理论分析的结果。

Abstract

The emergence of optical clock and the precision limits of the existing time synchronization space-based make fiber one of the major high-precision time service systems. A Round-Trip method that uses dense wavelength division multiplexing (DWDM) technology in a single fiber and achieves bidirectional time information transfer is introduced. This method restrains the delay time asymmetry of the optical time service using fiber business channel. The time deviation and random error are analysed by using typical parameters of various modules and the character of the fiber channel in the system,and the corresponding suppression of deviation and compensation of random error methods are brought forward. Theoretical analysis shows that the method can satisfy time-precision of nanosecond order of magnitude in the existing fiber distance relay. Taking advantage of the time interval,the delay time and the time stability of the major modules in the 50 km fiber time service system are measured,verifying the theoretical analysis.

参考文献

[1] Masami Kihara,Atsushi Imaoka. System configuration for standardizing SDH-based time and frequency transfer[C]. European Frequency Time Forum,1996,418:465-470

[2] 张大元,谢毅,孟艾立等.利用光纤数字同步传送网2.048 Mbit/s支路传送高精度标准时间信号[J].现代电信技术,2006,(12):17-25

Zhang Dayuan,Xie Yi,Meng Aili et al.. Transferring high accuracy standard time signal by SDH 2.048 Mbit/s channel[J]. Modern Telecommunications Technology,2006,(12):17-25

[3] Masaki Amemiya,Michito Imae. Time and frequency transfer and dissemination methods using optical fiber network[J]. IEEE J Transactions on Fundamentals and Materials. 2006,126(6):458-463

[4] . Two-way time transfer through 2.4 Gb/s optical SDH system[J]. IEEE Trans. Instrum. Meas., 2001, 50(3): 709-715.

[5] . Accurate time/frequency transfer method using bidirectional WDM transmission[J]. IEEE Trans. Instrum. Meas., 1998, 47(2): 537-542.

[6] 赖先主. 基于光网络的高精度授时技术研究[D]. 南京:解放军理工大学,2009. 31-37

Lai Xianzhu. The Study of High Precision Time Service Basic of Optic Network[D]. Nanjing:PLA University of Science and Technology,2009. 31-37

[7] 李允博,张成良. 1.6 Tbit/s与800 Gbit/s光波分复用系统(WDM)技术要求[J]. 电信网技术,2003,(1):27-30

Li Yunbo,Zhang Chengliang. Technical standards for 1.6 Tbit/s and 800 Gbit/s optical WDM systems[J]. Telecommun Network Technol.,2003,(1):27-30

丁小玉, 卢麟, 张宝富, 代玉锋. 光纤Round-Trip 法授时的误差分析[J]. 激光与光电子学进展, 2010, 47(4): 040603. Ding Xiaoyu, Lu Lin, Zhang Baofu, Dai Yufeng. Error Analysis of Fiber Time Service Using Round-Trip Method[J]. Laser & Optoelectronics Progress, 2010, 47(4): 040603.

光纤Round-Trip 法授时的误差分析

关于本站 Cookie 的使用提示

全站搜索

光纤Round-Trip 法授时的误差分析

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索