中国激光, 2013, 40 (8): 0806002, 网络出版: 2013-07-09   

连续激光辐照材料的三维温度场

Three-Dimensional Temperature Field of Material Irradiated by Continuous Wave Laser
作者单位
南京理工大学电子工程与光电技术学院, 江苏 南京 210094
摘要
根据连续激光加热靶材的实际情况,建立了连续激光辐照材料的三维物理模型。结合实际的边界条件,采用基于积分变换的方法推导出材料的瞬态温度场的解析表达式。利用Matlab软件数值模拟了连续激光辐照材料的温升过程,分析了材料的各向异性对温度场的影响,并且讨论了激光参数、辐照时间以及环境变化对靶材温升的影响。结果表明:材料的各向异性将导致温度场的非对称温升;材料表面温升随激光功率和辐照时间的增大而增大;同时材料侧面与空气的对流换热系数对材料表面的温度场分布也起到了一定的影响。
Abstract
Based on the actual situation of continuous wave (CW) laser heating target material, the three-dimensional physical model of material irradiated by CW-laser is established. Combining with the actual boundary conditions, the analytical expression of the transient temperature field of the material is deduced based on the integral transform method. The temperature rising process of material irradiated by CW-laser is simulated numerically using Matlab software, the influences of the anisotropy of the material is analysed, and the influences of the laser parameters, irradiation time and the environmental changes on the temperature rise of the material are discussed. The results show that the anisotropy of the material will lead to an asymmetric temperature rise, the temperature rise increases with the increase of laser power and irradiating time, and the convective heat transfer coefficient between the material sides and the air plays an important role in the temperature distribution of the material.
参考文献

[1] 赵凤艳, 张季, 汪超. 连续激光辐照半导体材料的温度场[J]. 长春大学学报, 2011, 21(12): 73-76.

    Zhao Fengyan, Zhang Ji, Wang Chao. Temperature field of semiconductor materials irradiated by CW laser[J]. J Changchun University, 2011, 21(12): 73-76.

[2] 赵凤艳. 连续激光辐照金属材料和半导体材料的热效应分析[D]. 长春: 长春理工大学, 2011.

    Zhao Fenyan. Study of Thermal Effect on Metal and Semiconductor Materials Irradiated by Continuous Wave Laser[D]. Changchun: Changchun University of Science and Technology, 2011.

[3] 刘院省, 刘世炳, 陈涛. 短脉冲激光刻蚀加工铜材料的机制[J]. 强激光与粒子束, 2007, 19(8): 1271-1274.

    Liu Yuanxing, Liu Shibing, Chen Tao. Mechanism of ablation in short-pulse laser-copper target interaction[J]. High Power Laser and Particle Beams, 2007, 19(8): 1271-1274.

[4] 杨成娟, 梅雪松, 王文君, 等. 金铬薄膜的飞秒激光烧蚀加工[J]. 红外与激光工程, 2011, 40(1): 61-65.

    Yang Chengjuan, Mei Xuesong, Wang Wenjun, et al.. Femtosecond laser ablation on gold-chromium film[J]. Infrared and Laser Engineering, 2011, 40(1): 61-65.

[5] 杨森, 钟敏霖, 张庆茂, 等. 激光快速成型金属零件的新方法[J]. 激光技术, 2001, 25(4): 254-257.

    Yang Sen, Zhong Minlin, Zhang Qingmao, et al.. New techniques to rapidly manufacture metal parts with laser[J]. Laser Technology, 2001, 25(4): 254-257.

[6] 李玉华, 马法君, 戴能利, 等. 超短脉冲激光对无机硅材料的损伤[J]. 中国激光, 2007, 34(7): 1009-1013.

    Li Yuhua, Ma Fajun, Dai Nengli, et al.. Ultra-short pulsed laser-induced damage in inorganic silicon materials[J]. Chinese J Lasers, 2007, 34(7): 1009-1013.

[7] 胡鹏, 陈发良. 短脉冲激光辐照下SiO2损伤微观机理简化模型[J]. 强激光与粒子束, 2007, 19(11): 1771-1774.

    Hu Peng, Chen Faliang. A simple model of micro-damage mechanism of SiO2 under short pulse laser irradiation[J]. High Power Laser and Particle Beams, 2007, 19(11): 1771-1774.

[8] A N Burgess, K E Evans, M Mackay, et al.. Comparison of transient thermal conduction in tellurium and organic dye based digital optical storage media[J]. J Appl Phys, 1987, 61(1): 74-80.

[9] B Liu. Modeling and Study of High Density Magneto-Optic and Perpendicular Recording[D]. Manchester, UK: Department of Electrical Engineering, University of Manchester, 1993.

[10] M Mansuripur, G A N Connell, J W Goodman. Laser-induced local heating of multilayer[J]. Appl Opt, 1982, 21(6): 1106-1114.

[11] 段晓峰, 汪岳峰, 牛燕雄, 等. 激光辐照光学材料热力效应的解析计算和损伤评估[J]. 中国激光, 2004, 31(12): 1455-1459.

    Duan Xiaofeng, Wang Yuefeng, Niu Yanxiong, et al.. Analytic calculation and evaluation of thermal and mechanical damage in optical materials induced by laser[J]. Chinese J Lasers, 2004, 31(12):1455-1459.

[12] 黄峰, 牛燕雄, 汪岳峰, 等. 光学窗口材料激光辐照热力效应的解析计算研究[J]. 光学学报, 2006, 26(4): 576-580.

    Huang Feng, Niu Yanxiong, Wang Yuefeng, et al.. Calculation of thermal and mechanical effect induced by laser in optical window materials[J]. Acta Optica Sinica, 2006, 26(4): 576~580.

[13] 牛燕雄, 张书练, 姚建铨, 等. 高功率激光对光电器件的热力破坏效应[J]. 激光与光电子学进展, 2007, 44(9): 32-42.

    Niu Yanxiong, Zhang Shulian, Yao Jianquan, et al.. Thermal and mechanical breakage induced by high power laser on optical and photoelectric elements[J]. Laser & Optoelectronics Progress, 2007, 44(9): 32-42.

[14] 胡汉平. 热传导理论[M]. 合肥: 中国科学技术大学出版社, 2010.

    Hu Hanping. Heat Conduction Theory[M]. Hefei: University of Science and Technology of China Press, 2010.

[15] 苏国萍, 唐大伟, 郑兴华, 等. 3ω方法测量各向异性SiC晶体的导热系数[J]. 工程热物理学报, 32(11): 1885-1888.

    Su Guoping, Tang Dawei, Zheng Xinghua, et al.. Determination of thermal conductivity of anisotropic SiC crystal using 3ω method[J]. J Engineering Thermophysics,2011, 32(11): 1885-1888.

张英聪, 沈华, 朱日宏. 连续激光辐照材料的三维温度场[J]. 中国激光, 2013, 40(8): 0806002. Zhang Yingcong, Shen Hua, Zhu Rihong. Three-Dimensional Temperature Field of Material Irradiated by Continuous Wave Laser[J]. Chinese Journal of Lasers, 2013, 40(8): 0806002.

本文已被 11 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!