分幅相机像面一致性分析及分幅方法改进

谢洪波; 方春伦; 杨磊; 江敏; 孟庆斌; 毛晨盛

doi:doi:10.3788/gzxb20174604.0411002

光子学报, 2017, 46 (4): 0411002, 网络出版: 2017-05-03

分幅相机像面一致性分析及分幅方法改进

Analysis of Image Consistency for Framing Camera and Improvement of Framing Method

论文大纲

谢洪波 ^*方春伦杨磊江敏孟庆斌毛晨盛

作者单位

天津大学精密仪器与光电子工程学院光电信息科学技术教育部重点实验室, 天津 300072

光学设计分幅相机像面一致性光纤传像器件棱锥棱镜 Optical design Framing camera Image consistency Fiber optics imaging Pyramid Prism

摘要

为了提高分幅相机的像面一致性, 从分孔径和分振幅两种分幅方法的原理出发, 分析了物体辐射特性影响像面一致性的原因.基于光纤传像器件匀光作用, 提出了一种提高像面一致性的方法, 并以棱锥分孔径实现六分幅为例, 在LightTools软件中仿真了光纤面板厚度、纤芯直径、光线入射角度等参量对像面一致性的影响.结果表明, 当光束主光线在光纤前端的入射角在±15°内变化时, 增大光纤面板厚度或减小纤芯直径, 可使得六幅像面能量差小于0.3%.基于光纤传像器件的棱锥分幅结构, 可有效提高分幅相机的像面一致性.

Abstract

In order to improve the image consistency, the factors influencing the image consistency was analyzed according to the principle of aperture-divided and amplitude divided method. In addition, one approach for improving the image consistency based on the fiber optics imaging was presented. Taking the six-frame divided by the pyramid as an example, the influences of the thickness, core diameter of fiber face plate and incident angle on image consistency were simulated by Lighttools. The results show that energy difference of the six image planes could be less than 0.3% with increasing of the thickness or decreasing of the core diameter of the fiber, when the incident angle ranges from 15 ° to －15 °.Based on the fiber optics imaging, the optical frame-divided structure by the pyramid can effectively improve the image consistency of framing camera.

参考文献

[1] 江孝国, 王远, 金光, 等. 超高速高性能门控型三分幅相机［J］. 光子学报, 2013, 42(9)：1065-1070.

JIANG Xiao-guo, WANG Yuan, JIN Guang, et al. Three-frame framing camera with ultrahigh speed and high performance［J］. Acta Photonica Sinca, 2013, 42(9)：1065-1070.

[2] 李景镇. 迈向原子时间分辨的时间放大技术［J］.中国科学E辑: 技术科学, 2009, 39(12): 1887-1904

LI Jing-zhen. Time amplifying techniques towards atomic time resolution［J］. Science China Technological Sciences, 2009, 39(12): 1887-1904.

[3] 杨立云,许鹏,高祥涛,等.数字激光光速摄影系统及其在爆炸光测力学实验中的应用［J］.科技导报, 2014,32(32)：17-32.

YANG Li-yun, XU Peng, GAO Xiang-tao, et al. Digital laser high-speed photography system and its application in photomechanical tests with blast loading［J］. Science & Technology Review, 2014, 32(32)：17-21.

[4] 李剑,刘宁文,肖正飞,等. 可用于多幅纹影照相的超高速光电分幅相机光学系统设计［J］. 光电工程,2014,41(10): 38-41.

LI Jian, LIU Ning-wen, XIAO Zheng-fei, et al. Optical system design of ultra high speed optic electronic framing camera used in shlieren experiment［J］. Opto-Electronic Engineering, 2014, 41(10): 38-41.

[5] PENDLEY G J. High speed imaging technology: yesterday,today,& tomorrow［C］. SPIE, 2003, 4948: 110-113.

[6] 彭小勋, 叶玉堂, 吴云峰, 等.数字高速分幅相机中光学分幅系统的设计与分析［J］.光学与光电技术, 2008,6(1): 52-54.

PENG Xiao-xun, YE Yu-tang, WU Yun-feng, et al. Design and analysis of optical splitting system for digital high-speed multi-frame gated camera［J］.Optics&Optoelectronic Technology, 2008, 6(1): 52-54.

[7] HONOUR J. A high-resolution sixteen frame ultra fast digital imaging system［C］. SPIE, 2000, 3968: 4-9.

[8] XING Lina, XIE Peng. Design and analysis of supporting structure of cubic prism for there-frame in high-speed multi-frame camera［C］. SPIE, 2012, 84201D1-84201D6.

[9] 谢洪波, 祝世民, 龚艳霞, 等.应用于数字高速成像的离轴光学系统设计［J］.应用光学, 2015,36(2)：194-198.

XIE Hong-bo, ZHU Shi-min, GONG Yan-xia, et al. The design of off-axis optical system applied for digital high-speed imaging［J］. Journal of Applied Optics, 2015, 36(2): 194-198.

[10] 谢洪波, 徐萌萌, 龚艳霞, 等.宽光谱超高速八分幅相机的光学系统设计［J］.应用光学, 2016,37(2)：172-176.

XIE Hong-bo, XU Meng-meng, GONG Yan-xia, et al. Optical system design of wide-spectrum and ultra high-speed 8-frame camera［J］. Journal of Applied Optics, 2016, 37(2): 172-176.

[11] FISCHER R E. Optical system design 2nd［M］. New York: McGraw-Hill,2008.

[12] 史金辉, 王政平.消偏振分光棱镜的设计与性能分析［J］.哈尔滨工程大学学报.2008,29(9): 1019-1022.

SHI Jin-hui, WANG Zheng-ping. Design and characteristics analysis of non-polarizing beam splitters［J］. Journal of Harbin Engineering University, 2008, 29(9): 1019-1022.

[13] 孔德鹏, 王丽莉.传像光纤、光纤面板及光锥制造新方法探索［J］.光子学报, 2009,38(11)：2913-2916.

KONG De-peng, WANG Li-li. A new approach for fabricating imaging fiber, optic fiber plates and taper［J］. Acta Photonica Sinica,2009, 38(11): 2913-2916.

[14] 张敬贤, 高稚允, 胡士凌, 等.SKC-1型光纤面板数值孔径测试仪［J］.仪器仪表学报, 1988,09(3)：316-322.

[15] 潘俊杰, 赵宝升, 赛小锋.影响X射线像增强器分辨率的因素分析［J］.光子学报, 2008,37(6)：1116-1118.

PAN Jun-jie, ZHAO Bao-sheng, SAN Xiao-feng et al. Analysis on influencing fantors of resolution of X-ray image intensifier［J］. Acta Photonica Sinca, 2008, 37(6): 1116-1118.

谢洪波, 方春伦, 杨磊, 江敏, 孟庆斌, 毛晨盛. 分幅相机像面一致性分析及分幅方法改进[J]. 光子学报, 2017, 46(4): 0411002. XIE Hong-bo, FANG Chun-lun, YANG Lei, JIANG Min, MENG Qing-bin, MAO Chen-sheng. Analysis of Image Consistency for Framing Camera and Improvement of Framing Method[J]. ACTA PHOTONICA SINICA, 2017, 46(4): 0411002.

分幅相机像面一致性分析及分幅方法改进

关于本站 Cookie 的使用提示

全站搜索

分幅相机像面一致性分析及分幅方法改进

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索