聚丙烯酸酯泡沫密度均匀性控制
[1] Kim K,Mok L,Erlenborn M J. Noncontact thermal gradient method for fabrication of uniform cryogenic interial fusion target[J].J Vac Sci Technol,1985,A3(3):1196-1200.
[2] Takagi M,Ishihara M,Norimatsu T. Development of foam shell with plastic ablator for cryogenic laser fusion target[J].J Vac Sci Technol,1993,A11(5):2837-2845.
[5] Antolak A J,Demiris A,Derzon M S,et al. Fabrication and characterization of Z-pinch foam targets[J].Rev Sci Instrum,1997,68(1):858-861.
[6] Antolak A J,Morse D H,Hebron D E,et al. Characterizing the uniformity of polystyrene and TPX Z-pinch fusion targets by nuclear microscopy[J].Fusion Engineering and Design,1999,46(1): 37-45.
[7] 单雯雯,张林,徐嘉靖,等. 靶用低密度TPX泡沫的制备与表征[J]. 强激光与粒子束,2008,20(12):13-16.(Shan Wenwen,Zhang Lin,Xu Jiajing,et al.Density modified preparation and characterization on TPX foams.High Power Laser and Particle Beams,2008,20(12):13-16)
单雯雯, 袁保和, 徐家云, 张林, 王燕红. 聚丙烯酸酯泡沫密度均匀性控制[J]. 强激光与粒子束, 2010, 22(2): 307. Shan Wenwen, Yuan Baohe, Xu Jiayun, Zhang Lin, Wang Yanhong. Controlling of density uniformity of polyacrylate foams[J]. High Power Laser and Particle Beams, 2010, 22(2): 307.