[1] PIRROTTA S, SINATRA R, MESCHINI A. Evaluation of the effect of preload force on resonance frequencies for a traveling wave ultrasonic motor［J］. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2006, 53(4): 746-753.

    PIRROTTA S, SINATRA R, MESCHINI A. Evaluation of the effect of preload force on resonance frequencies for a traveling wave ultrasonic motor［J］. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2006, 53(4): 746-753.

[2] OH J H, YUK H S, LIM J N, et al.. An analysis of the resonance characteristics of a traveling wave type ultrasonic motor by applying a normal force and input voltage［J］. Ferroelectrics, 2009, 378(1): 135-143.

    OH J H, YUK H S, LIM J N, et al.. An analysis of the resonance characteristics of a traveling wave type ultrasonic motor by applying a normal force and input voltage［J］. Ferroelectrics, 2009, 378(1): 135-143.

[3] LI J B, LIU S, QU J J, et al.. A contact model of traveling-wave ultrasonic motors considering preload and load torque effects［J］. International Journal of Applied Electromagnetics and Mechanics, 2017, 56(2): 151-164.

    LI J B, LIU S, QU J J, et al.. A contact model of traveling-wave ultrasonic motors considering preload and load torque effects［J］. International Journal of Applied Electromagnetics and Mechanics, 2017, 56(2): 151-164.

[4] CHEN CH, ZHAO CH SH. A novel semi-analytical model of the stator of TRUM based on dynamic substructure method［C］. USE2005. Tokyo, Japan, November 17-25,2005: 17-25.

    CHEN CH, ZHAO CH SH. A novel semi-analytical model of the stator of TRUM based on dynamic substructure method［C］. USE2005. Tokyo, Japan, November 17-25,2005: 17-25.

[5] CHEN CH, ZHAO CH SH. Dynamics of piezoelectric ultrasonic motor based on substructural theoretic method［J］. IEEE International Conference on Robotics and Biomimetics. IEEE, 2006: 344-339.

    CHEN CH, ZHAO CH SH. Dynamics of piezoelectric ultrasonic motor based on substructural theoretic method［J］. IEEE International Conference on Robotics and Biomimetics. IEEE, 2006: 344-339.

[6] BULLO M, PERRIARD Y. Influences to the mechanical performances of the travelling wave ultrasonic motor by varying the prestressing force between stator and rotor［C］. IEEE Symposium on Ultrasonics, 2003, 5-8 Oct. 2003, Honolulu, HI, USA, 2003: 593-596.

    BULLO M, PERRIARD Y. Influences to the mechanical performances of the travelling wave ultrasonic motor by varying the prestressing force between stator and rotor［C］. IEEE Symposium on Ultrasonics, 2003, 5-8 Oct. 2003, Honolulu, HI, USA, 2003: 593-596.

[7] 曾劲松, 罗文华, 李金新. 预压力对超声电机输出性能的影响［C］. 2010全国压电和声波理论及器件技术研讨会, 中国福建厦门, 2010.

    曾劲松, 罗文华, 李金新. 预压力对超声电机输出性能的影响［C］. 2010全国压电和声波理论及器件技术研讨会, 中国福建厦门, 2010.

    ZENG J S, LUO W H, LI J X. Effects of preload force on ultrasonic motor output performance［C］. Proceedings of the 2010 Symposium on Piezoelectricity,Acoustic Waves and Device Applications, xiamen, fujian, China, 2010. (in Chinese).

    ZENG J S, LUO W H, LI J X. Effects of preload force on ultrasonic motor output performance［C］. Proceedings of the 2010 Symposium on Piezoelectricity,Acoustic Waves and Device Applications, xiamen, fujian, China, 2010. (in Chinese).

[8] 王光庆. 预压力对超声波电动机性能影响的实验研究［J］. 微特电机, 2008,36(6): 4-6, 12.

    王光庆. 预压力对超声波电动机性能影响的实验研究［J］. 微特电机, 2008,36(6): 4-6, 12.

    WANG G Q. Effects of the preload on the characteristics of ultrasonic motor［J］. Small & Special Electrical Machines, 2008, 36(6): 4-6, 12.(in Chinese)

    WANG G Q. Effects of the preload on the characteristics of ultrasonic motor［J］. Small & Special Electrical Machines, 2008, 36(6): 4-6, 12.(in Chinese)

[9] 赵向东, 赵淳生. 预压力对超声电机输出特性影响的实验研究［J］. 力学与实践, 2002, 24(4): 46-48.

    赵向东, 赵淳生. 预压力对超声电机输出特性影响的实验研究［J］. 力学与实践, 2002, 24(4): 46-48.

    ZHAO X D, ZHAO CH SH. Effects of preload on the output characteristics of ultrasonic motors［J］. Mechanics and Engineering, 2002, 24(4): 46-48.(in Chinese)

    ZHAO X D, ZHAO CH SH. Effects of preload on the output characteristics of ultrasonic motors［J］. Mechanics and Engineering, 2002, 24(4): 46-48.(in Chinese)

[10] 张彦虎, 曲建俊, 郭文峰, 等. 预压力对超声电机输出性能影响的模拟分析［C］. 第五届全国振动利用工程学术会议暨第四次全国超声电机技术研讨会, 南京, 2012.

    张彦虎, 曲建俊, 郭文峰, 等. 预压力对超声电机输出性能影响的模拟分析［C］. 第五届全国振动利用工程学术会议暨第四次全国超声电机技术研讨会, 南京, 2012.

    ZHANG Y H, QU J J, GUO W F, et al.. Simulation analysis of the influence of preload force on ultrasonic motor output performance［C］. The Fifth National Conference on Vibration Utilization Engineering and the Fourth National Symposium on Ultrasonic Motor Technology, Nanjing, 2012. (in Chinese)

    ZHANG Y H, QU J J, GUO W F, et al.. Simulation analysis of the influence of preload force on ultrasonic motor output performance［C］. The Fifth National Conference on Vibration Utilization Engineering and the Fourth National Symposium on Ultrasonic Motor Technology, Nanjing, 2012. (in Chinese)

[11] 韩庆庆, 黄卫清. 一种超声波电动机预压力的试验方法［C］. 第十届中国小电机技术研讨会, 中国上海, 2005: 202-204.

    韩庆庆, 黄卫清. 一种超声波电动机预压力的试验方法［C］. 第十届中国小电机技术研讨会, 中国上海, 2005: 202-204.

    HAN Q Q, HUANG W Q. A test method for preload force of ultrasonic motor［C］. The 10th China Symposium on Small Motor Technology, Shanghai, China, 2005: 202-204. (in Chinese).

    HAN Q Q, HUANG W Q. A test method for preload force of ultrasonic motor［C］. The 10th China Symposium on Small Motor Technology, Shanghai, China, 2005: 202-204. (in Chinese).

[12] 王贞艳, 贾高欣. 压电陶瓷作动器非对称迟滞建模与内模控制［J］. 光学 精密工程, 2018,26(10): 2484-2492.

    王贞艳, 贾高欣. 压电陶瓷作动器非对称迟滞建模与内模控制［J］. 光学 精密工程, 2018,26(10): 2484-2492.

    WANG ZH Y, JIA G X. Asymmetric hysteresis modeling and internal model control of piezoceramic actuators［J］. Opt. Precision Eng., 2018, 26(10): 2484-2492.(in Chinese)

    WANG ZH Y, JIA G X. Asymmetric hysteresis modeling and internal model control of piezoceramic actuators［J］. Opt. Precision Eng., 2018, 26(10): 2484-2492.(in Chinese)

[13] 张泉, 尹达一, 张茜丹. 压电执行器动态迟滞建模与LQG最优控制器设计［J］. 光学 精密工程, 2018,26(11): 2744-2753.

    张泉, 尹达一, 张茜丹. 压电执行器动态迟滞建模与LQG最优控制器设计［J］. 光学 精密工程, 2018,26(11): 2744-2753.

    ZHANG Q, YIN D Y, ZHANG X D. Dynamic hysteresis modeling and LQG optimal controller design of piezoelectric actuators［J］. Opt. Precision Eng., 2018, 26(11): 2744-2753.(in Chinese)

    ZHANG Q, YIN D Y, ZHANG X D. Dynamic hysteresis modeling and LQG optimal controller design of piezoelectric actuators［J］. Opt. Precision Eng., 2018, 26(11): 2744-2753.(in Chinese)

[14] TAVALLAEI M A, ATASHZAR S F, DRANGOVA M. Robust motion control of ultrasonic motors under temperature disturbance［J］. IEEE Transactions on Industrial Electronics, 2016, 63(4): 2360-2368.

    TAVALLAEI M A, ATASHZAR S F, DRANGOVA M. Robust motion control of ultrasonic motors under temperature disturbance［J］. IEEE Transactions on Industrial Electronics, 2016, 63(4): 2360-2368.

[15] YANO Y, IIDA K, SAKABE T, et al.. Approach to speed control using temperature characteristics of ultrasonic motor［C］. The 2004 47th Midwest Symposium on Circuits and Systems, 2004. MWSCAS '04., 25-28 July 2004, Hiroshima, Japan, 2004: iii-155.

    YANO Y, IIDA K, SAKABE T, et al.. Approach to speed control using temperature characteristics of ultrasonic motor［C］. The 2004 47th Midwest Symposium on Circuits and Systems, 2004. MWSCAS '04., 25-28 July 2004, Hiroshima, Japan, 2004: iii-155.

[16] 张帆. 行波型超声电机稳定性及其控制策略研究［D］. 重庆: 重庆大学, 2013.

    张帆. 行波型超声电机稳定性及其控制策略研究［D］. 重庆: 重庆大学, 2013.

    ZHANG F. Stability of the Traveling Wave Type Ultrasonic Motor and Control Strategy［D］. Chongqing: Chongqing University, 2013.(in Chinese)

    ZHANG F. Stability of the Traveling Wave Type Ultrasonic Motor and Control Strategy［D］. Chongqing: Chongqing University, 2013.(in Chinese)