[1] 林虎,Frank H(a)rtig,KarinKniel,等.基于便携式坐标测量机的大齿轮测量方法［J］.光学 精密工程,2013, 21(7): 1763-1770.

    LIN H, Frank H(a)rtig, Karin Kniel, et al..Measurement of large gears by using portable coordinate measuring machines ［J］. Opt.Precision Eng., 2013, 21(7): 1763-1770. (in Chinese)

[2] 程文涛, 于连栋, 费业泰. 一种关节式坐标测量机的建模及其标定［J］. 中国科学技术大学学报, 2011, 41(5): 439-444.

    CHENG W T,YU L D,FEI Y T. Kinematic model and calibration of an articulated arm coordinate measuring machine［J］. Journal of University of Science and Technology of China, 2011,41(5): 439-444. (in Chinese)

[3] 祝连庆, 李伟仙, 潘志康,等.变臂关节式坐标测量机的参数自标定方法研究［J］. 仪器仪表学报, 2014, 35(3): 572-579.

    ZHU L Q, LI W X, PAN ZH G, et al..Research on parameter self-calibration method for partly-bonded articulated arm coordinate measuring machine ［J］. Chinese Journal of Scientific Instrument, 2014,35(3): 572-579. (in Chinese)

[4] 于连栋, 鲁思颖, 张炜,等. 平行双关节坐标测量机连杆微变形测量系统［J］. 电子测量与仪器学报, 2015, 29(11): 1621-1629.

    YU L D,LU S Y,ZHANG W, et al.. Measuring system of micro-deformation of parallel double-joint coordinate measuring machine linkage［J］. Journal of Electronic Measurement and Instrumentation.,2015,29(11): 1621-1629.

[5] 胡毅,江超,黄炜,等. 用蚁群算法求解关节式坐标测量机的最佳测量区［J］. 光学 精密工程,2017,25(6): 1486-1493.

    HU Y, JIANG CH, HUANG W, et al..Optimal measurement area of articulated coordinate measuring machine calculated by ant colony algorithm［J］.Opt. Precision Eng.,2017,25(6): 1486-1493. (in Chinese)

[6] 高贯斌,王文,林铿,等. 圆光栅角度传感器的误差补偿及参数辨识［J］.光学 精密工程,2010,18(08): 1766-1772.

    GAO G B, WANG W, LIN K,et al..Error compensation and parameter identification of circular grating angle sensors［J］. Opt. Precision Eng., 2010,18(08): 1766-1772. (in Chinese)

[7] González-Madruga Daniel, Barreiro Joaquin, Cuesta Eduardo, et al.. AACMM performance test: influence of human factor and geometric features［J］. Procedia Engineering, 2014, 69: 442-448.

[8] CUESTA E, MANTARAS D A, LUQUE P, et al.. Dynamic deformations in coordinate measuring arms using virtual simulation［J］. International Journal of Simulation Modelling, 2015, 14(4): 609-620.

[9] VOGEL J, HADDADIN S, SIMERAL J D, et al.. Continuous control of the DLR Light-Weight Robot III by a human with tetraplegia using the BrainGate2 neural interface system［J］. Experimental Robotics, 2014: 125-136.

[10] SALISBURY K, TOWNSEND W, EBRMAN B, et al.. Preliminary design of a whole-arm manipulation system (WAMS)［J］. Proceedings 1988 IEEE International Conference on Robotics and Automation,1988,(1): 254-260.

[11] 熊根良. 具有柔性关节的轻型机械臂控制系统研究［D］. 哈尔滨工业大学, 2010.

    XION G L. Research on control of light weight robot with flexible joints［D］. Harbin Institute of Technology,2010.(in Chinese)

[12] 邾继贵, 邹剑, 林嘉睿,等. 面向测量的工业机器人定位误差补偿［J］. 光电子·激光, 2013(4): 746-750.

    ZHU J G,ZOU J,LIN J R,et al..Measurement-oriented positioning error compensation for industrial robot［J］. Journal of Optoelectronics·Laser, 2013(4): 746-750. (in Chinese)

[13] 杨守瑞, 尹仕斌, 任永杰,等. 机器人柔性视觉测量系统标定方法的改进［J］. 光学 精密工程, 2014, 22(12): 3239-3246.

    YANG SH R,YIN S B,REN Y J,et al..Improvement of calibration method for robotic flexible visual measurement systems［J］. Opt. Precision Eng.,2014,22(12): 3239-3246. (in Chinese)

[14] 招绍坤. 轻型机械臂模块化设计与运动控制的研究［D］. 哈尔滨工业大学, 2010.

    ZHAO SH K. Modular design and motion control for light robot arm［D］. Harbin Institute of Technology,2010.(in Chinese)