[1] 马超, 王存山. 镍包石墨对激光熔覆镍基合金涂层组织和性能的影响[J]. 中国激光, 2013, 40(8): 0803001.

    Ma Chao, Wang Cunshan. Influence of graphite/Ni on microstructure and properties of laser clad Ni-based alloy coatings[J]. Chinese J Lasers, 2013, 40(8): 0803001.

[2] 徐滨士, 谭俊, 陈建敏. 表面工程领域科学技术发展[J]. 中国表面工程, 2011, 24(2): 1-11.

    Xu Binshi, Tan Jun, Li Janmin. The development of the surface science technology[J]. China Surface Engineer, 2011, 24(2): 1-11.

[3] 石世宏, 王晨, 徐爱琴, 等. 基于环形光光内送粉激光熔覆温度场的数值模拟[J]. 中国激光, 2012, 39(3): 0303002.

    Shi Shihong, Wang Chen, Xu Aiqin, et al.. Temperature field numberical simulation of laser cladding based on internal power feeding through a hollow laser beam[J]. Chinese J Lasers, 2012, 39(3): 0303002.

[4] 皮政清. 调控激光熔覆层开裂行为的实验研究[D]. 衡阳: 南华大学, 2011.

    Pi Zhengqing. The Regulation Experimental Research of the Cracking Layer During Laser Cladding[D]. Hengyang: University of South China, 2011.

[5] 王慧萍. 关于激光熔覆层开裂问题的探讨[J]. 热处理, 2008, 23(6): 24-26.

    Wang Huiping. The researching on the clacking problem in the laser cladding[J]. Heating, 2008, 23(6): 24-26.

[6] 陈列, 谢沛霖. 双向扫描激光熔覆止裂机理及实验分析[J]. 焊接学报, 2011, 32(2): 65-68.

    Chen Lie, Xie Peilin. Research into helical gear tooth surface fabrication using a double scanning laser cladding method[J]. Transactions of the China Welding Institution, 2011, 32(2): 65-68.

[7] 宋光明, 吴钢, 黄婉娟. 单向送粉双向扫描激光熔覆工艺防止裂纹的试验研究[J]. 金属热处理, 2005, 30(6): 26-28.

    Song Guangming, Wu Gang, Huang Wanjuan. Cracking control in laser cladding process with unidirectional powder feeding and double scanning[J]. Heat Treatment of Metals, 2005, 30(6): 26-28.

[8] 张晓东, 董世运, 徐滨士, 等. D577铁基合金激光熔覆层组织及性能研究[J]. 光学学报, 2011, 31(s1): s100122.

    Zhang Xiaodong, Dong Shiyun, Xu Binshi, et al.. Microstructure and performance of D577 Fe-based alloy laser cladding coating[J]. Acta Optica Sinica, 2011, 31(s1): s100122.

[9] 沈燕娣. 激光熔覆工艺基础研究[D]. 上海: 上海海事大学, 2006.

    Shen Yandi. The Fundamental Investigation on Laser Cladding Process[D] Shanghai: Shanghai Maritime University, 2006.

[10] 杨宁, 李立凯. 激光熔覆层的开裂行为及其防止[J]. 材料热处理技术, 2011, 40(24): 150-152.

    Yang Ning, Li Likai. The clacking behavior and the prevent methods during the laser cladding[J]. Transactions of Material and Heat Treatment, 2011, 40(24): 150-152.

[11] 史秀梅, 袁书强, 依颖辉, 等. 激光熔覆层开裂影响因素的探讨研究[J]. 精密成形工程, 2012, 4(6): 114-117.

    Shi Xiumei, Yuan shuqiang, Yi Yinghui, et al.. Research the factors of the layer cracking during the laser cladding[J]. Precision Forming Engineering, 2012, 4(6): 114-117.

[12] 傅强, 金振俊, 汤军, 等. 齿轮轴激光熔覆轴变形的分析与控制[J]. 电焊机, 2012, 42(5): 27-31.

    Fu Qiang, Jin Zhenjun, Tang Jun, et al.. Analysis and controlling of deformation of gear shaft in laser cladding on teeth surfaces[J]. Electric Welding Machine, 2012, 42(5): 27-31.

[13] 陈列, 古成中, 谢沛霖. 斜齿轮轴齿面激光熔覆过程中温度场的数值分析[J]. 中国激光, 2011, 38(3): 0303006.

    Chen Lie, Gu Chengzhong, Xie Peilin. Numerical analysis of temperature field in laser cladding on tooth surface of helical gear shaft[J].Chinese J Lasers, 2011, 38(3): 0303006.