光学学报, 1997, 17 (8): 1021, 网络出版: 2006-10-31
制作具有预期位相调制度的卤化银乳胶位相型薄全息光栅的研究
A Study for Making a Thin Silver-Halide Phase Hologram with an Expectation Phase Modulation
摘要
提出了一种制作具有预期位相调制度的卤化银乳胶位相型薄全息光栅的方法。它通过分析所拍摄的第一张全息光栅的数据来获得最佳曝光参量,从而使继后的拍摄,在同样的实验条件下能获得所预期的位相调制度。文中给出了这方法的理论分析和某些应用。
Abstract
A new method for making a thin silver halide phase holographic grating with an expectation phase modulation is proposed. The optimum exposure parameter can be obtained by analysing the data of the holographic grating which was made at the first step. Then the subsequent thin phase holographic gratings with expectation phase modulation can be made under the same experimental conditions as in the first step. The theoretical analysis and some applications of this method are discussed.
参考文献
[1] H. M. 史密斯. 全息记录材料. 北京: 科学出版社, 1984
[2] 于美文 编著. 光学全息及信息处理. 北京: 国防出版社, 1984
[3] 熊秉衡,王正荣,张永安. 可获得高反衬度干涉条纹的实时全息记录方法. 光子学报, 1996, 25(8): 707~712
[4] Jenn-AnLin et al.. Quantitative three-beam Ronchi test. Appl. Opt., 1990, 29(13): 1912~1918
熊秉衡, 王正荣, 张永安, 佘灿麟. 制作具有预期位相调制度的卤化银乳胶位相型薄全息光栅的研究[J]. 光学学报, 1997, 17(8): 1021. 熊秉衡, 王正荣, 张永安, 佘灿麟. A Study for Making a Thin Silver-Halide Phase Hologram with an Expectation Phase Modulation[J]. Acta Optica Sinica, 1997, 17(8): 1021.