群时延时间法求解速调管输出腔的特性参数

以微波传输线理论和谐振腔等效电路理论为基础, 分别对速调管滤波器加载谐振腔输出回路的间隙阻抗实部和端口群时延公式进行了推导, 通过简化两公式的比值因子, 得到了利用端口群时延特性来分析输出腔间隙阻抗-频率特性的原理和方法。利用3维电磁计算软件CST分别对X波段和Ku波段两个滤波器加载输出回路进行模拟计算, 结果表明:群时延时间法与其他已有方法计算结果一致, 验证了此方法的正确性。基于模拟计算软件强大的后处理功能, 群时延时间法使速调管输出回路的计算步骤更加简捷直观。

Abstract

The gap impedance and the group delay time of the output cavity for a klystron loaded with a filter are deduced using the microwave transmission line theory and the equivalent circuit theory. A method that analyzes the gap impedance of the output cavity through its group delay time is proposed. Two typical examples of the output cavity at X band and Ku band are calculated by the software CST, and the calculated results are consistent with those evaluated by other methods. The proposed method is proved to be reasonable, with more simple calculation and more explicit outcome based on the powerful post-processing capability of the calculation software.

参考文献

[1] 丁耀根.大功率速调管的理论与计算模拟［M］.北京:国防工业出版社, 2008:68-70, 86.(Ding Yaogen. Theory and computer simulation of high power klystron. Beijing: National Defense Industry Press, 2008:68-70, 86)

[2] 丁耀根.大功率速调管的设计制造和应用［M］.北京:国防工业出版社, 2010:68-70, 86.(Ding Yaogen. Manufacture and application of high power klystron. Beijing: National Defense Industry Press, 2010:68-70, 86)

[3] 林福民.大功率速调管宽带多注速调管输出段的研究［D］.北京:中国科学院电子学研究所, 2003:33-38.(Lin Fumin. Research on the output section of high power broadband multi-beam klystron. Beijing: Institute of Electronics, Chinese Academy of Sciences, 2003:33-38)

[4] 李德儒.群时延测量技术［M］.北京:电子工业出版社, 1990:14-22.(Li Deru. Measuring technique of group delay. Beijing: Publishing House of Electronics Industry, 1990:14-22)

[5] Zhao Y X. An impedance measurement method for double-gap klystron cavity［J］. IEEE Trans on Electron Devices, 1982, 29(2):316-320.

[6] 马菁.三间隙耦合腔宽频带输出回路的研究［D］.北京:中国科学院电子学研究所, 2009:13-29.(Ma Jing. Research on the broadband output circuit of three-gap coupled cavity. Beijing: Institute of Electronics, Chinese Academy of Sciences, 2009:13-29)

[7] 王进华. 速调管输出回路计算方法的研究［D］.北京:中国科学院电子学研究所, 2006:24-86.(Wang Jinghua. Research on calculation me thod of output circuit of klystron. Beijing: Institute of Electronics, Chinese Academy of Sciences, 2006:24-86)

[8] 林福民, 丁耀根, 张志强.速调管双间隙腔的间隙阻抗矩阵频率特性的模拟计算方法［J］.电子与信息学报, 2004, 26(9):1480-1486.(Lin Fumin, Ding Yaogen, Zhang Zhiqiang. Simulation and calculation of gap impedance of two-gap coupling cavity of klystron. Journal of Electronics and Information Technology, 2004, 26(9):1480-1486)

[9] 林福民, 王志勇, 黄焕辉.反射系数相位法计算谐振腔外观品质因数的局限性［J］.强激光与粒子束, 2005, 17(9):1399-1404.(Lin Fumin, Wang Zhiyong, Huang Huanhui. Limitation of Qext calculation method based on reflectance phase. High Power Laser and Particle Beams, 2005, 17(9):1399-1404)

[10] 张丁, 曹静.群时延时间法求解速调管输出腔的外观品质因数［J］.真空科学与技术学报, 2007, 27(5):391-394.(Zhang Ding, Cao Jing. Calculation of external-quality factor of output cavity of klystron with group delay time method. Chinese Journal of Vacuum Science and Technology, 2007, 27(5):391-394)

[11] 张敏.CST用户全书［M］.成都:电子科技大学出版社, 2005:1-3.(Zhang Min. CST help manual. Chengdu: University of Electronic Science and Technology of China Press, 2005:1-3)

谢兴娟, 丁耀根, 刘濮鲲, 黄传禄, 董玉和. 群时延时间法求解速调管输出腔的特性参数[J]. 强激光与粒子束, 2012, 24(1): 152. Xie Xingjuan, Ding Yaogen, Liu Pukun, Huang Chuanlu, Dong Yuhe. Characteristic parameter calculation for output cavity of klystron with group delay time method[J]. High Power Laser and Particle Beams, 2012, 24(1): 152.

群时延时间法求解速调管输出腔的特性参数

关于本站 Cookie 的使用提示

全站搜索

群时延时间法求解速调管输出腔的特性参数

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索