应用光学, 2018, 39 (6): 791, 网络出版: 2019-01-10   

椭球面反射镜的光轴引出方法

Optical axis elicitation method for ellipsoidal mirror
作者单位
1 中国航天系统科学与工程研究院, 北京 100090
2 北京空间机电研究所, 北京 100076
摘要
椭球面镜作为反射式镜头主镜的常用类型, 准确、便利地引出其光轴, 在镜头装调过程中是必不可少的。传统的光轴引出方法主要依靠三坐标仪进行测量, 由于其角度拟合精度低、接触式测量和尺寸限制等缺陷, 已经无法满足现下的大口径光学镜头装调需求, 为此, 提出一种新型椭球面主镜光轴引出方法, 该方法通过设计一个平面球差补偿器, 搭建出椭球面镜的无相差面型检测光路, 将椭球面镜的光轴转换为补偿器的法线, 再使用经纬仪测量法线与结构基准间的角度关系, 间接地引出主镜光轴, 光轴引出精度可达1.4″。相较于传统的光轴引出方法, 该方法具有更高的角度测量精度、非接触、无尺寸限制等优点, 适用范围更广。
Abstract
The ellipsoid is the most common type of primary mirror for the reflective lens. And it is necessary to accurately and conveniently elicit the primary mirrors optical axis in the process of lens alignment, which used as the reference axis of the whole optical system. The traditional optical axis extraction methods mainly rely on a three-coordinate instrument to perform measurement. Due to its low angle fitting precision, contact measurement, and aperture limitation, the conventional optical axis system can no longer meet the requirements of the current large-aperture optical system. To this end, a novel ellipsoidal main mirror optical axis extraction method was proposed. By designing a plane spherical aberration compensator, the non-phase difference surface detection optical path of the ellipsoidal mirror was constructed, and the optical axis of the ellipsoidal mirror was converted into the normal line of compensator, and then the theodolite was used to measure the angular relationship between the normal line and the structural reference, and the main mirror optical axis was elicited indirectly.Results show the optical axis extraction accuracy can reach 1.4″.Compared with traditional optical axis extraction methods, the method has the advantages of higher angular measurement accuracy, non-contact, no size and wider application range,etc.
参考文献

[1] 龙夫年, 郭秀梅, 刘剑峰.利用ZYGO干涉仪进行非球面检测技术研究[J].哈尔滨工业大学学报, 2005,37(2): 231-233.

    LONG Funian,GUO Xiumei,LIU Jianfeng. Technical study for testing of aspheres by using ZYGO interferometer[J].Journal of Harbin Institute of Technology, 2005,37(2): 231-233.

[2] 栗孟娟, 廖志波, 王春雨. 小口径高精度折射式光学系统装调公差的分析与控制[J]. 应用光学, 2015, 36(2): 277-281.

    LI Mengjuan, LIAO Zhibo, WANG Chunyu. Analysis and control on assemblage tolerance in small-aperture high-precision refraction optical system[J].Journal of Applied Optics, 2015, 36(2): 277-281.

[3] 安连生.应用光学[M].北京: 北京理工大学出版社, 2003: 166-169.

    AN Liansheng.Applied optics[M].Beijing: Beijing Institute of Technology, 2003: 166-169.

[4] YOXALL B E, WALMSLEY R, KUO H P, et al. Two-axis MEMS lens alignment system for free-space optical interconnect[J]. IEEE Journal of Selected Topics in Quantum Electronics, 2011, 17(3): 559-565.

[5] 王孝坤, 王丽辉, 张学军. 干涉法实时测量浅度非球面技术[J]. 光学精密工程, 2008,16(2): 184-189.

    WANG Xiaokun, WANG Lihui, ZHANG Xuejun. Testing of weak aspheric surface by real-time interferometry[J].Optics and Precision Engineering, 2008,16(2): 184-189..

[6] 侯茂盛. 大口径非球面表面形状测量关键技术研究[D]. 北京: 北京理工大学, 2015.

    HOU Maosheng. Study on key techniques of profile measurement for large aperture optical aspherics[D]. Beijing: Beijing Institute of Technology,2015.

[7] 唐健冠, 伍凡, 吴时彬. 大口径非球面精磨表面形状检测技术研究[J]. 光学技术, 2001, 27(6): 509-511.

    TANG Jianguan, WU Fan, WU Shibin. Research on testing techniques for larger aperture aspherical surface in the fine grinding stage[J]. Optical Technique, 2001, 27(6): 509-511.

[8] BORN M E.光学原理[M].杨葭荪,译.北京: 电子工业出版社, 2005: 240-241.

    BORN M E. Principles of optics[M]. Translated by YANG Jiasun. Beijing: Publishing House of Electronics Industry, 2005: 240-241.

[9] 岳丽清, 张继友. 三线阵相机视轴夹角及线阵平行性装调测试[J].航天返回与遥感, 2012,33(3): 35-40.

    YUE Liqing,ZHANG Jiyou. Alignment method of axis angle and linear array parallelism for three-line array mapping camera[J]. Spacecraft Recovery and Remote Sensing, 2012,33(3): 35-40.

[10] 张向明, 姜峰, 孔龙阳,等. 卡塞格林系统光学装调技术研究[J]. 应用光学, 2015, 36(4): 526-530.

    ZHANG Xiangming, JIANG Feng, KONG Longyang, et al. Research on optical alignment technology for Cassegrain system[J]. Journal of Applied Optics,2015, 36(4): 526-530.

李斌, 陈佳夷, 王海超, 陈宗, 范龙飞, 霍腾飞. 椭球面反射镜的光轴引出方法[J]. 应用光学, 2018, 39(6): 791. Li Bin, Chen Jiayi, Wang Haichao, Chen Zong, Fan Longfei, Huo Tengfei. Optical axis elicitation method for ellipsoidal mirror[J]. Journal of Applied Optics, 2018, 39(6): 791.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!