[1] AHN H S, CHEN Y Q. State-dependent friction force compensation using periodic adaptive learning control ［J］. Mechatronics, 2009, 19 (6): 896-904.

[2] ASTROM K J, CANUDAS-DE-WIT C. Revisiting the LuGre friction model stick-slip motion and rate dependence［J］. IEEE Control Systems Magazine, 2008, 28(6): 101-114.

[3] PENNESTR E, ROSSI V, SALVINI P, et al.. Review and comparison of dry friction force models［J］. Nonlinear Dynamics, 2015, 83(4): 1785-1801.

[4] 王延忠, 郭超, 贾树王, 等. 基于Stribeck摩擦模型的盘式摩擦副稳定性分析［J］.中国机械工程, 2017, 28(21): 2521-2525.

    WANG Y ZH, GUO CH, JIA SH W, et al.. Stability analysis of disc friction pairs based on Stribeck model ［J］. China Mechanical Engineering, 2017, 28(21): 2521-2525. (in Chinese)

[5] CONG S, DENG K, SHANG W, et al.. Isolation control for inertially stabilized platform based on nonlinear friction compensation［J］. Nonlinear Dynamics, 2015, 84(3): 1123-1133.

[6] 陈浩, 孟健, 安琦. 直线电机滑台摩擦特性和摩擦模型［J］.华东理工大学学报: 自然科学版,2017, 43(4): 571-577.

    CHEN H, MENG J, AN Q. Friction characterization and friction model of a linear-moter rolling-guide stage ［J］. Journal of East China University of Science and Technology: Natural Science Edition, 2017, 43(4): 571-577. (in Chinese)

[7] KATO H. Characteristic analysis on an extended dahl model for planar two-dimensional motion［J］. Journal of the Japan Society for Precision Engineering, 2017, 83(6): 607-612.

[8] 于伟, 马佳光, 李锦英, 等. 基于LuGre模型实现精密伺服转台摩擦参数辨识及补偿［J］.光学 精密工程, 2011, 19(11): 2736-2743.

    YU W, MA J G, LI J Y, et al.. Friction parameter identification and friction compensation for precision servo turning table ［J］. Opt. Precision Eng., 2011, 19(11): 2736-2743. (in Chinese)

[9] 晋超琼, 张葆, 李贤涛, 等. 基于LuGre模型的航空光电稳定平台的摩擦力矩补偿［J］. 科学技术与工程, 2016, 16(30): 103-107.

    JIN CH Q, ZHANG B, LI X T, et al.. Friction compensation of aerial photoelectrical stabilized platform based on the LuGre model ［J］.Science Technology and Engineering, 2016, 16(30): 103-107. (in Chinese)

[10] 郭鹏飞, 邓永停, 王帅, 等.基于摩擦模型的反演滑模控制在大型望远镜上的应用［J］. 光学 精密工程, 2017, 25(10): 2620-2626.

    GUO P F,DENG Y T, WANG SH, et al..Backstepping sliding mode control of large telescope based on friction model ［J］. Opt. Precision Eng., 2017, 25(10): 2620-2626. (in Chinese)

[11] YEH S S, SU H C. Development of friction identification methods for feed drives of CNC machine tools［J］. The International Journal of Advanced Manufacturing Technology, 2010, 52(1): 263-278.

[12] 姜振海, 徐思晨, 谷东伟, 等.基于区间分析理论的摩擦补偿研究［J］.光学 精密工程, 2017, 25(6): 1519-1525.

    JIANG ZH H, XU S CH, GU D W, et al..Research on friction compensation based on interval analysis ［J］. Opt. Precision Eng., 2017, 25(6): 1519-1525. (in Chinese)

[13] 曾德林, 肖凯, 林竹翀,等.航空遥感惯性稳定平台LuGre摩擦参数的分步辨识［J］.光学 精密工程, 2016, 24(5): 1148-1158.

    ZENG D L, XIAO K, LIN ZH CH, et al.. Sub-step identification of LuGre friction parameters of inertially stabilized platform for airborne remote sensing ［J］. Opt. Precision Eng., 2016, 24(5): 1148-1158. (in Chinese)