[1] 杨洗陈,李会山,王云山 等. 用于重大装备修复的激光再制造技术[J]. 激光与光电子学进展,2003,40(10):53-57

    Yang Xichen,Li Huishan,Wang Yunshan et al.. Laser refabricating technology for repairing expensive and important equipments [J]. Laser & Optoelectronics Progress,2003,40(10):53-57

[2] 胡芳友,回丽,易德先 等. 飞机损伤的激光抢修技术[J]. 中国激光,2009,36(9):2245-2250

    Hu Fangyou,Hui Li,Yi Dexian et al.. Laser repair of aircraft battle damage [J]. Chinese J. Lasers,2009,36(9):2245-2250

[3] J. Lin,W. M. Steen. Powder flow and catchment during coaxial laser cladding [C]. SPIE,1997,3097:517-528

[4] . . An analysis of the shielding gas flow from a coaxial conical nozzle during high power CO2 laser welding[J]. J. Phys. D:Appl. Phys., 2006, 39(3): 563-574.

[5] 靳晓曙,杨洗陈,王云山 等. 激光三维直接制造和再制造新型同轴送粉喷嘴的研究[J]. 应用激光,2008,28(4):266-270

    Jin Xiaoshu,Yang Xichen,Wang Yunshan et al.. Research on the coaxial powder feeder nozzle in 3D direct manufacturing and re-manufacturing [J]. Applied Laser,2008,28(4):266-270

[6] 杨洗陈. 激光制造中同轴粉末流动量和质量传输[J]. 中国激光,2008,35(11):1664-1679

    Yang Xichen. Momentum and mass transferences of coaxial powder stream in laser manufacturing [J]. Chinese J. Lasers,2008,35(11):1664-1679

[7] 杨洗陈,雷剑波,刘运武 等. 激光制造中金属粉末流浓度场的检测[J]. 中国激光,2006,33(7):993-997

    Yang Xichen,Lei Jianbo,Liu Yunwu et al.. Experimental measurement of metal powder stream concentration field in laser manufacturing [J]. Chinese J. Lasers,2006,33(7):993-997

[8] 杨楠,杨洗陈. 激光熔覆中粉嘴流场的数值模拟[J]. 中国激光,2008,35(3):452-455

    Yang Nan,Yang Xichen. Numerical simulation of flow field of nozzle in laser cladding [J]. Chinese J. Lasers,2008,35(3):452-455

[9] . 激光制造中载气式同轴送粉粉末流场的数值模拟[J]. 机械工程学报, 2007, 43(5): 161-166.

    . . Numerical simulation of coaxial powder flow with carrying gas in laser manufacturing[J]. Chinese Journal of Mechanical Engineering, 2007, 43(5): 161-166.

[10] 李会山,王春娴,付继成 等. 同轴载气送粉激光熔覆粉末流参数研究[J]. 应用激光,2006,26(4):223-226

    Li Huishan,Wang Chunxian,Fu Jicheng et al.. Research on the coaxial carrier-gas powder feed laser cladding [J]. Applied Laser,2006,26(4):223-226

[11] Jehnming Lin. Numerical simulation of the focused powder streams in coaxial laser cladding [J]. Journal of Materials Processing Technology,2000,105(1-2):17-23

[12] . Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling[J]. Journal of Manufacturing Science and Engineering, 2004, 126(1): 33-41.

[13] . Numerical simulation of metallic powder flow in a coaxial nozzle for the laser aided deposition process[J]. Journal of Materials Processing Technology, 2005, 168(2): 230-244.

[14] . 激光焊接保护气体流态的纹影法研究[J]. 焊接技术, 2007, 36(2): 8-11.

    . The study of laser welding shielded gas by schlieren[J]. Welding Technology, 2007, 36(2): 8-11.

[15] . 应用PIV技术研究“零质量”射流的非定常流场特性[J]. 实验流体力学, 2005, 19(1): 83-86.

    . Investigation on the characteristics and structures of unsteady flow field near the zero-mass flux jet with PIV[J]. Journal of Experiments in Fluid Mechanics, 2005, 19(1): 83-86.

[16] 王福军. 计算流体动力学分析--CFD软件原理与应用[M]. 北京:清华大学出版社,2004. 124-125

    Wang Fujun. Computational Fluid Dynamics Analysis--CFD Software Principle and Application [M]. Beijing:Tsinghua University Press,2004. 124-125