铁基合金粉末的激光熔覆性能实验研究
[1] Puja Kadolkar,Narendra B.Dahotre.Variation of structure with input energy during laser surface engineering of ceramic coatings on aluminum alloys[J].Applied Surface Science,2002,199(1):222-233
[2] Keisuke Uenish,Kojiro F.Kobayashi.Formation of surface layer based on Al3Ti on aluminum by laser cladding and its compatibility with ceramics[J].Intermetallics,1999,7(4):553-559
[3] J.M.Yellup.Laser cladding using the powder blowing technique[J].Surface and Coatings Technology,1995 Vol.71(2),121-128
[4] P.Wu,C.Z.Zhou,X.N.Tang.Laser alloying of gradient metal-ceramic layer to enhance wear properties[J].Surface and Coating Technology,1995,73(5):111-114
[5] 钟敏霖,刘文今.Stellite和NiCrSiB合金激光送粉熔覆裂纹倾向的比较研究[J].中国激光,2002,29(11):1044-1049 Zhong Min-lin,Liu Wen-jin Comparative Research on Cracking Tendency in Powder Feeding Laser Cladding Stellite and NiCrSiB Alloys[J],Chinese Journal of Lasers,2002,29(11):1044-1049
毛怀东, 张大卫. 铁基合金粉末的激光熔覆性能实验研究[J]. 应用激光, 2007, 27(4): 273. 毛怀东, 张大卫. The Capability Study of Fe-alloy Powder Laser Cladding[J]. APPLIED LASER, 2007, 27(4): 273.