[1] 刘娟波. 高端塑料模具钢S136表面CMP精细加工工艺研究［D］. 北京: 华北电力大学, 2015.

    Liu J B. Investigation on surface CMP ultra-smooth process technology of advanced plastic mould steel S136［D］. Beijing: North China Electric Power University, 2015.

[2] Shiou F J, Chen C H. Freeform surface finish of plastic injection mold by using ball-burnishing process［J］. Journal of Materials Processing Technology, 2003, 140(1/2/3): 248-254.

[3] 张钱斌, 周添红. 汽车发动机冷却液中AZ91D镁合金的腐蚀行为［J］. 材料保护, 2015, 48(7): 55-57.

    Zhang Q B, Zhou T H. Corrosion behavior of AZ91D magnesium alloy in automotive engine coolant［J］. Materials Protection, 2015,48(7): 55-57.

[4] 胡建朋, 刘智勇, 胡山山, 等. 304不锈钢在模拟深海和浅海环境中的应力腐蚀行为［J］. 表面技术, 2015, 44(3): 9-14.

    Hu J P, Liu Z Y, Hu S S, et al. Stress corrosion behavior of 304 stainless steel in simulated deep and shallow seawater environments［J］. Surface Technology, 2015, 44(3): 9-14.

[5] Ueda M, Takabe H. The formation behavior of corrosion protective films of low Cr bearing steels in CO2 environments［J］. Annals of Surgery, 2001, 244(5): 700-705.

[6] Xu L N, Wang B, Zhu J Y, et al. Effect of Cr content on the corrosion performance of low-Cr alloy steel in a CO2 environment［J］. Applied Surface Science, 2016, 379: 39-46.

[7] 张林祥, 罗丰华, 李国平, 等. 预扩散处理Cr-Fe粉对铁基合金组织与性能的影响［J］. 粉末冶金技术, 2013, 31(2): 101-107.

    Zhang L X, Luo F H, Li G P, et al. Influence of pre-diffusion treatment of Cr-Fe powders on the microstructure and properties of iron-based alloys［J］. Powder Metallurgy Technology, 2013, 31(2): 101-107.

[8] 陈华, 张志金, 郭美娜, 等. 铬对FeNiMo系粉末冶金烧结性能的影响［J］. 金属热处理, 2006(s1): 91-94.

    Chen H, Zhang Z J, Guo M N, et al. Influence of chromium on sintering properties of FeNiMo system powder metallurgy［J］. Heat Treatment of Metals, 2006(s1): 91-94.

[9] 时凯华, 周科朝, 李志友, 等. 铬的添加量对WC-9Ni硬质合金微观结构与性能的影响［J］. 稀有金属材料与工程, 2016, 45(12): 3149-3154.

    Shi K H, Zhou K C, Li Z Y, et al. Effect of additive amount of Cr on microstructure and properties of WC-9Ni cemented carbides［J］. Rare Metal Materials and Engineering, 2016, 45(12): 3149-3154.

[10] Lewenhagen J. Chromium steel powders for components［J］. Materials Science Forum, 2003, 416/417/418(1): 241-246.

[11] 周鑫, 刘伟. 纯钨单层铺粉激光选区熔化/凝固行为［J］. 中国激光, 2016, 43(5): 0503006.

    Zhou X, Liu W. Melting and solidifying behavior in single layer selective laser of pure tungsten powder［J］. Chinese Journal of Lasers, 2016,43(5): 0503006.

[12] 张国庆, 杨永强, 张自勉, 等. 激光选区熔化成型零件支撑结构优化设计［J］. 中国激光, 2016,43(12): 1202002.

    Zhang G Q, Yang Y Q, Zhang Z M, et al. Optimal design of support structures in selective laser melting of parts［J］. Chinese Journal of Lasers, 2016, 43(12): 1202002.

[13] 林辉, 杨永强, 张国庆, 等. 激光选区熔化医用钴铬钼合金的摩擦性能［J］. 光学学报, 2016, 36(11): 1114003.

    Lin H, Yang Y Q, Zhang G Q, et al. Tribological performance of medical CoCrMo alloy fabricated by selective laser melting［J］. Acta Optica Sinica, 2016, 36(11): 1114003.

[14] 文世峰, 季宪泰, 周燕, 等. 激光选区熔化成形模具钢的发展现状及前景［J］. 激光与光电子学进展, 2018, 55(1): 011404.

    Wen S F, Ji X T, Zhou Y, et al. Development status and prospect of selective laser melting of mould steels［J］. Laser & Optoelectronics Progress, 2018, 55(1): 011404.

[15] 陈洪宇, 顾冬冬, 顾荣海, 等. 5CrNi4Mo模具钢选区激光熔化增材制造组织演变及力学性能研究［J］. 中国激光, 2016, 43(2): 0203003.

    Chen H Y, Gu D D, Gu R H, et al. Microstructure evolution and mechanical properties of 5CrNi4Mo die steel parts by selective laser melting additive manufacturing［J］. Chinese Journal of Lasers, 2016, 43(2): 0203003.

[16] 杨永强, 王迪, 吴伟辉. 金属零件选区激光熔化直接成型技术研究进展［J］. 中国激光, 2011, 38(6): 0601007.

    Yang Y Q, Wang D, Wu W H. Research progress of direct manufacturing of metal parts by selective laser melting［J］. Chinese Journal of Lasers, 2011, 38(6): 0601007.

[17] Horvath J, Uhlig H H. Critical potentials for pitting corrosion of Ni, Cr-Ni, Cr-Fe, and related stainless steels［J］. Journal of the Electrochemical Society, 1968,115(8): 791-795.

[18] Wang Q, Han C J, Choma T, et al. Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting［J］. Materials & Design, 2017, 126: 268-277.

[19] Hubbard C R, Snyder R L. RIR-measurement and use in quantitative XRD［J］. Powder Diffraction, 1988, 3(2): 74-77.

[20] 谭何灵, 周成, 刘希辉, 等. Cr对Q420钢在高盐度大气环境下耐蚀性的影响［J］. 中国腐蚀与防护学报, 2017, 37(3): 267-272.

    Tan H L, Zhou C, Liu X H, et al. Effect of Cr on corrosion resistance of Q420 steel in atmosphere with high salinity［J］. Journal of Chinese Society for Corrosion and Protection, 2017, 37(3): 267-272.