[1] K. Shima, K. Himeno et al.. Anoveltemperature-insensitive long-period fiber grating using a boron-codoped-germanosilicate-core fiber. OFC'97, 1997,FB2: 247～348

[2] D. D. Davis, T. K. Gaylord et al.. Long-period fiber grating fabrication with focused CO2 laser pulses. Electron. Lett., 1998, 34(3): 302～303

[3] Ashish M. Vengsargar. Long-period fiber gratings shape optical spectra. Laser Focus World, 1996, 32(6): 243～248

[4] T. Erdogan. Cladding-mode resonances in short-and long-period fiber grating filters. J. Opt. Soc. Am. A, 1997, 14(8): 1760～1773

[5] Ashish M. Vengsargar. Long-period fiber grating as band-rejection filters. IEEE J. L. T., 1996, 14(1): 58～65

[6] H. Y. Tam, 杜卫冲, Michael. S. Y. Liu. 用微透镜列阵在单模光纤中写入长周期光纤光栅的新方法. 光学学报, 1998, 18(11): 1599～1600

[7] D. C. Johnson, F. Bilodeau, B. Malo et al.. Long-length, long-period rocking filters fabricated from conventional monomode telecommunications optical fiber. Optics Letters, 1992, 17(22): 1635～1637

[8] In Kag Hwang, Seok Hyun Yun et al.. Long-period fiber gratings based on arc-induced microbends. OECC′98, 1998, 14C1-2: 144～145

[9] In Kag Hwang, Seok Hyun Yun, Erik Gentzsch et al.. Profile-controlled long-period gratings based on period microbends. OFC'99, 1999, FK6: 177～179

[10] M. Shigehara, T. Enomoto et al.. Long-period fiber grating in pure silica core fiber for high temperature use. OECC′98, 1998, 14C1-3: 146～147

[11] M. Akiyama, K. Nishide et al.. Gain flattened EDFA using residual stress released LPFG filter. OECC'98, 1998, 14C1-5: 150～151

[12] M. Akiyama, K. Nishide et al.. A novel long-period fiber grating using periodically released reidual stress of pure-silica core fiber. OFC'98, 1998, ThG1: 276～277

[13] T. Enomoto, M. Shigehara et al.. Long-period fiber grating in a pure-silica-core fiber written by residual stress relaxation. OFC′98, 1998, ThG2: 277～278

[14] E. M. Dianov, V. I. Karpov, A. S. Kurkov et al.. Long-period fiber gratings and mode-field converters fabricated by thermodiffusion in phosphosilicate fibers. ECOC′98, 1998. 395～396

[15] V. I. Karpov, M. V. Grekov et al.. Mode-field converters and long-period gratings fabricated by thermo-diffusion in nitrigen-doped silica-corefibers. OFC′98, 1998, ThG3: 279～280

[16] I. Riant, L. Gasca, P. Sansonetti et al.. Gain equalization with optimized slanted Bragg grating on adapted fiber for multichannel long-haul submarine transmission. OFC′99, 1999, THJ6-1: 147～149

[17] Ashish M. Vengsargar. Long-period fiber-gratings-based-gaine qualizers. Opt. Lett., 1996, 21(5): 336～338

[18] Kristin Lewotsky. Long-period gratings flatten fiber-amplifier gain. Laser Focus World, 1996, 32(4): 34～37

[19] Paul F. Wysocki, Justin B. Judkind, Rolando P. Espindola et al.. Broad-band erbium-doped fiber amplifier flattened beyond 40 nm using long-period grating filter. IEEE P. T. L., 1997, 9(10): 1343～1345

[20] X. J. Gu. Wavelength-division multiplesing isolation fiber filter and light source using cascaded long-period fiber gratings. Opt. Lett., 1998, 23(7): 509～510

[21] Byeong HaLee, J. Nisshii. Notch filters based on cascaded multiple long-period fiber gratings. Electron. Lett., 1998, 34(19): 1872～1873

[22] Vikram Bhatia, Ashish M. Vengsargar. Optical fiber long-period grating sensor. Opt. Lett., 1996, 21(9): 692～694

[23] J. Rathje, M. Svalgaard et al.. Sensitivity ofa long-period optical fiber grating bend sensor. OFC′98, 1998, WM49: 238～239

[24] Heather J. Patrick, Alan D. Kersey, Frank Bucholtz. Analysis of the response of long period fiber gratings to external index of refraction. IEEE J. L. T., 1998, 16(9): 1606～1612

[25] David Appell. Clad fiber detects biological agents fast. Laser Focus World, 1998, 34(4): 26～28

[26] C. D. Poole, H. M. Presby, J. P. Meester. Two-mode fiber spatial-mode converter using periodic core deformation. Electron. Lett., 1994, 30(17): 1437～1438