强激光与粒子束, 2012, 24 (1): 93, 网络出版: 2012-02-14  

气袋靶制备技术

Fabrication of gas bag target
作者单位
中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
摘要
为了研究柱腔内气体对激光-等离子体相互作用及内爆对称性的影响, 详细给出了气袋靶制备及其在神光-Ⅱ靶场的应用情况。对气袋靶的靶型设计、靶材料选择及薄膜制备和充气工艺进行了系统的研究。制备的气袋靶主要由厚度为400 nm的聚酰亚胺薄膜和厚度为400 μm的铝支撑环构成, 利用装配在支撑环上的充气管实现对气袋靶的充气, 当充气完成后, 整个气袋靶膨胀为球状。
Abstract
To study the effect of hohlraum gas on both laser-plasma interaction and implosion symmetry, the paper presents the design, material selection and fabrication of gas bag target, the filling gas technology and the implementation of the target on the Shenguang Ⅱ facility. The gas bag target is made by gluing two 400 nm thick polyimide films to a 400 μm thick aluminum (Al) washer. The target is inflated with gas through a small filling tube mounted into the aluminum washer and the polyimide is stretched to a near-spherical shape.
参考文献

[1] Turner R E, Kauffman R L, Shepard T D, et al. Laser-plasma interactions in large gas-filled hohlraums[R]. UCRL-LR-105821-95-2, 1995.

[2] Kauffman R L, Suter L J, Kornblum H N, et al. X-ray production in laser-heated Xe gas targets[R]. UCRL-LR-21058212-96-22, 1996.

[3] Stone G F, Spragge M R, Rivers C J, et al. Fabrication and testing of gas-filled targets for large-scale plasma experiments on Nova[R]. UCRL-LR-105821-95-3, 1995.

[4] Kalantar D H, Klem D E, MacGowan B J, et al. Production and characterization of large plasmas from gas bag targets on Nova[J]. Phys Plasmas, 1995, 2(8):3161-3168.

[5] Di Nicola P, Thessieux C, Raffin V, et al. Implementation of gas target on the LIL facility[J]. J Phys IV France, 2006, 133:891-894.

[6] Powers L V, Failor B H, MacGowan B J, et al. Gas-filled target designs produce ignition-scale plasma conditions with Nova[R]. UCRL-LR-105821-96-1, 1996.

[7] 张占文, 李波, 唐永建, 等.准动态柱腔充气靶制备工艺研究[J].强激光与粒子束, 2005, 17(2):209-212.(Zhang Zhanwen, Li Bo, Tang Yongjian, et al. Fabrication of the hohlraum gas-filled target connected with gas source. High Power Laser and Particle Beams, 2005, 17(2):209-212)

[8] 张占文, 黄勇, 刘一杨, 等.无源柱腔充气靶制备技术[J].强激光与粒子束, 2009, 21(1):79-82.(Zhang Zhanwen, Huang Yong, Liu Yiyang, et al. Fabrication of the hohlraum gas-filled targets without gas source. High Power Laser and Particle Beams, 2009, 21(1):79-82)

[9] 朱方华, 尹强, 张淑洋, 等.气袋靶用聚酰亚胺薄膜的制备与性能研究[J].原子能科学技术, 2009, 44(7):790-793.(Zhu Fanghua, Yin Qiang, Zhang Shuyang, et al. Fabrication and properties of polyimide film for gas-filled target. Atomic Energy Science and Technology, 2009, 44(7):790-793)

尹强, 张林, 周兰, 张淑洋, 肖江, 张伟, 朱方华. 气袋靶制备技术[J]. 强激光与粒子束, 2012, 24(1): 93. Yin Qiang, Zhang Lin, Zhou Lan, Zhang Shuyang, Xiao Jiang, Zhang Wei, Zhu Fanghua. Fabrication of gas bag target[J]. High Power Laser and Particle Beams, 2012, 24(1): 93.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!