基于Wishbone-PCI核的红外探测器注入式仿真系统

杨龙; 李范鸣; 张涌

doi:doi:10.16818/j.issn1001-5868.2017.01.024

半导体光电, 2017, 38 (1): 107, 网络出版: 2017-03-29

基于Wishbone-PCI核的红外探测器注入式仿真系统

Design of Infrared Detector Injected Simulator Based on Wishbone-PCI Core

论文大纲

杨龙李范鸣张涌

作者单位

中国科学院上海技术物理研究所, 上海 200083

注入式仿真系统红外探测器 Wishbone-PCI Wishbone-PCI FPGA FPGA injected simulator infrared detector

摘要

介绍了一种基于Wishbone-PCI桥核和Spartan-6系列FPGA的红外探测器注入式仿真系统。重点讨论了基于PCI总线的红外图像注入接口卡的设计与实现以及Wishbone-PCI桥核技术。该系统可以代替红外侦察告警设备的头部探测器将红外仿真图像数据注入到红外告警、红外搜索跟踪等设备的实时信息处理箱, 用来实现对红外侦察告警设备目标探测与目标跟踪功能的验证与仿真。该注入式仿真系统通过将前期红外侦察告警设备采集的红外图像数据与自定义的目标图像相叠加, 注入到实时信息处理箱, 因此该注入式仿真系统具有图像数据真实连续的特点, 能更加真实地模拟现实的场景, 为实时信号处理箱提供真实可靠的数据来源, 有利于加快红外侦察告警设备的研发进程, 缩短系统开发周期。

Abstract

An injected simulation system of infrared detectors based on Wishbone-PCI bridge core and Sprtan6 series FPGA were introduced. The design and implementation of the injected interface card of infrared image based on PCI bus and technology of Wishbone-PCI bridge core was discussed in detail. Replacing the head detector, the system can inject the simulation image into the real-time processing tank of infrared warning and tracking system, which can verify and simulate the target detection and tracking function. The system superposes infrared image data collected by infrared detection warning system and the custom target image, injecting to the real-time processing tank, so the system can present real and continuous data and can simulate realistic scenarios. It can provide true and reliable data source for real-time signal processing tank. It can speed up the development process of infrared detection and warning systems and shorten the development period.

参考文献

[1] 何永强,耿达, 唐德帅, 等. 基于数字微镜器件的红外场景仿真系统设计[J]. 红外技术, 2014, 36(5): 384-388.

He Yongqiang,Geng Da, Tang Deshuai, et al. Design of the IR scene simulation system based on DMD[J]. Infrared Technol., 2014, 36(5): 384-388.

[2] 庄良,张涌, 汤心溢, 等. 基于PCI总线图像注入式红外探测器仿真系统[J]. 半导体光电, 2008, 29(1): 113-116.

Zhuang Liang,Zhang Yong, Tang Xinyi, et al. Simulation system of infrared detector based on PCI bus[J]. Semiconductor Optoelectronics, 2008, 29(1): 113-116.

[3] 靳文平,符文星, 肖堃, 等. 红外导引头半实物仿真中红外图像注入器设计[J]. 电子设计工程, 2014, 22(2): 159-160.

Jin Wenping,Fu Wenxing, Xiao Kun, et al. The design of infrared image fitting infrared seeker in the semi physical simulation[J]. Electronic Design Engin., 2014, 22(2): 159-160.

[4] 马萍,唐卫华, 李绪志. 基于PCI Express总线高速数采卡的设计与实现[J]. 微计算机信息, 2008, 24(25): 116-118.

Ma Ping,Tang Weihua, Li Xuzhi. Design and implementation of high speed data acquisition card based on PCI express bus[J]. Microcomputer Information, 2008, 24(25): 116-118.

[5] 胡晓嘉.基于PCI总线的红外图像数据采集传输系统设计[D]. 武汉: 华中科技大学, 2009.

Hu Xiaojia.Design of infrared image data acquisition and transmission system based on PCI bus[D]. Wuhan: Huazhong University of Science and Technology, 2009.

[6] Dolenc M,Markovic T. PCI IP core specification[Z]. USA: Opencores, 2004.

[7] 王立娜.基于FPGA的PCI数据采集卡设计[D]. 北京: 北方工业大学, 2008.

Wang Lina.Design of PCI data acquisition card based on FPGA[D]. Beijing: North China University of Technology, 2008.

杨龙, 李范鸣, 张涌. 基于Wishbone-PCI核的红外探测器注入式仿真系统[J]. 半导体光电, 2017, 38(1): 107. YANG Long, LI Fanming, ZHANG Yong. Design of Infrared Detector Injected Simulator Based on Wishbone-PCI Core[J]. Semiconductor Optoelectronics, 2017, 38(1): 107.

基于Wishbone-PCI核的红外探测器注入式仿真系统

关于本站 Cookie 的使用提示

全站搜索

基于Wishbone-PCI核的红外探测器注入式仿真系统

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索