强激光与粒子束, 2017, 29 (8): 085105, 网络出版: 2017-06-30  

CSNS/RCS交流二极磁铁研制关键技术

Key technology of the development of the CSNS/RCS AC dipole magnet
李青 1,2,3康文 1,2,3孙献静 1邓昌东 1,2,3陈宛 1
作者单位
1 中国科学院 高能物理研究所, 北京 100049
2 东莞中子科学中心, 广东 东莞 523803
3 东莞高精度磁场测量试验室, 广东 东莞 523803
摘要
针对交流二极磁铁的磁场特性和涡流问题,利用电磁场分析软件对磁铁进行了优化设计和温度场计算,确定了交流二极磁铁关键技术的方案。对交流二极磁铁极头端面采用了罗高斯基曲线和谐波削斜的方法来提高磁铁磁场质量; 对铁芯端部和端板进行开槽优化设计,有效切断磁铁端部主要的涡流回路,降低了磁铁温升; 磁铁线圈采用铝绞线导线进行绕制,以减少磁铁线圈内的涡流损耗。最后,通过对样机磁铁的测试,磁场均满足物理要求,磁铁温度也控制在安全范围内。
Abstract
According to magnetic field properties and the eddy currents in AC dipole magnet, magnet design and the thermal simulation are performed by the electromagnetic field analysis software and the schemes of key technology are determined. The Rogowski curve and the harmonic chamfering method are applied to improve the magnetic field quality. Slit arrangement on the end plates of the dipole can cut down the eddy currents effectively and lessen the temperature rise. Coils of dipole magnet are made of Al-stranded conductors for the reduction of AC eddy losses. The measurement results and the temperature test of the prototype magnet are described and discussed. The magnetic fields of the prototype meet the requirements and the temperature rise is in the safety range.
参考文献

[1] Wang S, Fang S X, Fu S N, et al. Introduction to the overall physics design of CSNS accelerators[J]. Chinese Physics C, 2009, 33 (sⅡ): 1-3.

[2] Kang W, Deng C D, Li Q, et al. Research and development of the AC magnets for CSNS/RCS[J]. IEEE Trans Applied Superconductivity, 2012, 22(3): 4001204.

[3] Tani N, Kanazawa K, Shimada T, et al. Design of a dipole magnet for the 3-GeV proton synchrotron of the JAERI/KEK joint project[C]//Proceedings of EPAC2002. 2002: 2376-2378.

[4] Tani N, Adachi T, SomeyaH, et al. Eddy current effect of magnets for J-PARC 3-GeV synchrotron[J]. IEEE Trans Applied Superconductivity, 2004, 14(2): 421-424.

[5] Hiroo K. On a design of wide range magnet for cyclotron[J]. Nuclear Instruments and Methods,1960, 6: 213-216.

[6] 李青, 邓昌东, 康文, 等. CSNS/RCS二极磁铁样机端部优化设计与实验研究[C]//第二届全国加速器磁铁、电源技术研讨会论文集, 2010: 17-22. (Li Qing, Deng Changdong, Kang Wen, et al. The field optimization measurement of dipole prototype of CSNS/RCS//The 2nd accelerator magnet and power supply national conference proceeding, 2010: 17-22)

[7] 尹兆升, 孙献静, 杨梅, 等. 谐波垫补原理及其在加速器常规磁铁设计与磁场垫补中的应用[J]. 原子能科学与技术,2013, 47(2): 277-286.(Yin Zhaosheng, Sun Xianjing, Yang Mei, et al. Principle of harmonic shim and application for conventional accelerator magnets. Atomic Energy Science and Technology, 2013, 47(2): 277-286)

[8] Sun X J, Deng C D, Kang W. Transient electromagnetic simulation and thermal analysis of the DC biased AC quadrupole magnet for CSNS/RCS[J]. Chinese Physics C, 2012, 36 (5): 443-446.

[9] Sun X J, Li Q, Kang W, et al. Application of transient electromagnetic simulation to the DC-biased AC dipole magnet for CSNS/RCS[J]. IEEE Trans Applied Superconductivity, 2011, 26(4): 4901404.

李青, 康文, 孙献静, 邓昌东, 陈宛. CSNS/RCS交流二极磁铁研制关键技术[J]. 强激光与粒子束, 2017, 29(8): 085105. Li Qing, Kang Wen, Sun Xianjing, Deng Changdong, Chen Wan. Key technology of the development of the CSNS/RCS AC dipole magnet[J]. High Power Laser and Particle Beams, 2017, 29(8): 085105.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!