[1] C. Sun, Q. You, Y. Qiu et al.. Online machine vision method for measuring the diameter and straightness of seamless steel pipes[J]. Opt. Eng., 2001, 40(11): 2565～2571

[2] 何炳蔚, 周小龙. 线激光三维测量仪中视觉传感器规划方法研究[J]. 中国激光, 2010, 37(6): 1618～1625

    He Bingwei, Zhou Xiaolong. Research of sensor planning method in line laser three-dimensional measurement system[J]. Chinese J. Lasers, 2010, 37(6): 1618～1625

[3] 曾祥军, 霍金城, 吴庆阳. 线结构光三维测量系统扫描方向的标定[J]. 中国激光, 2012, 39(1): 0108002

    Zeng Xiangjun, Huo Jincheng, Wu Qingyang. Calibration method for scanning direction of 3D measurement system based on linear-structure light[J]. Chinese J. Lasers, 2012, 39(1): 0108002

[4] 霍龙, 张爱军, 刘伟军. 基于线结构光的视觉3D测量中光刀中心提取方法研究[J]. 计算机应用与软件, 2006, 23(10): 100～102

    Huo Long, Zhang Aijun, Liu Weijun. Research on the extraction of lasers knife center based on 3D vision measuring data with line structured light[J]. Computer Applications and Software, 2006, 23(10): 100～102

[5] 吴庆阳, 苏显渝, 李景镇 等. 一种新的线结构光光带中心提取算法[J]. 四川大学学报(工程科学版), 2007, 39(4): 151～155

    Wu Qingyang, Su Xianyu, Li Jingzhen et al.. A new method for extracting the centre-line of line structure light-stripe[J]. J. Sichuan University (Engineering Science Edition), 2007, 39(4): 151～155

[6] 吴家勇, 王平江, 陈吉红 等. 基于梯度重心法的线结构光中心亚像素提取方法[J]. 中国图象图形学报, 2009, 14(7): 1354～1360

    Wu Jiayong, Wang Pingjiang, Chen Jihong et al.. Method of linear structured light sub-pixel center position extracting based on gradient barycenter[J]. J. Image & Graphics, 2009, 14(7): 1354～1360

[7] 吴剑波, 崔振, 赵宏 等. 光刀中心自适应阈值提取法[J]. 半导体光电, 2001, 22(1): 62～64

    Wu Jianbo, Cui Zhen, Zhao Hong et al.. An adaptive threshold method for light-knife center acquisition[J]. Semiconductor Optoelectronics, 2001, 22(1): 62～64

[8] 贺忠海, 王宝光, 廖怡白 等. 利用曲线拟合方法的亚像素提取算法[J]. 仪器仪表学报, 2003, 24(2): 195～197

    He Zhonghai, Wang Baoguang, Liao Yibai et al.. Subpixel algorithm using a curve fitting method[J]. Chinese J. Scientific Instrument, 2003, 24(2): 195～197

[9] 隋连升, 李兵, 蒋庄德. 基于NURBS曲线插值的激光光刀图像中心提取方法的研究[J]. 中国激光, 2003, 30(10): 933～937

    Sui Liansheng, Li Bing, Jiang Zhuangde. Research on method of laser-knife center position extracting based on NURBS interpolation[J]. Chinese J. Lasers, 2003, 30(10): 933～937

[10] C. Steger. An unbiased detector of curvilinear structures[J]. IEEE Trans. Pattern Analysis and Machine Intelligence, 1998, 20(2): 113～125

[11] 黎明. 三维激光测量技术及应用研究[D]. 杭州: 浙江大学, 2005. 25～28

    Li Ming. Research on 3D Laser Measurement Techniques and Application[D]. Hangzhou: Zhejiang University, 2005. 25～28

[12] 张加深, 赵继广,李仕学. 三维视觉检测中单光条几何中心位置的确定方法[J]. 指挥技术学院学报, 2001, 12(3): 101～103

    Zhang Jiashen, Zhao Jiguang, Li Shixue. The way of how to compute the geometry centre of single light line in 3D measuring[J]. J. Institute of Command and Technology, 2001, 12(3): 101～103

[13] 李霖. 数字光带图像轮廓提取[D]. 成都: 四川大学, 2001. 31～33

    Li Lin. Contour Extracting from Digital Bandshaped Light Image[D]. Chengdu: Sichuan University, 2001. 31～33

[14] 刘涛, 王宗义，于秀辉. 基于自适应窗曲线拟合的结构光条纹中心提取[J]. 半导体光电, 2010, 31(1): 152～154

    Liu Tao, Wang Zongyi, Yu Xiuhui. Curve fitting method based on adaptive window for center extracting of structured light stripe[J]. Semiconductor Optoelectronics, 2010, 31(1): 152～154

[15] 许宁. 线结构光光条图像处理方法研究[D]. 哈尔滨: 哈尔滨工程大学, 2007. 46～51

    Xu Ning. Research on Image Processing of Line Structured Light Stripe[D]. Harbin: Harbin Engineering University, 2007. 46～51

[16] 吴庆阳. 线结构光三维传感中关键技术研究[D]. 成都: 四川大学, 2006. 81～82

    Wu Qingyang. A Study of Key Techniques of 3D Sensor Based on Line-Structured Light[D]. Chengdu: Sichuan University, 2006. 81～82

[17] 高世一, 杨凯珍. 变边限高斯拟合提取激光条纹中心线方法的研究[J]. 仪器仪表学报, 2011, 32(5): 1132～1137

    Gao Shiyi, Yang Kaizhen. Research on central position extraction of laser strip based on varied-boundary Gaussian fitting[J]. Chinese J. Scientific Instrument, 2011, 32(5): 1132～1137

[18] 胡姝玲, 王鑫龙, 孙昱 等. 基于CMOS相机的低相干图像中心条纹提取的算法分析[J]. 激光与光电子学进展, 2012, 49(11): 111002

    Hu Shuling, Wang Xinlong, Sun Yu et al.. Algorithm analysis on extracting the information of central fringe of low-coherence interference image of CMOS camera[J]. Laser & Optoelectronics Progress, 2012, 49(11): 111002

[19] 王伟华, 孙军华, 刘震 等. 钢轨磨耗动态测量结构光条纹中心提取算法[J]. 激光与红外, 2010, 40(1): 87～90

    Wang Weihua, Sun Junhua, Liu Zhen et al.. Stripe center extraction algorithm for structured-light in rail-way dynamic measurement[J]. Laser & Infrared, 2010, 40(1): 87～90

[20] 于秀辉. 基于机器视觉的测量系统关键技术研究[D]. 哈尔滨: 哈尔滨工程大学, 2008. 28～32

    Yu Xiuhui. Research on Key Techniques of Measurement System Based on Machine Vision[D]. Harbin: Harbin Engineering University, 2008. 28～32

[21] 王顺, 徐静珠, 张益昕 等. 结构光光条中心点信度评价方法与应用[J]. 光学学报, 2011, 31(11): 1115001

    Wang Shun, Xu Jingzhu, Zhang Yixin et al.. Reliability evaluation method and application for light-stripe-center extraction[J]. Acta Optica Sinica, 2011, 31(11): 1115001

[22] 贺俊吉, 张广军. 结构光三维视觉检测中光条图像处理方法研究［J］. 北京航空航天大学学报, 2003, 29(7): 593～597

    He Junji, Zhang Guangjun. Study on method for processing image of strip in stuctured-light 3D vision measuring technique[J]. J. Beijing University of Aeronautics & Astronautics, 2003, 29(7): 593～597

[23] 赵博华, 王伯雄, 杨博淙 等. 混合反射特性表面形貌测量中光刀条纹的提取方法[J]. 清华大学学报(自然科学版), 2011, 51(8): 1084～1088

    Zhao Bohua, Wang Boxiong, Yang Bocong et al.. Extraction method for light-sectioning stripes in the profile measurement of hybrid reflection surfaces[J]. J. Tsinghua University (Science & Technology), 2011, 51(8): 1084～1088