基于互相关算法的激光条纹中心提取 下载: 623次
[1] C. Sun, Q. You, Y. Qiu et al.. Online machine vision method for measuring the diameter and straightness of seamless steel pipes[J]. Opt. Eng., 2001, 40(11): 2565~2571
[2] 何炳蔚, 周小龙. 线激光三维测量仪中视觉传感器规划方法研究[J]. 中国激光, 2010, 37(6): 1618~1625
[3] 曾祥军, 霍金城, 吴庆阳. 线结构光三维测量系统扫描方向的标定[J]. 中国激光, 2012, 39(1): 0108002
[4] 霍龙, 张爱军, 刘伟军. 基于线结构光的视觉3D测量中光刀中心提取方法研究[J]. 计算机应用与软件, 2006, 23(10): 100~102
Huo Long, Zhang Aijun, Liu Weijun. Research on the extraction of lasers knife center based on 3D vision measuring data with line structured light[J]. Computer Applications and Software, 2006, 23(10): 100~102
[5] 吴庆阳, 苏显渝, 李景镇 等. 一种新的线结构光光带中心提取算法[J]. 四川大学学报(工程科学版), 2007, 39(4): 151~155
Wu Qingyang, Su Xianyu, Li Jingzhen et al.. A new method for extracting the centre-line of line structure light-stripe[J]. J. Sichuan University (Engineering Science Edition), 2007, 39(4): 151~155
[6] 吴家勇, 王平江, 陈吉红 等. 基于梯度重心法的线结构光中心亚像素提取方法[J]. 中国图象图形学报, 2009, 14(7): 1354~1360
Wu Jiayong, Wang Pingjiang, Chen Jihong et al.. Method of linear structured light sub-pixel center position extracting based on gradient barycenter[J]. J. Image & Graphics, 2009, 14(7): 1354~1360
[7] 吴剑波, 崔振, 赵宏 等. 光刀中心自适应阈值提取法[J]. 半导体光电, 2001, 22(1): 62~64
Wu Jianbo, Cui Zhen, Zhao Hong et al.. An adaptive threshold method for light-knife center acquisition[J]. Semiconductor Optoelectronics, 2001, 22(1): 62~64
[8] 贺忠海, 王宝光, 廖怡白 等. 利用曲线拟合方法的亚像素提取算法[J]. 仪器仪表学报, 2003, 24(2): 195~197
He Zhonghai, Wang Baoguang, Liao Yibai et al.. Subpixel algorithm using a curve fitting method[J]. Chinese J. Scientific Instrument, 2003, 24(2): 195~197
[9] 隋连升, 李兵, 蒋庄德. 基于NURBS曲线插值的激光光刀图像中心提取方法的研究[J]. 中国激光, 2003, 30(10): 933~937
[10] C. Steger. An unbiased detector of curvilinear structures[J]. IEEE Trans. Pattern Analysis and Machine Intelligence, 1998, 20(2): 113~125
[11] 黎明. 三维激光测量技术及应用研究[D]. 杭州: 浙江大学, 2005. 25~28
Li Ming. Research on 3D Laser Measurement Techniques and Application[D]. Hangzhou: Zhejiang University, 2005. 25~28
[12] 张加深, 赵继广,李仕学. 三维视觉检测中单光条几何中心位置的确定方法[J]. 指挥技术学院学报, 2001, 12(3): 101~103
Zhang Jiashen, Zhao Jiguang, Li Shixue. The way of how to compute the geometry centre of single light line in 3D measuring[J]. J. Institute of Command and Technology, 2001, 12(3): 101~103
[13] 李霖. 数字光带图像轮廓提取[D]. 成都: 四川大学, 2001. 31~33
Li Lin. Contour Extracting from Digital Bandshaped Light Image[D]. Chengdu: Sichuan University, 2001. 31~33
[14] 刘涛, 王宗义,于秀辉. 基于自适应窗曲线拟合的结构光条纹中心提取[J]. 半导体光电, 2010, 31(1): 152~154
Liu Tao, Wang Zongyi, Yu Xiuhui. Curve fitting method based on adaptive window for center extracting of structured light stripe[J]. Semiconductor Optoelectronics, 2010, 31(1): 152~154
[15] 许宁. 线结构光光条图像处理方法研究[D]. 哈尔滨: 哈尔滨工程大学, 2007. 46~51
Xu Ning. Research on Image Processing of Line Structured Light Stripe[D]. Harbin: Harbin Engineering University, 2007. 46~51
[16] 吴庆阳. 线结构光三维传感中关键技术研究[D]. 成都: 四川大学, 2006. 81~82
Wu Qingyang. A Study of Key Techniques of 3D Sensor Based on Line-Structured Light[D]. Chengdu: Sichuan University, 2006. 81~82
[17] 高世一, 杨凯珍. 变边限高斯拟合提取激光条纹中心线方法的研究[J]. 仪器仪表学报, 2011, 32(5): 1132~1137
Gao Shiyi, Yang Kaizhen. Research on central position extraction of laser strip based on varied-boundary Gaussian fitting[J]. Chinese J. Scientific Instrument, 2011, 32(5): 1132~1137
[18] 胡姝玲, 王鑫龙, 孙昱 等. 基于CMOS相机的低相干图像中心条纹提取的算法分析[J]. 激光与光电子学进展, 2012, 49(11): 111002
[19] 王伟华, 孙军华, 刘震 等. 钢轨磨耗动态测量结构光条纹中心提取算法[J]. 激光与红外, 2010, 40(1): 87~90
Wang Weihua, Sun Junhua, Liu Zhen et al.. Stripe center extraction algorithm for structured-light in rail-way dynamic measurement[J]. Laser & Infrared, 2010, 40(1): 87~90
[20] 于秀辉. 基于机器视觉的测量系统关键技术研究[D]. 哈尔滨: 哈尔滨工程大学, 2008. 28~32
Yu Xiuhui. Research on Key Techniques of Measurement System Based on Machine Vision[D]. Harbin: Harbin Engineering University, 2008. 28~32
[21] 王顺, 徐静珠, 张益昕 等. 结构光光条中心点信度评价方法与应用[J]. 光学学报, 2011, 31(11): 1115001
[22] 贺俊吉, 张广军. 结构光三维视觉检测中光条图像处理方法研究[J]. 北京航空航天大学学报, 2003, 29(7): 593~597
He Junji, Zhang Guangjun. Study on method for processing image of strip in stuctured-light 3D vision measuring technique[J]. J. Beijing University of Aeronautics & Astronautics, 2003, 29(7): 593~597
[23] 赵博华, 王伯雄, 杨博淙 等. 混合反射特性表面形貌测量中光刀条纹的提取方法[J]. 清华大学学报(自然科学版), 2011, 51(8): 1084~1088
Zhao Bohua, Wang Boxiong, Yang Bocong et al.. Extraction method for light-sectioning stripes in the profile measurement of hybrid reflection surfaces[J]. J. Tsinghua University (Science & Technology), 2011, 51(8): 1084~1088
刘振, 李声, 冯常. 基于互相关算法的激光条纹中心提取[J]. 中国激光, 2013, 40(5): 0508004. Liu Zhen, Li Sheng, Feng Chang. Laser Stripe Center Extraction Based on Cross-Correlation Algorithm[J]. Chinese Journal of Lasers, 2013, 40(5): 0508004.