[1] Shin S,Shin J,Park K,et al. Low resistivity indium tin oxide films deposited by unbalanced DC magnetron sputtering ［J］. Thin Solid Film,1999,341:225-229.

[2] Shanthi E,Dutta V,Banerjee A,et al. Electrical and optical properties of undoped and antimony-doped tin oxide film ［J］. J. Appl. Phy.,1980,51:6243-6251.

[3] Shamala K,Murthy L,Narasimha K,et al. Studies on tin oxide films prepared by electron beam evaporation and spray pyrolysis methods ［J］. Bull. Mater. Sci.,2007,27:295-301.

[4] Lewis B,Paine D. Applications and processing of transparent conducting oxides ［J］. MRS Bull.,2000,25:22-27.

[5] Coutts T,Young D,Li X. Characterization of transparent conducting oxides ［J］. MRS Bull.,2000,25:58-65.

[6] Shanthi S,Subramanian C,Ramasamy P. Investigations on the optical properties of undoped,fluorine doped and antimony doped tin oxide films ［J］. Cryst. Res. Technol.,1999,34:1037-1046.

[7] Lehmann H,Wilmer R. Preparation and properties of reactively co-sputtered transparent conducting films ［J］. Thin Solid Films,1975,27:359-363.

[8] You Z,Dong J. Surface properties of treated ITO anodes for organic light-emitting devices ［J］. Appl. Surf. Sci.,2005,249:271-276.

[9] Ho J,Chen C,Hsiao R,et al. The work function improvement on indium-tin-oxide epitaxial layers by doping treatment for organic light-emitting device applications ［J］. J. Phys. Chem. C,2007,111:8372-8376.

[10] Parker I. Carrier tunneling and device characteristics in polymer light-emitting diodes ［J］. J. Appl. Phys.,1994,75:1656-1666.

[11] Adamovich V,Cordero S,Djurovich P,et al. New charge-carrier blocking materials for high efficiency OLEDs ［J］. Org. Electron.,2003,4:77-87.

[12] Koch N,Duhm S,Rabe J. Optimized hole injection with strong electron acceptors at organic-metal interfaces ［J］. Phys. Rev. Lett.,2005,95(23):237601-1-4.

[13] Kim W,Mkinen A,Nikolov N,et al. Molecular organic light-emitting diodes using highly conducting polymers as anodes ［J］. Appl. Phys. Lett.,2002,80(26):3844-3846.

[14] Koch N,Elschner A,Rabe J,et al. Work function independent hole-injection barriers between pentacene and conducting polymers ［J］. Adv. Mater.,2005,17:330-335.

[15] Friend R,Gymer R,Holmes A,et al. Electroluminescence in conjugated polymers ［J］. Nature,1999,397:121-128.

[16] Yang Y,Huang Q,Metz A,et al. High-performance organic light-emitting diodes using ITO anodes grown on plastic by room-temperature ion-assisted deposition ［J］. Adv. Mater.,2004,16:321-324.

[17] Jong M,Ijzendoom L,Voigt D,et al. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes ［J］. Appl. Phys. Lett.,2000,77:2255-2257.

[18] Kim H,Gilmore C,Horwitz J,et al. Transparent conducting aluminum-doped zinc oxide thin films for organic light-emitting devices ［J］. Appl. Phys. Lett.,2000,76(2):259-261.

[19] Minami T. Transparent conducting oxide semiconductor for transparent electrodes ［J］. Semicond. Sci. Technol.,2005,20:35-39.

[20] Chen W,Huang C,Gao X,et al. Tuning the hole injection barrier at the organic/metal interface with self-assembled functionalized aromatic thiols ［J］. J. Phys. Chem. B,2006,110(26):26075-1-6

[21] Bender M,Trube J,Stollenwerk J. Deposition of transparent and conducting indium-tin-oxide films by the RF-superimposed DC sputtering technology ［J］. Thin Solid Films,1999,354:100-105.