[1] 费玉环．Al2O3-TiC-TiN陶瓷刀具的研制及切削性能研究［D］．济南: 山东大学,2012．

[2] 袁训亮．Al2O3-TiC-TiN纳米复合陶瓷刀具的研制及切削性能［D］．济南: 山东大学,2008．

[3] 邓建新,赵军．数控刀具材料选用手册［M］．北京: 机械工业出版,2005.

[4] LU Z J．Development of high-performance Si3N4/TiCnano-composite ceramic tool materials and investigation of their properties ［D］．Jinan: Shandong University,2005．

[5] VAGNORIUS Z,SORTY K．Effect of high-pressure cooling on life of SiAlON tools in machining of Inconel 718［ J］．Int J Advmanuftechnol,2011(54): 83-92．

[6] 周咏辉．Al2O3基纳米复合陶瓷刀具材料的研制及切削性能研究［D］．济南: 山东大学,2009．

[7] 郑光明．Sialon-Si3N4梯度纳米复合陶瓷刀具的研制及高速切削性能研究［D］．济南: 山东大学,2012．

[8] ZHAO J,YUAN X L,ZHOU Y H．Cutting performance and failure mechanisms of an Al2O3/WC/TiC micro-nano-composite ceramic tool［J］．International Journal of Refractory Metals and Hard Materials,2010(28): 330-337．

[9] 吕志杰．高性能Si3N4/TiC纳米复合陶瓷刀具材料的研制与性能研究［D］．济南: 山东大学,2005.4．

[10] POORTEMANA M,DESCAMPSA P,CAMBIERA F,et al．Silicon nitride/silicon carbide nano composite obtained by nitridation of SiC: fabrication and high temperature mechanical properties ［J］．Journal of the European Ceramic Society,2003(23): 2361-2366．

[11] 张荣波,许崇海．陶瓷刀具材料近期研究进展［J］．机械工程师,2008(1): 55-58．

[12] BITTERLICH B,BITSCH S,FRIEDERICH K．Sialon based ceramic cutting tools ［J］．Journal of the European Ceramic Society,2008,(28): 989-994．

[13] HERBERT SCHULZ,EBERHARD ABELE,何宁．高速加工理论与应用［M］．北京: 科学出版社,2010．

[14] 丁代存．Si3N4/TiC纳米复合陶瓷刀具材料的研制及其性能研究［D］．济南: 山东大学,2005．

[15] 邓强．Sialon结合SiC摩擦材料的制备与性能研究［D］．武汉: 武汉理工大学,2007．

[16] NALBANT M,ALTIN A,GOKKAYA H．The effect of cutting speed and cutting tool geometry on machinability properties of nickel base Inconel 718 super alloys ［J］．Materials and Design,2007(28): 1334-1338．

[17] 邓福铭．我国超硬刀具高速切削技术发展现状及前景［J］．硬质合金,2010,27(4): 242-246.

[18] DENG J X,SONG W L,ZHANG H,et al．Friction and wear behaviours of MoS2/Zr coatings against hardened steel ［J］．Surface Engineering,2008,24(6): 410-415．

[19] DENG J X,SONG W L,ZHANG H,et al．Performance of PVD MoS2/Zr-coated carbide in cutting processes［J］．International Journal of Machine Tools and Manufacture,2008,48(14): 1546-1552．

[20] 陈炎,刘宁．金属陶瓷刀具切削性能的研究［J］．硬质合金,2008,24(4): 226-231．

[21] 刘炳强．原位生长晶须增韧氧化招陶瓷刀具及切削性能研究［D］．济南: 山东大学, 2007: 70-76,93-103．

[22] 王亮．表面微织构刀具切削钛合金的试验研究［D］．南京: 南京航空航天大学,2012．

[23] MANABU WAKUDA,YUKIHIKO YAMAUCHI,SHUZO KANZAKI,et al．Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact［J］．Wear,2003(254): 356-363．

[24] ANDRIY KOVALCHENKO,OYELAYO AJAYI,ALI ERDEMIR,et al．The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact［J］．Tribology International,2005(38): 219-22．

[25] WANG XIAOLEI,KOJI KATO,KOSHI ADACHI,et al．The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed［J］．Tribology International,2001(34): 703-711．

[26] WANG XIAOLEI,KOJI KATO．Improving the anti-seizure ability of SiC seal in water with RIE texturing［J］．Tribology Letters,2003,14(4): 275-280．

[27] WANG XIAOLEI．Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water［J］．Tribology Internationa,2003(36): 189-197．

[28] 韩中领,汪家道,陈大融．凹坑表面形貌在面接触润滑状态下的减阻研究［J］．摩擦学学报,2009,29(1): 10-16．

[29] KAWASEGI N,SUGIMORI H,MORIMOTO H,et al．Development of cutting tools with microscale and nanoscale textures to improve frictional behavior［J］．Precision Engineering,2009, 33(3): 248-254．

[30] ENOMOTO T,SUGIHARA T．Improving anti-adhesive properties of cutting tool surfaces by nano-/micro-textures［J］．CIRP Annals-Manufacturing Technology,2010(59): 597-600．

[31] LEI SHUYING,SASIKUMAR DEVARAJAN,ZENG HU．A study of micro-pool lubricated cutting tool in machining of mild steel［J］．Journal of Materials Processing Technology,2009(209): 1612-1620．

[32] 王文君,梅雪松,王恪典,等．微纳复合织构化刀具的飞秒激光制备方法: 中国．20101012473．4［P］．2013-02-27．

[33] 吴泽,邓建新,连云崧,等．微织构自润滑刀具的切削性能研究［J］．工具技术,2011(7): 18-22．

[34] ZHENG G M,ZHAO J,SONG X Y,et al．Ultra high speed turning of Inconel 718 with Sialon ceramic tools［J］． Adv Mater Res.,2010(126-128): 653-657．

[35] BITTERLICH B,DITSCH S,FRIEDERICH K．SiAlON based ceramic cutting tools ［J］．Eur Ceram Soc.,2008(28): 989-994．

[36] ALTIN A,NALBANT M,TASKESEN A．The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools［J］．Mate Des.,2007(28): 2518-2522．

[37] 陈双坤．仿生耐磨设计的研究现状及展望［J］．机械工程师,2012(9): 45-48．

[38] 戚正风。任瑞铭．国内外刀具材料发展现状［J］．金属热处理,2008,33(1): 15-20．

[39] 邢佑强,邓建新,等．微纳复合织构自润滑刀具的制备及切削性能［J］．航空制造技术,2013(6): 42-46．