[1] 傅宏镇, 陈玉平, 魏育环 等. 碳、钨、钼和铁对GH128合金显微组织和性能的影响［J］. 钢铁研究总院学报, 1985, 5(1): 75～82

    Fu Hongzhen, Chen Yuping, Wei Yuhuan et al.. Influence of C, W, Mo and Fe on the microstructure and properties of alloy GH128［J］. CISRI Journal, 1985, 5(1): 75～82

[2] 张海泉, 赵海燕, 张彦华 等. 镍基高温合金电子束焊接热影响区微裂纹特征分析［J］. 材料工程, 2005, (3): 22～25

    Zhang Haiquan, Zhao Haiyan, Zhang Yanhua et al.. Analysis on the microfissuring behavior in the heat-affected zone of electron-beam welded nickel-based superalloy［J］. Journal of Materials Engineering, 2005, (3): 22～25

[3] 熊建钢, 胡乾午, 吴丰顺 等. 镍基高温合金激光焊接接头组织及裂纹形成原因［J］. 应用激光, 2001, 21(5): 309～312

    Xiong Jiangang, Hu Qianwu, Wu Fengshun et al.. Microstructure characteristics and weld cracking formation in nickel superalloy laser welded joints［J］. Applied Laser, 2001, 21(5): 309～312

[4] O. A. Idowu, O. A. Ojo, M. C. Chaturvedi. Effect of heat input on heat affected zone cracking in laser welded ATI Allvac 718Plus superalloy［J］. Materials Science and Engineering A, 2007, 454: 389～397

[5] N. L. Richards, R. Nakkalil, M. C. Chaturvedi. The influence of electron-beam welding parameters on heat-affected-zone microfissuring in INCOLOY 903［J］. Metallurgical and Materials Transactions A, 1994, 25(8): 1733～1745

[6] L. O. Osoba, R. K. Sidhu, O. A. Ojo. On preventing HAZ cracking in laser welded DS Rene 80 superalloy［J］. Mater. Sci. Technol., 2011, 27(5): 897～902

[7] O. A. Ojo, N. L. Richards, M. C. Chaturvedi. Contribution of constitutional liquation of gamma prime precipitate to weld HAZ cracking of cast Inconel 738 superalloy［J］. Scripta Material, 2004, 50(5): 641～646

[8] 姜华, 汤海波, 方艳丽 等. 激光熔化沉积DZ408镍基高温合金微细柱晶显微组织及性能［J］. 中国激光, 2012, 39(2): 0203004

    Jiang Hua, Tang Haibo, Fang Yanli et al.. Microstructure and mechanical properties of rapid solidified ultra-fine columnar grain Ni-base superalloy DZ408 by laser melting deposition manufacturing［J］. Chinese J. Lasers, 2012, 39(2): 0203004

[9] O. A. Ojo, Y. L. Wang, M. C. Chaturvedi. Heat affected zone liquation cracking in electron beam welded third generation nickel base superalloys［J］. Materials Science and Engineering A, 2008, 476(1-2): 217～223

[10] 钟如涛, 熊征. 连续/脉冲CO2激光熔覆高温合金K403［J］. 中国激光, 2010, 37(3): 852～857

    Zhong Rutao, Xiong Zheng. Research on continuous/pulse laser cladding superalloy K403［J］. Chinese J. Lasers, 2010, 37(3): 852～857

[11] 龚伟怀, 陈玉华, 吕榛 等. 0.2 mm厚GH4169薄片激光微焊接接头的组织性能［J］. 中国激光, 2011, 38(6): 0603008

    Gong Weihuai, Chen Yuhua, Lü Zhen et al.. Microstructure and properties of 0.2 mm thick sheet GH4169 by laser microwelding［J］. Chinese J. Lasers, 2011, 38(6): 0603008

[12] R. K. Sidhu, O. A. Ojo, M. C. Chaturvedi. Microstructural analysis of laser-beam-welded directionally solidified INCONEL 738［J］. Metallurgical and Materials Transactions A, 2007, 38(4): 858～870

[13] R. K. Sidhu, O. A. Ojo, M. C. Chaturvedi. Microstructural response of directionally solidified Rene 80 superalloy to gas-tungsten arc welding［J］. Metallurgical and Materials Transactions A, 2009, 40(1): 150～162

[14] O. A. Ojo, M. C. Chaturvedi. On the role of liquated γ′ precipitates in weld heat affected zone microfissuring of a nickel-based superalloy［J］. Materials Science and Engineering A, 2005, 403(1-2): 77～86

[15] R. K. Sidhu, N. L. Richards, M. C. Chaturvedi. Effect of aluminium concentration in filler alloys on HAZ cracking in TIG welded cast Inconel 738LC superalloy［J］. Mater. Sci. Technol., 2005, 21(10): 1119～1131