红外技术, 2016, 38 (7): 556, 网络出版: 2016-08-18   

制冷型红外探测器关键驱动与信号处理电路设计

Design of the Key Driving and Signal Processing Circuit for Cooled Infrared Detector
作者单位
北京空间机电研究所,北京 100094
摘要
驱动与信号处理电路是红外成像系统的重要组成部分,高质量的电路有利于系统获得高信噪比。针对制冷型红外探测器电学接口特点,成像电路架构采用焦面电路和信号处理电路,基于电路架构,设计出高集成度、低噪声的驱动与信号处理电路,给出部分仿真结果和电路噪声估算方法。介绍了一种软硬结合的降噪方法,最后给出了电路核心指标噪声的测试方法和具体噪声值。
Abstract
Driving and signal processing circuit is a very important part of infrared imaging system. High quality circuit is beneficial to system SNR. According to the electronic interface characteristics of cooled infrared detector, the circuit structure consists of focal plane circuit and signal processing circuit. Based on the structure, high integration and low noise driving and signal processing circuit was designed. Simulation results and noise estimation method of composing circuit was given, and noise reduction method of combination of hardware and software is also given. In the last section, the core index noise test method and concrete value are presented.
参考文献

[1] 谢宝蓉, 傅雨田, 张滢清. 480×6 长波红外探测器的低噪声采集系统设计[J]. 激光与红外, 2009, 39(11): 1177-1182.

    XIE Baorong, FU Yutian, ZHANG Yingqing. Design of the acquisition system with low noise based on 480×6 long wavelength infrared detector[J]. Laser & Infrared, 2009, 39(11): 1177-1182.

[2] 陶坤字, 李福巍, 周彦平,等. 红外焦平面成像系统动态范围自适应技术研究[J]. 红外与激光工程, 2008, 37(2): 265-269.

    TAO Kunyu, LI Fuwei, ZHOU Yanping, et al. IRFPA imaging system dynamic range adaptive adjust technology[J]. Infrared and Laser Engineering, 2008, 37(2): 265-269.

[3] 方丹. 红外焦平面阵列读出电路技术分析[J]. 红外技术, 2004, 26(2):23-28.

    FANG Dan. Skill analysis of readout intergrated circuits of IRFPA[J].Infrared Technology, 2004, 26(2): 23-28.

[4] 安永泉, 禹健. 576×6 长波红外探测器成像系统设计[J]. 激光与红外,2009, 39(2): 173-177.

    AN Yongquan, YU Jian. Infrared imaging system design for 576×6 linear detector[J]. Laser & Infrared, 2009, 39(2): 173-177.

[5] 禹健, 颜景龙. 576×6 长波红外探测器多通道高速数据采集系统设计[J]. 核电子学与探测技术, 2008, 28(6): 1272-1277.

    YU Jian, YAN Jinglong. Design of 576 × 6 infrared detector multi-channel high speed acquisition system[J]. Nuclear Electronics&Detection Technology, 2008, 28(6): 1272-1277.

[6] 陈晓东, 何锡君. 288×4 长波红外探测器关键驱动电路的设计[J]. 激光与红外, 2011, 41(5): 562-564.

    CHEN Xiao dong, HE Xi jun. Design of key driving circuits for 288×4 long-wavelength infrared detector[J]. Laser & Infrared, 2011, 41(5):562-564.

[7] 王华, 魏志勇, 张文昱, 等. 480×6 红外探测器信号处理电路设计[J].红外技术, 2009, 31(9): 504-512.

    WANG Hua, WEI Zhiyong, ZHANG Wenyu, et al. Design of 480×6 infrared focal plane array signal processing circuit[J]. Infrared Technology, 2009, 31(9): 504-512.

[8] 葛炜, 王君, 梁列国, 等. 576×6 红外焦平面阵列驱动电路的设计与实现[J]. 激光与红外, 2007, 37(6): 37(6): 530-533.

    GE Wei, WANG Jun, LIANG Lieguo, et al. Design and implementation of the 576×6 IRFPA drive circuit[J]. Laser & Infrared, 2007, 37(6):530-533.

[9] 陈晓东. 288×4 长波红外探测器数据采集模块的设计[J]. 红外技术,2001, 33(3): 137-140.

    CHEN Xiaodong. Design of signal acquisition module for 288×4 long-wavelength infrared detectors[J]. Infrared Technology, 2001, 33(3):137-140.

[10] 张钰, 邓希宁, 高旭辉. 基于空间应用的红外探测器驱动电路设计[J].激光与红外, 2015, 45(2): 150-152.

    ZHANG Yu, DENG Xining, GAO Xuhui. Design of infrared detector driver circuit for space applications[J]. Laser & Infrared, 2015, 45(2):150-152.

杨小乐, 史漫丽, 凌龙. 制冷型红外探测器关键驱动与信号处理电路设计[J]. 红外技术, 2016, 38(7): 556. YANG Xiaole, SHI Manli, LING Long. Design of the Key Driving and Signal Processing Circuit for Cooled Infrared Detector[J]. Infrared Technology, 2016, 38(7): 556.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!