影响激光近净成形残余应力的关键参数的多元回归分析

激光近净成形的激光功率、扫描速度和分层高度是成形的关键参数。掌握关键参数与影响成形质量和变形的残余应力的关系是降低残余应力与选择合适成形参数的有效途径。利用生死单元技术对钛合金激光近净成形过程进行热力耦合数值求解，得到8 组不同关键参数情况下有限元模型的残余应力分布云图，并对顶层三个位置的残余应力进行采样。对不同参数与残余应力做多元回归分析，得到多元回归方程。通过有限元分析和实验验证多元回归方程的正确性，证明多元回归方法是减少不同参数下成形件残余应力的预测与实验时间、对既定参数残余应力评估的有效方法。

Abstract

Key forming parameters of laser engineering net shaping are laser power, scanning speed and stratification height. The relationship between the key parameters and residual stress must be mastered, because the residual stress influences the forming quality and deformation. Mastering the relationship is an effective way to reduce residual stress and to choose forming parameters. Using the life and death element technology and thermo-mechanical coupled field model, 8 groups of different key parameters of the laser engineering net shaping of titanium alloy are computed. The distribution cloud of the residual stress is obtained and three samples are selected. Through the multivariate regression of different key parameters and the residual stress, the multiple regression equation is obtained. The validity of the multiple regression equation is proved by finite element analysis and experiment. The multiple regression analysis is the effective way to reduce the time of simulation and experience of the different key parameters and to estimate the residual stress of the established parameters.

参考文献

[1] B Song, S J Dong, Q Liu, et al.. Vacuum heat treatment of iron parts produced by selective laser melting:Microstructure, residual stress and tensile behavior[J]. Materials & Design, 2014, 54: 727-733.

[2] 王桂兰, 孙怡峰, 柏兴旺, 等. 电磁场对电弧熔积快速成形温度场及残余应力的影响[J]. 焊接技术, 2013, 42(3): 6-9.

Wang Guilan, Sun Yifeng, Bai Xingwang, et al.. Influence of electromagnetic field on temperature field and residual stress in arc deposition rapid prototyping[J]. Welding Technoloy, 2013, 42(3): 6-9.

[3] 来佑彬, 刘伟军, 孔源, 等. 激光快速成形TA15 残余应力影响因素的研究[J]. 稀有金属材料与工程, 2013, 42(7): 1526-1530.

Lai Youbin, Liu Weijun, Kong Yuan, et al.. Influencing factors of residual stress of Ti-6.5Al-1Mo-1V-2Zr alloy by laser rapid forming process[J]. Rare Metal Materials and Engineering, 2013, 42(7): 1526-1530.

[4] 刘昊, 虞钢, 何秀丽, 等. 送粉式激光熔覆中瞬态温度场与几何形貌的三维数值模拟[J]. 中国激光, 2013, 40(12):1203007.

Liu Hao, Yu Gang, He Xiuli, et al.. Three-dimensional numerical simulation of transient temperature field and coating geometry in powder feeding laser cladding[J]. Chinese J Lasers, 2013, 40(12): 1203007.

[5] 贾文鹏, 林鑫, 陈静, 等. 空心叶片激光快速成形过程的温度/应力场数值模拟[J]. 中国激光, 2007, 34(9): 1308-1312.

Jia Wenpeng, Lin Xin, Chen Jing, et al.. Temperature/stress field numerical simulation of hollow blade produced by laser rapid forming[J]. Chinese J Lasers, 2007, 34(9): 1308-1312.

[6] 贾文鹏, 陈静, 林鑫, 等. 激光快速成形过程中粉末与熔池交互作用的数值模拟[J]. 金属学报, 2007, 43(5): 546-552.

Jia Wenpeng, Chen Jing, Lin Xin, et al.. Numerical simulation of interaction between metal powder and melting pool during laser rapid forming[J]. Acta Metallurgica Sinica, 2007, 43(5): 546-552.

[7] 孔源, 刘伟军, 王越超, 等. 基于Logistic 回归模型的钛合金件激光直接成形工艺参数分析[J]. 中国激光, 2011, 38(11):1103005.

Kong Yuan, Liu Weijun, Wang Yuechao, et al.. Analysis of process parameters about direct laser metal deposition shaping process of titanium alloys based on Logistic regression model[J]. Chinese J Lasers, 2011, 38(11): 1103005.

[8] 倪立斌, 刘继常, 伍耀庭, 等. 基于神经网络和粒子群算法的激光熔覆工艺优化[J]. 中国激光, 2011, 38(2): 0203003.

Ni Libin, Liu Jichang, Wu Yaoting, et al.. Optimization of laser cladding process variable based on neural network and particle swarm optimization algorithms[J]. Chinese J Lasers, 2011, 38(2): 0203003.

[9] H E Cheikh, B Courant, S Branchu, et al.. Analysis and prediction of single laser tracks geometrical characteristics in coaxial laser cladding process[J]. Optics and Lasers in Engineering, 2012, 50(3): 413-422.

[10] 毛海颖, 冯仲科, 巩垠熙, 等. 多光谱遥感技术结合遗传算法对永定河土壤归一化水体指数的研究[J]. 光谱学与光谱分析,2014, 34(6): 1649-1655.

Mao Haiying, Feng Zhongke, Gong Yinxi, et al.. Researches of soil normalized difference water index (NDWI) of yongding river based on multispectral remote sensing technology combined with genetic algorithm[J]. Spectroscopy and Spectral Analysis, 2014, 34(6): 1649-1655.

[11] G Ferraioli, C Tinelli, R Lissandrin, et al.. Point shear wave elastography method for assessing liver stiffness[J]. World J Gastroenterol, 2014, 20(16): 4787-4796.

[12] 王鹏, 冯新力. 我国居民高储蓄率的原因是什么——基于多元回归方法的实证分析[J]. 财经科学, 2012, (12): 24-31.

Wang Peng, Feng Xinli. The reasons of resident′ high saving rate in our nation: Empirical analysis on the basis of multiple regression methods[J]. Finance & Economics, 2012, (12): 24-31.

王福雨, 赵吉宾, 赵宇辉, 王志国, 来佑彬, 龙雨, 刘伟军. 影响激光近净成形残余应力的关键参数的多元回归分析[J]. 激光与光电子学进展, 2015, 52(1): 011403. 王福雨, 赵吉宾, 赵宇辉, 王志国, 来佑彬, 龙雨, 刘伟军. Multiple Regression Analysis of the Key Parameters of Laser Engineering Net Shaping on Residual Stress[J]. Laser & Optoelectronics Progress, 2015, 52(1): 011403.

影响激光近净成形残余应力的关键参数的多元回归分析

关于本站 Cookie 的使用提示

全站搜索

影响激光近净成形残余应力的关键参数的多元回归分析

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索