激光等离子体和烧蚀对含能材料的激光点火过程的影响

沈瑞琪; 叶迎华; 涂建

中国激光, 2004, 31 (11): 1323, 网络出版: 2006-06-12

激光等离子体和烧蚀对含能材料的激光点火过程的影响

Effects of Plasma and Ablation on Ignition Processes of Energetic Materials under Pulsed Laser

论文大纲

沈瑞琪 ^*叶迎华涂建

作者单位

南京理工大学应用化学系, 江苏南京 210094

激光物理激光点火等离子体烧蚀硼/硝酸钾 laser physics laser ignition plasma ablation B/KNO3

摘要

通过测试激光点火的延迟时间、等离子体电荷通量和等离子体对激光的吸收能力,研究了激光等离子体和烧蚀对激光点火过程的影响。实验采用的含能材料为B/KNO3(m(B)∶m(KNO3)=40∶60),外加5%的酚醛树脂,激光器为脉冲宽度为680 μs的Nd∶YAG固体激光器。实验结果表明等离子体密度随激光能量的提高而增大,而且激光等离子体的电荷通量大于燃烧流的电荷通量。当激光能量密度低于某一临界值时,点火延迟时间随激光能量密度的提高而线性变短,然而激光能量密度超过该临界值后,激光点火延迟时间保持恒定。在实验条件下,激光等离子体几乎不吸收入射的激光能量,但是点火延迟时间的变化规律表明了烧蚀会阻碍激光能量向含能材料注入。

Abstract

The charge flux of plasma, the delay time of laser ignition and the absorbability of laser by plasma were tested to study the effects of plasma and ablation on laser ignition processes of energetic materials. Tested energetic material is B/KNO3 (m(B)∶m(KNO3)=40∶60)+additional 5% phenolic resin, 20 mg, under 37.92 MPa pressure. Laser set is a Nd∶YAG laser with 680 μs pulsed width. The density of plasma rises with increase of laser energy, and the charge flux of plasma is larger than that of combustion flow. The delay time of ignition is shorted with the rise of the energy density of laser linearly, but when the energy density increases over a critical value, the delay time keeps constant. The plasma do not almost absorb incident laser beam in the testing conditions, but experimental results of the delay time of ignition show that the ablation of laser prevents laser energy from depositing in energetic materials.

参考文献

[1] Sun Tongju, Shen Ruiqi, Dai Shizhi. Numerical simulation about the process of laser ignition [J]. Appled Laser, 1996, 16(3):110～112
孙同举,沈瑞琪,戴实之. 激光点火过程的数值模拟[J]. 应用激光, 1996, 16(3):110～112

[2] Hu Yan, Ye Yinghua, Shen Ruiqi. One dimension finite difference simulation of laser ignition [J]. Laser Technology, 2001, 25(5):331～334
胡艳,叶迎华,沈瑞琪. 激光点火过程的一维有限差分模拟[J]. 激光技术, 2001, 25(5):331～334

[3] Shen Ruiqi, Ye Yinghua, Dai Shizhi et al.. Chemical reaction process of interaction of laser and energetic materials [J]. Laser Technology, 1997, 21(4):193～195
沈瑞琪,叶迎华,戴实之等. 激光与含能材料互作用的化学反应过程[J]. 激光技术, 1997, 21(4):193～195

[4] . . The phenomenon of two-stage initiations in laser ignition pyrotechnics[J]. Acta Armamentarii (the Fascicule of Explosives and Propellants), 1996, 18(1): 12-14.

[5] Ye Yinghua, Shen Ruiqi, Dai Shizhi. Effect of phenolic resin on laser ignition of B/KNO3 [J]. Chinese J. Lasers, 1999, A26(11):1007～1010
叶迎华,沈瑞琪,戴实之. 酚醛树脂对B/KNO3点火药的激光点火特性的影响[J]. 中国激光, 1999, A26(11):1007～1010

[6] Sun Tongju. The experimental studies on the interaction characteristics of laser-pyrotechnic mixture and its mechanism [D]. Ph. D. Dissertation. Nanjing: Nanjing University of Science and Technology, 1995
孙同举. 激光与火工药剂互作用特性及机理的实验研究[D]. 博士学位论文. 南京:南京理工大学,1995

[7] Ye Yinghua, Shen Ruiqi, Dai Shizhi. The laser ignition characteristics influenced by graphite doping into B/KNO3 [J]. Applied Laser, 1988, 18(3):99～100
叶迎华,沈瑞琪,戴实之. 石墨掺杂对B/KNO3点火药的点火特性的影响[J]. 应用激光, 1988, 18(3):99～100

[8] B. N. Kondrikov, S. Cristoforetti, I. V. Grebenyuk et al.. Gasification of solid propellants and propellant ingredients under influence of thermal radiation [C]. Proc. 32nd International Annual Conference of ICT, Karlsruhe 2001, V6-1～V6-15

[9] Lu Jian, Ne Xiaowu, He Anzhi. Physics on Interaction of Laser and Materials [M]. Beijing: Mechanical Industry Press, 1996. 69
陆建,倪晓武,贺安之. 激光与材料相互作用物理学[M]. 北京:机械工业出版社,1996. 69

[10] Ye Yinghua, Shen Ruiqi, Dai Shizhi. Study on the electrical conductivity of combustion flame [C]. Proc. 26th International Pyrotechnics Seminar, Nanjing 1999. 568～572

沈瑞琪, 叶迎华, 涂建. 激光等离子体和烧蚀对含能材料的激光点火过程的影响[J]. 中国激光, 2004, 31(11): 1323. 沈瑞琪, 叶迎华, 涂建. Effects of Plasma and Ablation on Ignition Processes of Energetic Materials under Pulsed Laser[J]. Chinese Journal of Lasers, 2004, 31(11): 1323.

激光等离子体和烧蚀对含能材料的激光点火过程的影响

关于本站 Cookie 的使用提示

全站搜索

激光等离子体和烧蚀对含能材料的激光点火过程的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索