粗糙热传导表面下激光介质温度场的计算分析

连天虹; 王石语; 过振; 李兵斌; 林林; 蔡德芳; 梁兴波

doi:doi:10.3788/aos201232.0614001

光学学报, 2012, 32 (6): 0614001, 网络出版: 2012-05-16

粗糙热传导表面下激光介质温度场的计算分析

Temperature Field Analysis of Laser Medium with Rough Surface Heat Conduction

论文大纲

连天虹 ^1,*王石语 ¹过振 ¹李兵斌 ¹林林 ¹蔡德芳 ¹梁兴波 ²

作者单位

¹ 西安电子科技大学技术物理学院, 陕西西安 710071

² 固体激光技术重点实验室, 北京 100015

摘要

提出了一种计算温度场的面热源自适应调整算法，该方法通过在研究对象的封闭边界上引入虚拟面热源来求解稳态热传导方程的边值问题。建立了导热联结的具有粗糙表面介质的接触模型，在此基础上建立了随机分布的表面散热边界条件，并用面热源自适应调整算法计算了激光介质的温度场。结果表明，由于实际激光介质散热表面不能完全紧密接触，其温度场呈现一定程度的随机起伏，越靠近边界，随机起伏越明显，介质中心区域随机起伏则不明显；有效热接触面积越小，这种随机起伏越强烈。计算表明热接触面积占50%时，比接触面积占75%时温度场的随机性更明显。

Abstract

A surface heat source adjustment approach to calculate temperature field is presented in this paper. In the approach, virtual surface heat source is introduced at the boundary of the object to solve the boundary value problem of the steady-state heat conduction equation. A contact model of rough surfaces with heat conduction connection is established. On this basis, the randomly distributed boundary conditions are established, and the temperature field in the medium is computed by using the surface heat source adjustment method. The result shows that the temperature field presents some random fluctuation due to the untight contact between the actual surfaces. The fluctuation is very obvious near the boundary while it is not obvious at the center, and the smaller the effectively contacted area, the more obvious the fluctuation is. For example, the fluctuation of 50% effective contact is more obvious than that of 75%.

参考文献

[1] 周寿桓, 赵鸿, 唐小军. 高平均功率全固态激光器［J］. 中国激光, 2009, 36(7): 1605～1618

Zhou Shouhuan, Zhao Hong, Tang Xiaojun. High average power laser diode pumed solid-state lasers［J］. Chinese J. Lasers, 2009, 36(7): 1605～1618

[2] Lu Fuyuan, Gong Mali, Xue Haizhong et al.. Analysis on the temperature distribution and thermal effects in corner-pumped slab lasers［J］. Optics & Lasers Engineering, 2007, 45(1): 43～48

[3] Song Xiaolu, Li Bingbin, Guo Zhen et al.. Influences of pump beam distribution on thermal lensing spherical aberration in a LD end-pumped NdYAG laser［J］. Opt. Commun., 2009, 282(24): 4779～4783

[4] Yang Huomu, Feng Guoying, Zhou Shouhuan. Thermal effects in high-power NdYAG disk-type solid state laser［J］. Optics & Laser Technology, 2011, 43(6): 1006～1015

[5] 刘全喜, 钟鸣. 激光二极管阵列端面抽运复合棒状激光器热效应的有限元法分析［J］. 物理学报, 2010, 59(12): 8535～8541

Liu Quanxi, Zhong Ming. Analysis on thermal effect of laser-diode array end pumped composite rod laser by finite element method［J］. Acta Physica Sinica, 2010, 59(12): 8535～8541

[6] 邵杰, 李小莉, 冯宇彤等. 激光二极管端面抽运Nd:YVO4板条激光器及其热效应［J］. 光学学报, 2008, 28(3): 497～501

Shao Jie, Li Xiaoli, Feng Yutong et al.. LD-end-pumped Nd:YVO4 slab laser and its thermal effects［J］. Acta Optica Sinica, 2008, 28(3): 497～501

[7] 王超, 唐晓军, 徐鎏婧等. 输出功率11 kW的高功率固体板条激光器介质热分析［J］. 中国激光, 2010, 37(11): 2807～2809

Wang Chao, Tang Xiaojun, Xu Liujing et al.. Investigation on thermal effect of high power slab laser with 11 kW［J］. Chinese J. Lasers, 2010, 37(11): 2807～2809

[8] 李健滑, 文强, 黄春霞等. 基于边界对流传热的LD端面抽运圆柱形晶体的热效应［J］. 中国激光, 2009, 36(7): 1754～1758

Li Jianhua, Wen Qiang, Huang Chunxia et at.. Thermal effect of LD end-pumped laser crystal rods based on convective heat-transfer about side surface［J］. Chinese J. Lasers, 2009, 36(7): 1754～1758

[9] 刘海强, 过振, 王石语等. 二极管端面抽运固体激光器晶体棒与热沉接触热导研究［J］. 物理学报, 2011, 60(1): 041212

Liu Haiqiang, Guo Zhen, Wang Shiyu et al.. Research on thermal contact conductance between crystal rod and heat sink in LD end-pumped solid-state laser［J］. Acta Physica Sinica, 2011, 60(1): 041212

[10] 刘海强, 过振, 王石语等. 固体激光器中多块热沉夹持晶体散热时接触热导研究［J］. 中国激光, 2011, 38(5): 0502006

Liu Haiqiang, Guo Zhen, Wang Shiyu et al.. Research on thermal contact conductance using multi-piece heat sink to hold crystal and dissipate heat in solid-state laser［J］. Chinese J. Lasers, 2011, 38(5): 0502006

[11] 应济, 贾昱, 陈子辰等. 粗糙表面接触热阻的理论和实验研究［J］. 浙江大学学报（自然科学版）, 1997, 31(1): 104～109

Ying Ji, Jia Yu, Chen Zichen et al.. Theoretical and experimental research on the contact thermal resistance between real surface［J］. J. Zhejiang University (Natural Science), 1997, 31(1): 104～109

[12] 张渭滨. 数学物理方程［M］.北京：清华大学出版社, 2007. 276～277

Zhang Weibin. Equations of Mathematical Physics［M］. Beijing: TsingHua University Press, 2007. 276～277

[13] 张程宾, 陈永平, 施明恒等. 表面粗糙度的分形特征及其对微通道内层流流动的影响［J］. 物理学报, 2009, 58(10): 7050～7056

Zhang Chengbin, Chen Yongping, Shi Mingheng et al.. Fractal characteristics of surface roughness and its effect on laminar flow in microchannels［J］. Acta Physica Sinica, 2009, 58(10): 7050～7056

[14] 庞启龙, 陈明君, 王景贺等. KDP晶体单点金刚石车削表面形貌分形分析［J］. 强激光与粒子束, 2007, 19(9): 1487～1491

Pang Qilong, Chen Mingjun, Wang Jinghe et al.. Fractal analysis on topography of KDP surfaces by single point diamond tools method［J］. High Power Laser and Particle Beams, 2007, 19(9): 1487～1491

连天虹, 王石语, 过振, 李兵斌, 林林, 蔡德芳, 梁兴波. 粗糙热传导表面下激光介质温度场的计算分析[J]. 光学学报, 2012, 32(6): 0614001. Lian Tianhong, Wang Shiyu, Guo Zhen, Li Bingbin, Lin Lin, Cai Defang, Liang Xingbo. Temperature Field Analysis of Laser Medium with Rough Surface Heat Conduction[J]. Acta Optica Sinica, 2012, 32(6): 0614001.

粗糙热传导表面下激光介质温度场的计算分析

关于本站 Cookie 的使用提示

全站搜索

粗糙热传导表面下激光介质温度场的计算分析

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索