手持LED光源频闪检测仪的设计与实现

采用S3C2440嵌入式微处理器, 设计了一种由光电探测模块、信号调理模块、高速AD转换模块和时频谱分析波形显示模块组成的具有LED光源频闪检测功能的手持LED光源频闪检测仪。采用LabView开发了基于WINCE操作系统的时频谱分析模块, 实现了波形数据分析与保存等功能, 同时建立了系统的频闪参数模型, 通过对频闪百分比和频闪指数等参数的计算来表征光源频闪波形的特征, 并分析引起光源频闪的因素。实验结果表明, 所设计的手持LED光源频闪检测仪检测范围可达到50 Hz～20 MHz, 检测精度为一级(±3%)。完全满足检测LED光源频闪的需要。

Abstract

A LED light blinking detection designer was completed with the function of stroboscopic detector. It consisted of the photoelectric detection module, the signal conditioning module, the high-speed AD conversion module and the time-frequency spectrum analysis of waveform display module. In order to achieve the function waveform data analysis and preservation, etc., the LabView was employed to develop the time-frequency spectrum analysis module based on the WINCE operating system. The stroboscopic parameter model was established simultaneously, through the calculation of percentage of stroboscopic and stroboscopic index parameters to characterize the light stroboscopic waveform and analysis the causes of the light blinking. The experimental result shows that the detection range of the portable LED light stroboscopic detector can be up to 50 Hz ~ 20 MHz, precision for level 1 (plus or minus 3%), which could fully meet the needs of stroboscopic light speed detection.

参考文献

[1] Wilkins A, Veitch J, Lehman B. LED lighting flicker and potential health concerns: IEEE standard PAR1789 update［C］. 2010 IEEE Energy Conversion Congress and Exposition. IEEE, Atlanta, 2010:171-178.

[2] Poplawski M E, Miller N M. Flicker in solid-state lighting: measurement techniques, and proposed reporting and application criteria［C］Proceedings of CIE Centenary Conference “Towards a New Century of Light”, Paris. 2013: 173-181.

[3] Perz M. Modeling the visibility of the stroboscopic effect occurring in temporally modulated light systems［J］. Lighting Research and Technology, 2015,47:281-300.

[4] 庄晓波, 朱绍龙, 张善端.光源光输出波动的准确测量和及其影响因素［J］.照明工程学报,2009,20(1):12-19.

[5] Dubois M C, Blomsterberg A. Energy saving potential and strategies for electric lighting in future North European, low energy office buildings: A literature review［J］. Energy and Buildings, 2011,43(10):2572-2582.

[6] Mao Z, Ge L, Hua G. Removing the LED light strobe flicker by proper driver designs［C］. Solid State Lighting (China SSL), 2013 10th China International Forum on. IEEE, 2013:210-213.

[7] 李振华.ARM在直流电机调速控制器中的应用研究［D］.合肥: 安徽理工大学, 2016.

[8] 李述良,冯杰,刘文进,等.基于 S3C2440A 嵌入式系统的硬件设计［J］.黄冈师范学院学报, 2009,29(3):37-41.

[9] 杜洋.ARM小记［J］.中国无线电,2010, (004):14-18.

[10] 王锐.基于照明白光LED的室内光学无线通信系统的研究［D］.合肥: 中国科学院, 2011.

孙石震, 张国玉, 施安存, 孙悦, 段靖远, 盖轶冰. 手持LED光源频闪检测仪的设计与实现[J]. 光电子技术, 2016, 36(4): 242. SUN Shizhen, ZHANG Guoyu, SHI Ancun, SUN Yue, DUAN Jingyuan, GAI Yibing. Design and Implementation of Hand-held LED Light Stroboscopic Detector[J]. Optoelectronic Technology, 2016, 36(4): 242.

手持LED光源频闪检测仪的设计与实现

关于本站 Cookie 的使用提示

全站搜索

手持LED光源频闪检测仪的设计与实现

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索