强激光与粒子束, 2010, 22 (2): 365, 网络出版: 2010-05-28   

薄膜-泡沫复合平面调制靶的制备

Fabrication of patterned film-foam composite planar target
作者单位
中国工程物理研究院 激光聚变研究中心,四川 绵阳 621900
摘要
利用浇注法制备了具有正弦波调制图纹的溴代聚苯乙烯薄膜,并在此基础上将低密度聚-4-甲基-1-戊烯(PMP)泡沫溶胶浇注在薄膜调制图纹的表面,从而得到了薄膜-泡沫复合平面调制靶样品。较为详细的讨论了具有正弦波调制图纹的复合平面调制靶的制备方法并通过台阶仪、显微镜观测了薄膜表面条纹的起伏以及薄膜-泡沫截面的复合情况,实验结果发现,采用此种方法得到的复合平面调制靶样品,其薄膜厚度、泡沫密度易于控制,薄膜、泡沫调制界面清晰,易于微靶的加工与装配。
Abstract
The Br doped polystyrene film with the sine wave modulated pattern was fabricated and the composite planar target comprising patterned film and foam was also explored by casting the foam solution on the patterned film. Attempts to make composite planar target with sine wave pattern were be discussed and the profile was characterized by the Form Talysurf Series 2 and microscope. The target was intended for Rayleigh-Taylor instabilities.The study indicates that it is easy to controll the film thickness and foam density of the target and to fabricate and assemble the target.
参考文献

[1] Glendinning S G,CherfilS C,Colvin J,et al. Ablation front Rayleigh-Taylor growth experiments in spherically convergent geometry[R].UCRL-JC-134966,1999.

[2] Marinak M M,Remington B A,Wallace R J,et al. Nonlinear Rayleigh-Taylor evolution of a three-dimensional multimode perturbation[J]. Phys Rev Lett,1998,80(20):4426-4429.

[3] Weir S T,Chandler E A,Goodwin B T. Rayleigh-Taylor instability experiments examining feed through growth in an incompressible convergent geometry[J]. Phys Rev Lett,1998,80(17):3763-3766.

[4] Hsing W W,Barnes C W,Beck J B,et al. Rayleigh-Taylor instability evolution in ablatively driven cylindrical implosions[J].Physics of Plasmas,1997,4(5):1832-1840.

[5] 叶君建,周斌,徐翔,等. 侧照明实验用平面调制微靶的制备及参数测量[J]. 强激光与粒子束,2006,18(9): 1511-1514.(Ye Junjian,Zhou Bin,Xu Xiang,et al. Fabrication and measurement of surface perturbation tiny targets in flank illumination experiment. High Power Laser and Particle Beams,2006,18(9): 1511-1514)

[6] 周斌,孙骐,黄耀东,等. ICF分解实验中的平面调制靶和薄膜靶的研制[J]. 原子能科学技术,2004,38(1):79-83.(Zhou Bin,Sun Qi,Huang Yaodong,et al. Development of surface perturbation target and thin silicon foil target used to research Rayleigh-Taylor instability in inertial confinement fusion experiment. Atomic Energy Science and Technology,2004,38(1):79-83)

[7] 陈建荣,王珏,陈玲燕,等. 平面调制靶的表面起伏图形研究[J]. 强激光与粒子束,1996,9(4):616-622.(Chen Jianrong,Wang Jue,Chen Linyan,et al. Preparation of surface perturbation targets for inertial confinement fusion experiment. High Power Laser and Particle Beams,1996,9(4): 616-622)

[8] 陈建荣,王珏,陈玲燕,等. 用激光干涉法制备平面调制靶的表面起伏图研究[J]. 原子能科学技术,1996,30(1): 25-30.(Chen Jianrong,Wang Jue,Chen Linyan,et al. Preparation of surface perturbation figures for targets by laser interference.Atomic Energy Science and Technology,1996,30(1): 25-30)

[9] 谢军,黄燕华,孙涛,等.用SPDT技术制备正弦调制靶的表面起伏图形[J].原子能科学技术(已接收).(Xie Jun,Huang Yanhua,Sun Tao et al. Preparation of sine perturbation figures by SPDT technology.Atomic Energy Science and Technology(Acepted)

[10] 王朝阳,毛英,罗炫,等. 制备低密度pmp 泡沫中的热性能研究[J]. 强激光与粒子束,2001,13(5): 595-598.(Wang Chaoyang,Mao Ying,Luo Xuan,et al. Studies on thermodynamical properties in preparation of low-density pmp foams.High Power Laser and Particle Beams,2001,13(5):595-598)

尹强, 朱方华, 周兰, 张淑洋, 张林. 薄膜-泡沫复合平面调制靶的制备[J]. 强激光与粒子束, 2010, 22(2): 365. Yin Qiang, Zhu Fanghua, Zhou Lan, Zhang Shuyang, Zhang Lin. Fabrication of patterned film-foam composite planar target[J]. High Power Laser and Particle Beams, 2010, 22(2): 365.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!