Frontiers of Optoelectronics, 2017, 10 (1): 80, 网络出版: 2017-05-09  

Reducing the negative effects of flywheel disturbance on space camera image quality using the vibration isolation method

Reducing the negative effects of flywheel disturbance on space camera image quality using the vibration isolation method
作者单位
1 Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China
2 University of Chinese Academy of Sciences, Beijing 100039, China
3 Changchun University of Technology, Changchun 130012, China
摘要
Although the performance of space cameras has largely improved, the micro vibration from flywheel disturbances still significantly affects the image quality of these cameras. This study adopted a passive isolation method to reduce the negative effect of flywheel disturbance on image quality. A metal-rubber shock absorber was designed and installed in a real satellite. A finite element model of an entire satellite was constructed, and a transient analysis was conducted afterward. The change in the modulate transfer function was detected using ray tracing and optical transfer function formulas. Experiments based on real products were performed to validate the influence of the metal-rubber shock absorber. The experimental results confirmed the simulation results by showing that the negative effects of flywheel disturbance on the image quality of space cameras can be diminished significantly using the vibration isolation method.
Abstract
Although the performance of space cameras has largely improved, the micro vibration from flywheel disturbances still significantly affects the image quality of these cameras. This study adopted a passive isolation method to reduce the negative effect of flywheel disturbance on image quality. A metal-rubber shock absorber was designed and installed in a real satellite. A finite element model of an entire satellite was constructed, and a transient analysis was conducted afterward. The change in the modulate transfer function was detected using ray tracing and optical transfer function formulas. Experiments based on real products were performed to validate the influence of the metal-rubber shock absorber. The experimental results confirmed the simulation results by showing that the negative effects of flywheel disturbance on the image quality of space cameras can be diminished significantly using the vibration isolation method.
参考文献

[1] Pang S, Yang L, Qu G. New development of micro-vibration integrated modeling and assessment technology for high performance perforperformance spacecraft. Structure & Environment Engineering, 2007, 34 (6): 1–9.

[2] Zhong W C. Spacecraft obit and attitude parameters impact analysis for optical imaging. Dissertation for the Master Degree. Haerbin: Harbin Institute of Technology, 2009.

[3] Lee D O, Yoon J S, Han J H. Development of integrated simulation tool for jitter analysis. International Journal of Aeronautical and Space Sciences, 2012, 13(1): 64–73.

[4] Masterson R A, Miller D W, Grogan R L. Development and validation of reaction wheel disturbance models:empirical model. Journal of Sound and Vibration, 2002, 249(3): 575–598.

[5] Han X. Satellite jitter analysis based on unbalance of flywheel. Aerospace Shanghai, 2012, 29(6): 42–45.

[6] Zhang B, Wang X, Hu Y. Integrated analysis on effect of microvibration on high resolution space camera imaging. Spacecraft Recovery & Remote Sensing, 2012, 33(2): 60–66.

[7] Wang H, Wang W, Wang X, Zou G, Li G, Fan X. Space camera image degradation induced by satellite micro-vibration. Acta Photoning Sinica, 2013, 42(10): 1212–1217.

[8] Stewart D. A platform with six degree of freedom. Proceedings- Institution of Mechanical Engineers, 1965, 180(1): 371–386.

[9] Klenke S, Baca T. Structural dynamics test simulation and optimization for aerospace components. Expert Systems with Applications, 1996, 11(4): 82–89.

[10] Rudoler S, Hadar O, Fisher M, Kopeika N S. Image resolution limits resulting from mechanical vibration. Optics and Precision Engineering, 1991, 30(5): 577–589.

[11] Fu M, Liu Y, Cui M, Cao M. Metal-rubber vibration absorber for aerocraft. Optics and Precision Engineering, 2013, 21(5): 1174– 1182.

[12] Wang J.Evaluation and optimization on dynamic imaging quality of an optical remote sensor. Dissertation for the Doctoral Degree. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, 2000.

[13] Zhang Y. Imaging MTF of space camera under vibration and simulation. Optics and Precision Engineering, 2011, 19(9): 2146– 2153.

[14] Schowengerdt R A, Basedow RW, Colwell J E. Measurement of the HYDICE system MTF from flight imagery. SPIE Proceedings, 1996, 2821: 127–136.

[15] Léger D, Duffaut J, Robinet F. MTF measurement using spotlight. IEEE Proceedings of IGARRS, 1994, 4: 2010–2012.

[16] Liu C, Jing X, Daley S, Li F. Recent advances in micro-vibration isolation. Mechanical Systems and Signal Processing, 2015, 56–57: 55–80

Changcheng DENG, Deqiang MU, Junli GUO, Peng XIE. Reducing the negative effects of flywheel disturbance on space camera image quality using the vibration isolation method[J]. Frontiers of Optoelectronics, 2017, 10(1): 80. Changcheng DENG, Deqiang MU, Junli GUO, Peng XIE. Reducing the negative effects of flywheel disturbance on space camera image quality using the vibration isolation method[J]. Frontiers of Optoelectronics, 2017, 10(1): 80.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!